Certain repair work to steel and wooden furniture including painting and polishing at Mil Stn Beas and APS and ADVS Beas under GE Kapurthala

Amount

ALMIRAH STEEL LARGE (Ser 01 to 05) Removing of old unsv shelves and S&F of new 1mm thick PGI Sheet shelves and fixing in position complete all as specified and as directed. FD-1031.

Removing of old unsv/broken legs and S&F new legs out of 1.00mm thick PGI sheet complete all as specified and as directed. FD-1031.

Removing of old unsv locks and S&F new locks to steel almirah large complete all as specified and as directed. FD-1031.

All as per Srl item No 03 above but CP handle (as per existing size) complete all as specified and as directed. FD-1031.

M&L for painting of steel Almirah large with two coats of synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and as directed. FD-1031.

TABLE DINNING 6 PERSON (Ser 06 to 10) Replacement of old unsv top by providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging around complete all as shown on drg & complete all as specified and as directed. FD-273.

Replacement of old unsv leg with new shisham wood leg well seasoned free from shake and knots complete as per drg & complete all as specified and as directed. FD-273.

All as per Srl item No 07 above but top long rail, complete all as specified and as directed. FD-273.

All as per Srl item No 07 above but top short rail, complete all as specified and as directed. FD-273.

M&L for malemine polishing of table dinning for 6 persons complete all as specified and as directed. FD-273.

ALMIRAH MEDIUM STEEL (Ser 11 to 15) Removing of old unsv shelves and S&F of new 1.00 mm thick PGI Sheet shelves and fixing in position including 02 coats of synthic enamal paint over a coat of red oxide primer by spray painting complete all as specified and as directed. FD-1032.

Removing of old unsv/broken legs and S&F new legs out of 1.00 mm thick PGI Sheet complete all as specified and as directed. FD-1032.

Removing of old unsv locks and S&F new locks to steel Almirah small, complete all as specified and as directed. FD-1032.

All as per Srl item No 13 above but CP Handle, complete all as specified and as directed.

M&L for painting of steel Almirah small with two coats of synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and as directed. FD-1032.

CHAIR CB STEEL WITH ARMS (Ser 16 to 19) Removing of old unsv bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished with nut and bolt complete all as specified and as directed. FD-75(M).

All as per Srl item No 16 above but back of Seat, complete all as specified and as directed. FD-75(M).

Removing of old unsv arms and S&F new arms rest of teak wood including polishing complete all as specified and as directed. FD-75(M).

M&L for Painting of one coat of synthetic enamel paint OG to chair complete incl preparation of old painted surface complete all as specified and as directed. FD-75(M).

CHAIR CB STEEL WITH OUT ARMS (Ser 20 to 22) Removing of old unsv bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished with nuts and bolts, complete all as specified and as directed. FD-75(M).

All as per Srl item No 20 as above but back of seat, complete all as specified and as directed. FD-75(M).

M&L for painting of one coat of synthetic enamel OG paint incl preparation of old painted surface complete all as specified and as directed. FD-75(M).

CHAIR DINING (Ser 23 to 28) Removing of old unsv front leg and S & F new front leg made of 1st class hard wood (Shisham) duly smoothed, size and shape as shown on drg, complete all as specified and as directed. FD-1105 & FD-279.

All as per Srl item No 23 here in before but rear leg -ditto-, complete all as specified and as directed. FD-1105 & FD-279

All as per Srl item No 23 above but side /front /rear rails of cane seat with 3mm dia hole for re-canning, complete all as specified and as directed. FD-1105 & FD-228.

All as per Srl item No 23 here-in-before but stiffener -ditto-, complete all as specified and as directed. FD-1105 & FD-279.

M&L for malemine polishing of chair dinning complete all as per drg, complete all as specified and as directed. FD-1105 & FD-279.

Re canning of Chair Dining with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and complete all as specified and as directed. FD-1105 & FD-279.

CHAIR VARANDAH (Ser 29 to 32) Re-canning of Chair Varandah with half round plastic cane 4 mm wide best quality in Godrej pattern as shown on drg complete all as specified and as directed. FD-256.

S&F hard rubber shoes suitable for chair Varandah, complete all as specified and as directed. FD-256.

M&L for welding to Chair Varandah where required n.exc 2.5cm in length complete all as specified and directed. FD-256

M&L for Painting of one coat of synthetic enamel paint White to chair Verandah incl preparation of old painted surface complete all as specified and as directed. FD-256.

Table Wooden 900x600x760mm with or without Drawer (Ser 33 to 39) Replacement of old unsv top by providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round,complete all as specified and as directed. FD-223, 224.

Replacement of old unsv leg with Shisham wood leg well seasoned free from shakes and knots all as per drg, complete all as specified and as directed. FD-223, 224.

All as per Srl item No 34 above but top long rail, complete all as specified and as directed. FD-223, 224.

All as per Srl item No 34 above but top short rail, complete all as specified and as directed. FD-223, 224.

All as per Srl item No 34 above but stiffener, complete all as specified and as directed. FD-223, 224.

Replacement of old and broken drawers of table by providing new drawers complete all as per drg and specified and as directed made out of 18/19mm thick pre-laminated particle board natural teak shade at the sides and the bottom of the drawers shall be of 6mm plywood commercial type complete duly fitted with fancy type approved knobs as shown on drawing & complete all as specified and as directed. FD-223, 224.

M&L for melamine polishing to table wooden 900X 600X760mm without or with drawer as shown on drawing & complete all as specified and as directed. FD-223, 224.

CHAIR EASY (Ser 40 to 46) Replacement of old unsv legs with new Shisham wood legs well seasoned free from shake and knots ccomplete all as specified and as directed. FD-229.

All as per Srl item No 40 above but side/front/rear rails of cane seat with 3mm dia hole for Recanning, complete all as specified and as directed. FD-229.

All as per Srl item No 40 above but back bottom size - 480 x20 x100mm, complete all as specified and as directed. FD-229.

All as per Srl item No 40 here-in-before but stiffener of size 50 x 25 x 500mm, complete all as specified and as directed. FD-229.

All as per Srl item No 40 here-in-before but arms of size as shown on drg, complete all as specified and as directed. FD-229.

M&L for melamine polishing to chair easy complete all as per drg, complete all as specified and as directed. FD-17/229.

Re-canning of Chair Easy with half round plastic cane of 2mm wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border,complete all as specified and as directed. FD-17/229.

TABLE 900 X 600 X 760 MM STEEL WITH AND WITHOUT DRAWER (Ser 47 to 48) Removing of unsv top of the table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging ccomplete all as specified and as directed. FD-1007/1008 Make: Century/Greenply/Action Tesa

M&L for painting of table with drawer with one coat of synthetic enamel paint OG over a coat of red oxide primer including preparation of surfaces complete all as specified and as directed. FD-1007/1008.

TABLE CENTRE (Ser 49 to 53) Replacement of old unsv top and providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round complete all as per drawing, complete all as specified and as directed. FD-274,235.

Replacement of old unsv legs with new Shisham wood leg well seasoned free from shakes and knots complete all as per drg and complete all as specified and as directed. FD-274,235.

All as per Srl item No 50 above but long rail, complete all as specified and as directed. FD-274,235.

All as per Srl item No 50 above but short rail, complete all as specified and as directed. FD-274,235.

M&L for melamine polishing to table centre complete all as shown on drg, complete all as specified and as directed. FD-274,235.

TABLE OFFICE CLERK STEEL (Ser 54 to 57) Removing of unsv top of table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging complete all as specified and as directed. Make: Century/Greenply/ Action Tesa. FD-1004.

Removing of old unsv locks from drawer and S&F new locks to drawer of Table Office Clerk Steel, complete all as specified and as directed. FD-1004.

M&L for painting of table office clk steel with one coat of synthetic enamel paint OG including preparation of surface complete all as specified and as directed. FD-1004.

S&F hard rubber shoe of best approved quality (as per existing size) complete all as specified and as directed. FD-1004.

Charpoy GI Pipe Removing of Old UNSV plywood from Charpoy GI Pipe and tightning of complete charpoy and S&F of New plywood (BWR) Commercial type of size 2000mmx900mmx12mm thick fixed with 10 nos nut & bolts including washers (3 nos on long rail & 2 nos on short rail each) including S&F flat iron stiffeners/supports 3 nos made out of 40x4mm, 850mm long as directed.. Plywood shall be ISI marked and shall be make of - Duraply/ Kitply/ Archid/ National /Greenply FD-220

TABLE PEG (Ser 59 to 63) Replacement of old unsv top by providing new top of 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round c as shown on drawing, complete all as specified and as directed. FD-277/384.

Replacement of old unsv legs with new Shisham wood legs well seasoned free from shakes and knots complete all as specified and as directed. FD-277/384.

All as per Srl item No 60 above but long rail, complete all as specified and as directed. FD-277/384.

All as per Srl item No 60 above but short rail, complete all as specified and as directed.FD-277/384.

M&L for melamine polishing to table peg complete all as shown on drg, complete all as specified and as directed. FD-277/384.

Chair Writing with Cushion (Ser 64 to 70) Replacement of old unsv front leg by providing well seasoned Shisham wood duly smoothed, size and shape as shown on drg, complete all as specified and as directed. FD-1107

All as per Srl item No 64 above but rear leg, complete all as specified and as directed. FD-1107

All as per Srl item No 64 here-in-before but stiffeners -ditto-, complete all as specified and as directed. FD-1107

All as per Srl item No 64 here-in-before but arms, complete all as specified and as directed. FD-1107

M&L for malemine polishing of chair writing complete all as per drg, complete all as specified and as directed. FD-1107

Removing of old unsv bottom seat cushioned and S & F new bottom seat cusioned cover with rexine cover all as shown on drg and as specified FD-1107

Removing of old unsv back seat cushioned and S & F new back seat cusioned cover with rexine cover all as shown on drg and as specified FD-1107

TEAPOY (Ser 71 to 75) Replacement of old unsv top by providing new top of 18/19mm thick pre-laminated Particle Board natural teak shade including 3mm thick teak wood edging all-round complete all as specified and as directed. FD-278.

Replacement of old unsv legs with new Shisham wood legs duly smoothed, size and shape as shown on drg, complete all as specified and as directed. FD-278.

All as per Srl item No 72 above but long rail, complete all as specified and as directed. FD-278.

All as per Srl item No 72 above but short rail, complete all as specified and as directed. FD-278.

M&L for melamine polishing to table Teapoy complete all as specified and as directed. FD-278.

BED PLYWOOD TOP (Ser 76 to 80) Removing of old unsv head board with legs and S&F new head board made of Shisham wood covered with plywood 4mm thick one side teak faced on front side and 6mm thick commercial plywood on back of head board and legs of Shisham wood, polishing as shown on drg and complete all as specified and as directed. FD-246.

All as per Srl item No 76 above but foot board, complete all as specified and as directed. FD-246.

Removing of old unsv long rail and S&F new Shisham wood long rail of suitable size complete all as shown on drg and complete all as specified and as directed. FD-246.

Removing of old unsv top and S&F new top of 12mm thick ply wood commercial with screws complete all as specified and as directed. Plywood shall be ISI marked and shall be of Make-Duraply/Kitply/Century/Greenply/Archid. FD-246.

M&L for melamine polishing to Bed plywood top as shown on drawing & complete all as specified and as directed. FD-246.

Table Writing (Ser 81 to 87) Replacement of old unsv top by providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging around complete all as shown on drg & complete all as specified and as directed. FD-249/275

Replacement of old unsv legs with new Shisham wood legs duly smoothed, size and shape as shown on drg, complete all as specified and as directed. FD-249/275

All as per Srl item No 82 above but long rail, complete all as specified and as directed. FD-249/275

All as per Srl item No 82 here-in-before but stiffeners -ditto-, complete all as specified and as directed. FD-249/275

Replacement of old and broken drawers of table by providing new drawers complete all as per drg and specified and as directed duly fitted with fancy type approved knobs complete all as specified and as directed and as shown on drawing. FD-249/275

Replacement of old and broken bottom door of table by providing new door complete all as per drg and specified and as directed made out of 18/19mm thick Pre-Laminated Particle Board complete duly fitted with piano hinges complete all as specified and as directed and as shown on drawing. FD-249/275

M&L for melamine polishing to table writing complete all as shown on drg, as Specified and as directed FD-249/275

CHARPOY WITH HARD TOP (Ser 88 to 89) Removing of unsv plywood and supply & fixing New ply wood BWR commercial size 6'x3'x12mm thick to same plateform with nut and bolts as suitable size complete all as specified and as directed. FD/MAP-II/01.

M&L for painting to Charpoy IP Hard Top with two coats of synthetic enamel paint black complete all as specified and as directed. FD/MAP-II/06.

CHAIR VARANDAH (Ser 90 to 92) Removing of old unsv PVC Bottom Seat from Chair Verandah and S&F of new PVC bottom seat of chair varandah complete all as specified and as directed. FD/MAP-II/06.

All as per Srl item No 90 above but back of seat of Chair Verandah, complete all as specified and as directed. FD/MAP-II/06.

M&L for painting of Chair Verandah with two coats of synthetic enamel paint white including preparation of surfaces, complete all as specified and as directed. FD/MAP-II/06.

TABLE DRESSING LADIES WITH MIRROR (Ser 93 to 96) Removing of old unsv mirror & S&F new looking mirror for table dressing ladies (size 1220x360x5mm) thick electro copper plated duly fixed in shisham wood frame & back side covered with plywood commercial 4mm thick confirming to ISI, wooden frame shall be french polished, complete all as specified and directed. FD-378.

Removing of old unsv knob and S&F new M.S. knob 25mm dia dark brown coloured complete all as specified and as directed. FD-378.

Removing of old unsv glass and supply & fixing new sliding glass 4mm thick with aluminum channel, size and shape as shown on drg complete all as specified and as directed. FD-378.

Smothening of old & new external surfaces with sand paper removing of balck dots and matching of the newly fitted components with original shade by polishing the complete all as specified and as directed. FD-378.

BED HARD STEEL (Ser 97 to 98) Removing of old unsv plywood and supply & fixing New ply wood BWR commercial of size 6.5'x3'x12mm thick to same plateform with nut and bolt of suitable size complete all as specified and as directed. FD/E6/MAP/08(R).

M&L for painting to Bed Hard Steel with two coats of synthetic enamel paint black including preparation of surfaces complete all as specified and as directed. FD/MAP-II/06.

TEAPOY VERANDAH (Ser 99 to 102) Removing of old unsv top and S&F new top made out of 18mm prelaminated particle board including 3mm thick teak wood edging all round all as per drg and complete all as specified and as directed. FD-255/383.

M&L for two coats painting of synthetic enamel paint, white shade including preparation of old painted surface complete all as specified and as directed. FD-255/383.

M&L for welding of steel frame where required n.exc 2.5 cm in length complete all as specified and as directed. FD-255/383.

S&F PVC shoes fixed on 20mm dia conduit pipe complete all as specified and as directed. FD-255/383.

CHAIR WRITING (Ser 103 to 107) Replacement of old unsv front leg by providing well seasoned Shisham wood duly smoothed, size and shape as shown on drg, complete all as specified and as directed. FD-280/250.

All as per Srl item No 103 above but rear leg, complete all as specified and as directed. FD-280/250.

All as per Srl item No 103 here-in-before but stiffeners -ditto-, complete all as specified and as directed. FD-280/250

M&L for malemine polishing of chair writing complete all as per drg, complete all as specified and as directed. FD-280/250.

Re-canning of Chair Writing with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all around border all as shown on drg and complete all as specified and as directed. FD-280/250.

Sofa Set 5 Seated (Ser 108 to 111) Removing of old unsv front leg and S&F new front leg made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, complete all as specified and as directed. FD-373.

Removing of old unsv rear leg & S&F new rear leg made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, complete all as specified and as directed. FD-373.

Removing of old unsv hand rest & S&F new hand rest made of Ist class hard wood (shisham) duly smoothed of size 730x70x35mm and shape as shown on drg, complete all as specified and as directed. FD-373.

Smoothning of external surface of sofa (Five Seated 3+1+1) with sand paper by removing of black spot and matching of the newly fitted components with original shade by polishing complete with two or more coats of French polish, complete all as specified and as directed. FD-373.

Supply only cushion of foam size 500 x 525 x 100mm of density 32 to 40, complete all as specified and as directed.

Supply of cushion cover size 525 x 575 x 100mm duly stitched from tapestry cloth, tapestry cloth should not be less than 135.00 per mtr of superior quality as approved by GE, complete all as specified and as directed.

TABLE OFFICER STEEL (Ser 114 to 117) Removing of unsv top of the table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging complete all as specified and as directed. FD-1003. Make: Century/Greenply/Action Tesa

M&L for painting of table officer steel with one coat of synthetic enamel paint OG including preparation of surface complete all as specified and as directed. FD-1003.

S&F hard rubber shoe of best approved quality (as per existing size) complete all as specified and as directed. FD-1003.

Removing of old unsv locks from drawer and S&F new locks to drawer of Table Offrs Steel, complete all as specified and as directed. FD-1003.

Locker Steel (Ser 118 to 120) Welding to locker where ever required and removing of dents and applying one coat of synthetic enamel paint spray painting OG shade inside and outside complete incl removing of old painted surface complete all as specified and shown on and as directed.

Removing of old u/s hasp and staples (locking device) and S & F new hasp and staples 100 mm long duly screwed of best quality as approved by GE complete all as specified and directed.

Removing of old u/s broken legs & S&F new legs made out of sheet PGI sheet 1mm thick complete all as specified shown on drg and as directed.

Bed Single Wooden (Ser 121 to 124) Removing of old unsv head board with legs and S&F new head board made of Shisham wood fixed with plywood 4mm thick one side teak faced on front side and 6mm thick commercial plywood on back of head board and legs of Shisham wood, polishing, complete all as specified and directed.

All as per Srl item No 121 above but foot board, complete all as specified and directed.

Removing of old unsv long rail and S&F new Shisham wood long rail of suitable size, complete all as specified and directed.

Removing of old unsv plywood and S&F new plywood of 12mm thick commercial with screws complete all as specified and directed as Plywood shall be ISI marked and shall be of Make - National Ply/ Kitply/Century /Greenply /Archid,

Mattress (Size 72"x35"x4") Removing of old unsv mattress and S&F new mattress of size (72"x35"x3"), complete all as specified and directed. (Make: Kurlon/ Sleepwell/Duraflex)

Steel Almirah Small (Ser 126 to 130) Removing of old unsv shelves and S&F of new 1.00 mm thick PGI Sheet shelves and fixing in position, complete all as specified and directed.

Removing of old unsv/broken legs and S&F new legs out of 1.00mm thick PGI sheet complete all as specified and as directed.

Removing of old unsv locks and S&F new locks to steel almirah large complete all as specified and as directed.

All as per Srl item No 128 above but CP handle (as per existing size) complete all as specified and as directed.

M&L for painting of steel Almirah small with two coats of synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and as directed

Desk Steel (18"x30") (Ser 131 to 133) Removing of old unsv top of desk and S&F of new top made of Pre-laminated particle board 18mm thick, complete all as specified and directed.

All as per Srl item No 131 above but seat of desk, complete all as specified and directed.

Removing of old unsv/broken legs and S&F new legs out of 1" MS square pipe, complete all as specified and directed.

Student Dual Desk 1" pipe with Board (size 36"x29"x 32) (Ser 134 to 136) Removing of old unsv top of desk and S&F of new top made of Pre-Laminated Particle board 18/19mm thick, complete all as specified and directed.

All as per Srl item No 134 above but seat of desk, complete all as specified and directed.

Removing of old unsv/broken legs and S&F new legs out of 1" MS square pipe, complete all as specified and directed.

Steel Almirah 78"x36"x18" (Ser 137 to 141) Removing of old unsv shelves and S&F of new 1mm thick PGI Sheet shelves and fixing in position complete all as specified and as directed.

Removing of old unsv/broken legs and S&F new legs out of 1.00mm thick PGI sheet complete all as specified and as directed.

Removing of old unsv locks and S&F new locks to steel almirah large complete all as specified and as directed.

All as per Srl item No 139 above but CP handle (as per existing size) complete all as specified and as directed.

M&L for painting of steel Almirah small with two coats of synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and as directed

Table Wooden 8'x4' (Ser 142 to 145) Replacement of old unsv top by providing new top of Pre-Laminated Particle board 18/19mm thick complete all as specified and directed.

Replacement of old unsv legs with new shisham wood legs well seasoned free from shakes and knots, complete all as specified and directed.

All as per Srl item No 143 above but long rail, complete all as specified and directed.

All as per Srl item No 143 above but short rail, complete all as specified and directed.

Lecture Stand Wooden (Ser 146 to 147)Replacement of old unsv sunmica sheet by providing new 1mm thick sunmica sheet, complete all as specified and directed.

Removing of old sides of lecture stand by providing new sides made of Pre-Laminated Particle board 18/19mm thick, complete all as specified and directed.

Table Steel (30"x48") Removing of old unsv top of table and S&F of new top made of Pre-Laminated Particle board 18/19mm thick, complete all as specified and directed.

SANMATI UDYOG (BID ID -3376078)

BALWINDER SINGH AND SONS (BID ID -3366359)

KHAZAN SINGH SAWHNEY (BID ID -3364284)