ADDITION ALTERATION TO GALVANIZED IRON ROOF SHEETS IN CENTER COURTYARD OF LITTLE ANGELS SCHOOL UNDER GE NW NAVY NAGAR COLABA MUMBAI

Amount

Dismantiling of Asbestos/galvalume cement (Corrugated, semicorrugated, etc.)sheets in roof covering complete all as specified and directed.

Supply and Fixing in position Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as in roof covering/claddig to wall, fixed with self tapping screws, having tensile strength of 550 Mpa yield strength and zinc (galvanised) + Aluminium combined coating of 150 GSM/PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to 7 micron Epoxy primer fixes. RMR 1040 profile width 1125mm Note : The sheet shall be fixed to MS angle with or J hook with incl. wind ties etc & wind ties shall be measured seperately all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for

M&L for fabrication of mild steel work as in posts,purlins,crane gantires, rafter ,rails,wind tie nut & bolt etc and fasteningsetc and heavy brackets framing (MS tube, beam,tee,angle,channels,flat section etc and other sections) including distance pieces,cleats etc complete all as specified and directed .

M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces including prepration of surface of any description over 10 cm width or girth not otherwise all as specified and directed

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pilars, etc but excluding ashlar facings, dressed stonework and precast concrete articles

M&L Brick work built in cement mortar 1:4 using old size sub class "B" bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed

Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete in patches all as specified and directed .

M&L plastering 20mm thick in CM 1:4 on brick or concrete surfaces on external surface of walls in two coats (15mm thick backing coat and 5mm thick setting coat) mixed with water proofing compound finished fair & even without using extra cement. (Note:WPC to be mixed in setting coat only)

M & L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M&L for preparing new plastered surfaces of wall and applying two coats of Acrylic base paint exterior grade (100% Acrylic) including bio washing etc. complete all as specified.

Prepration of new plastered surfaces of walls, pillars, cornices, priming plastered and other surfaces with alkali-resistant priming paint over a coat of wall care putty and applying two coats of distemper oil emulsion, white or tinted on walls all as specified

Dismantling wall and ceiling boards (fibre,pulp, insulation etc) or insulation boards any thickness including cover fillets

Providing and fixing 12mm thick GRG false ceiling at all heights with GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture design and patterns having moisture content less that 2% humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225 : 1987, Noncombustible as per BS 476 (Part 4) - 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T - Grid of hot dippend galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross- T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) ie 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws, the work shall be carried out as per specifications, drawing and as per directions of the Engineer -in- Charge.

satguruenterprises (BID ID -3119654)

AAGAM ENTERPRISES (BID ID -3118186)

P LAXMI AND CO. (BID ID -3105136)

Nilesh Construction (BID ID -3103997)

Unitech Enterprises (BID ID -3102806)

Bob Enterprises (BID ID -3104340)

SAHU AND SAHU CO. (BID ID -3104067)

SHREE JAGDISH FURNITURE CO. (BID ID -3099009)