Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹64,880
EMD Value
₹1,300
Closing Date
25 May 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER JAL SHAKTI MECH SGR
OFFICE OF THE EXECUTIVE ENGINEER JAL SHAKTI MECHANICAL DIVISION SRINAGAR
Mechanical repair works to be carried at WSS Pokhribal Stage II
2023_PHE_212042_1
PHE/MECH/e-NIT-09 of 05/2023
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
7 days
Pokhribal
As Per NIT
2 documents required · 2 mandatory
₹50
Yes
EXECUTIVE ENGINEER JAL SHAKTI MECH SGR
₹1,300
Yes
7 Jun 2023
13 May 2023
26 May 2023
13 May 2023
25 May 2023
13 May 2023
Amount
Repairs to 05-cusec split casing horizontal pump (Unit No. 01) coupled to 320 HP motor by way of :
Disconnecting the unit from the system and then decoupling the pump from the motor and dismantling the pump at the site. The job includes unbolting the pump casing top, and then removing the bearing housing. All the tools and tackles required for the job is to be arranged by the firm.
Replacement of damaged bearings by new bearings in above pumping unit. The job includes extraction of old damaged bearings from the shaft using skilled labor, tools and tackles and fitment of new bearings and greasing. The bearings shall be of FAG/SKF/ equivalent make with following specification: A) NU-412 on DE B) 6412 on NDE
Providing and fitting of 12mm carbon steel threaded studs as per sample for bolting packing glands
Re-fitting the pump, after carrying out the above repairs, and then re-installing within the pump housing. The job involves re-fitting of the pump top after providing and fitting of packing sheet, coupling with the motor and aligning properly and then testing on full load.
Repairs to foundation / base of the pumping unit No: 1 by means of following: a) Removing the motor from the base frame along with cables etc. and shifting away from work place inside the pump house. Then removing the MS base frame and then exposing the original casted anchor bolts by means okf chipping the concrete around each bolt. The job includes providing and fitting and welding of 16mm anchor bolts (04 Nos) to be welded to exposed and existing casted anchor bolts so that base frame can be anchored through the modified bolts. The job includes welding the extension part of the anchors to be welded through the MS sleeves 04 nos. of approp. size and same should be welded also to anchors as well. The job includes chipping of at least around 32mm thick (8’x2’x2’ sixe) concrete surface under the base frame areas so that MS place and rubber pads can be laid under the base frame and under the motor /pump bases, respectively. The job includes necessary hole making in base frame along with MS plate for anchoring it with bolts. The horizontal level of the top surface shall be ensured by necessary concreting / plastering so that the finished surface is smooth and leveled and the pump is aligned properly with respect to motor and suction and delivery sides b) The job includes de-rusting of MS base frame by means of removing the old paint and rust with the help of removing the old paint rust with the help of chippers and paper etc. The job includes providing fitting and welding 12mm thick 8’x2’x8’ MS Plate to the base of the MS frame from bottom side in double pass and making holes in the plate as per the holes in the plate as per the holes drilled in the flanges of the base frame. The job further includes 01 cost of red oxide primer on the base frame followed by o2 coats of enamel paint on the base frame. All the de-rusting tools and paint material shall be provided ad applied b the firm only. The job further includes anchoring the base frame to the concrete foundation by means of modified anchors and nuts as per appropriates size. c) Providing and fitting of rubber pads (20mm thick around 7 sqft total size) between the pump and motor base and MS base frame at the location of bolts for preventing vibration in the frame. The job includes drilling of holes and cutting of rubber pads as per the motor / pump base plates / holes so that bolts can be passed through the pads.
Providing and fitting of 12mm packing
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .