Improvement of road leading to Verma Apartments from Parimahal Chowk in ward No 27 Kasumpti

Amount

Excavation in earth work in all kinds of earth work including spade work, pick work, jumper work, B/work chiseling wedging out of rock etc. up to all lifts in earth work including dressing of sides and bed and disposing of excavated earth to be leveled and neatly dressed as directed by the Engineer-in-charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)

Providing and laying cement concrete 1:6:12 (1 cement: 6 sand: 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 40mm thick block

Providing and Fixing "W" Metal Beam crash Barrier single sided single "W" Metal beam crash barrier comprising of cold formed W profiled section having thickness of 3mm (un coated thickness) with frame width of 311 mm depth 83 mm and length 4318 mm(made of ISI marked HR coil confirming to IS:5986/2011 ), to be fixed on cold formed channel section post of Size 150×75×5 mm (made from ISI marked Hr coils conforming to IS 5986/2011) spaced 1.50 metre centre to centre of the post which will be of total height 1.80 metre with its height of 1.10 metre below ground level and 0.70 metre above ground level. Metal beam rail to be fixed on the vertical post with spacer channel of cold formed channel section size 150×75×5mm and 330 mm long (made from ISI Marked HR coils conforming to IS:5986/2011). All the abive components shall conform to clause 810 of MORTH & H specifications including all fittings required for erection on road side W-Beams, Posts, Spacers shall not be hot dipped galvanised with Zinc coating of 550 gm/Sqm. All bolts, nuts and washers shall be hot dipped galvanised to IS:1367 pt-XIII/1983 ( Reaffirmed 2011) for bolts and IS 14394/1996 ( reaffirmed 2011) for nuts including carriage of materials in all leads and lifts as per directions of Engineer-in-Charge.

P/F reflection mirrior at turning point for approved Quality

Providing and laying cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Foundation and plinth.

Painting two coats (excluding priming coat on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters Enamel paint other than white

Hukam Singh

Bhaw Singh Chauhan