REPAIRS AND POLISHING AND PAINTING TO WOODEN AND STEEL FURNITURE ITEMS AND REPAIR REPLACEMENT OF FOAM CUSHIONS OF SOFA SETS AND OTHER ITEMS OF PARENT SQNS AND ALLIED UNITS FOR POP NOV 2020 AT NDA KHADAKWASLA

Amount

Dismantling/replacement of old U/S drawers of Table dressing gents and fixing of new drawers of pre-laminated particle board of 18mm type-II Grade-I duly fixed with 4mm thick TW beeding & beeding shall be French polished to required finish all as per drg and directed by Engineer-in-Charge. (DB-3980, FD-230,379)

Dismantling/replacement of old U/S box (size 900x300x150mm ) of Table dressing gents and fixing of new drawers of pre-laminated particle board of 18mm type-II Grade-I duly fixed with 4mm thick TW beeding & beeding shall be French polished to required finish complete all as per drg and directed by Engineer-in-Charge (FD-230,379) :-

Fixing/Fitting of loose/dismentaled table dressing gents to the wall with 3" & 1.5" Screw.directed by Engineer-in-Charge

Dismantling of old unserviceable knob of Table dressing gents of cadets room and replacing with the new Knob of approved quality as per sample kept in BSO yard and as aproved and complete all as directed by Engineer-in-Charge (FD-230,379)

Replacement of damaged/torn out table top with 18mm thick pre laminated particle boards both side laminated exterior grade type-II grade-I duly fixed with 3mm thick PVC/wooden edging. Shade of board shall be approved by GE/Engineer-in-Charge for the following items :- Table dining cadet Steel CWE/PNA/ 2001Sh 6/6

Ditto all as per item No.05 above but Table writing Cadet steel (Prelaminated board of rose wood shade with 3mm thick PVC Beeding alround). (CWE/PNA/ 396)

Repair/Welding of tables and show rack at broken locations and of dislocated parts of tubular steel sections at required places : Welding shall be max 1 inch. If more length reqd additional point to be considered.

Dismantling of unsv bend steel rod of shoe Rack steel cadet and replacement of 10mm square bar of approx. length 900mm duly welded in reqd places and applying one coat of red oxide & two coat of black SE paint complete all as directed by Engineer-in-charge

Replacement of existing tapestry and cushions of sofa set by replacing old u/s cushion with 40 density U-foam cushion 4" thick of Make sleepwell/century/Kurlon (size as per drg) including providing long cloth lining for cushion, covered with new tapestry cloth of first quality (as per sample available at BSO yard) of approved shade duly stiched in shape and provided with good quality nylon zip on one side for sofa set 5 seater for Set of 10 cushions. (FD-281/ FD-373/ FD-258)

Replacement of existing Tapestry covers of sofa set by replacing old u/s tapestry cloth with new first quality (as per sample available at BSO yard) tapestry cloth of approved shade including providing long cloth lining duly stiched to shape provided with good quality nylon zip on one side and fixing it on the existing cushions of sofa set 5 seater (Set of 10 covers). (FD-281/ FD-373)

Replacement/repair of the following items in Almirah large steel with or without shelves Almirah medium and steel cupboard for cadet multipurpose:-(FD-114, 1033, 1031 1032, CWE/PNA/SK/ 3196) Replacement of old unserviceable lock and providing & fixing new lock of good quality with double key of standard quality

Ditto all as per item No.11 above but Replacement of old broken handle and providing new MS CP handle of standard size 150mm of Godrej quality matching to Godrej model.

Ditto all as per item No.11 above but Replacement unsv hanging rod 20mm & CP-530mm long.

Ditto all as per item No.11 above but Replacement of old broken hinges and providing new MS 75mm hinges duly welded.

Ditto all as per item No.11 above but Replacement of unserviceable shelf clips as per sample existing.

Repair of bed cadet steel(CWE/2000/1 Sheet 5/6 & 6/6):- by welding at required places of dislocated parts as required.

S & F in repair of old unserviceable Seat of chair dining cadet steel (CWE/2000/1Sheet 4/6)

S & F in repair of old unserviceable back of chair dining cadet steel (CWE/2000/1Sheet 4/6)

Repair of chair dining cadet steel (CWE/2000/1Sheet 4/6) :- by welding of dislocated parts of tubular steel sections at required palces

Replacement of old unserviceable seats of chair tubular steel with arm duly canned of make Godrej Make (CH-07/CHR-07/FD 75)

Replacement of old unserviceable back of chair tubular steel with arm duly canned of Make Godrej Make (CH-07/CHR-07/FD 75)

Replacement of old unserviceable arm rest (plastic) of chair tubular steel with arm of Make Godrej (CH-07/ CHR-07/FD 75)

S & F Screw with plate washer for seat & back for chair writing for cadet of Godrej (CH-07 /FD 75) as per manufacturers description.

S & F male-female screw of arm rest chair writing cadet CHR-07 (As per sample)

Dismantling old unsv nut & bolt and replacing new nuts and bolts of chair easy cadet steel & Teapoy cadet steel complete all as directed by Engineer-in-charge. (Sketch 'Q' Godrej) & (Sketch 'R' Godrej)

M&L for preparation of old polished wooden surfaces by rubbing down to smooth with sand paper and after full removal of dust, pores/cracks if any, shall be filled with a filler made of a paste of whitening in methylated spirit and apply two coats polish with a pad of woolen cloth covered by a fine cloth on the surface in a series of overlappling circles, applying the polish sparingly but uniformly over the entire area to give an even surface having uniform texture and high gloss as directed by the Engineer-in-Charge for the following items:- Almirah medium wooden with shelves (inside & outside) (DB/3959).

Ditto all as per item No.26 above but Board notice. (CAD/FW-104, M/FW-5, CAD FW-22,F-78, CAD FW-15)

Ditto all as per item No.26 above but Chair Dining long back with velvet cloth. (Spl TP)

Ditto all as per item No.26 above but Chair Easy Aminity. (CAD/FW-4)

Ditto all as per item No.26 above but Counter cold stores. (CWE/Fur/ 16)

Ditto all as per item No.26 above but Glass show case 6’ Long x 2’6” wide x 4’6” High with green Baize

Ditto all as per item No.26 above but Hat Stand with mirror. (DB/3978)

Ditto all as per item No.26 above but Rostrum. (CWE/PNA/2001 Sheet 3, GE(K) F 122/85)

Ditto all as per item No.26 above but Show case double. (GE(K)-6/59)

Ditto all as per item No.26 above but Show case for single Museum. (GE(K)-9/54)

Ditto all as per item No.26 above but Show case for boat model. (NTS/FW of GE(K) 8/59)

Ditto all as per item No.26 above but Side board with Vitreous glass top (CM/FWR-2)

Ditto all as per item No.26 above but Show case for Museum. (GE(K) 9/54)

Ditto all as per item No.26 above but Teapoy wooden. (FD-232, 278, 382)

Ditto all as per item No.26 above but Table Centre. (FD-274)

Ditto all as per item No.26 above but Table Bed side. (DB/2343,DB/4043 FD/276)

Ditto all as per item No.26 above but Table for medals 4’x 3’x2’6”. (NTS/FW-3)

Ditto all as per item No.26 above but Table dressing gents with mirror. (FD/379/DB)

Ditto all as per item No.26 above but Table dining 6’1”x3’6”.(STAFW-16)

Ditto all as per item No.26 above but Table dish washing. (DW/Fur-1)

Ditto all as per item No.26 above but Table tea with ¼ thick glass top.(CWE/Fur-4)

M&L for scraping of old polishe wooden platform by rubbing down to smooth of sofa with scraping machiene after full removal of dust, pores/cracks if any, shall be filled with a filler made of a paste of whitening in methylated spirit and apply two coat of melamine with a pad of woolen cloth covered by a fine cloth on the surface in a series of overlappling circles, applying melamine uniformly over the entire area to give an even surface having uniform texture and high gloss as directed by the Engineer-in-Charge for Sofa set five seater FD 281

M&L for preparation of old polished wooden platform by rubbing down to smooth with sand paper and after full removal of dust, pores/cracks if any, shall be filled with a filler made of a paste of whitening in methylated spirit and apply two coat of melamine with a pad of woolen cloth covered by a fine cloth on the surface in a series of overlappling circles, applying melamine uniformly over the entire area to give an even surface having uniform texture and high gloss as directed by the Engineer-in-Charge for Platform teak wood 6'-6”x9’x9”(CAD/FW-34)

M&L for painting one coat of synthetic enamel paint on old steel/wooden surface duly preparing the surface after removing rust, dust etc. by sand paper etc & applting OG/smoke grey / PO red / signal red / black / Pale cream colour shade paint complete all as directed by Engineer-in-Charge for the following items:- Chair dining cadet steel (CWE/2000/1Sheet 4/6)

Ditto all as per item No 49 above but Rack steel 1830x 760x1905mm. (FD-126(M)

Ditto all as per item No 49 above but Table writing cadet steel 1170x600x760mm. (TP)

Ditto all as per item No 49 above but Table dining cadet steel. (CWE/2000/1 Sheet No 4/6)

Ditto all as per item No 49 above but shoe rack cadet steel. (CWE/2000/1 Sheet No 4/6)

Ditto all as per item No 49 above but Steel cupboard for multipurpose cadet (inside/outside). (CWE/PNA/ 396)

Ditto all as per item No 49 above but Steel stand for Coat Hanger for 16 hooks, 32 hooks, 28 hooks, 60 hooks. (CM/FW-5)

Ditto all as per item No 49 above but Rack iron for cycle:- (GE(K) F/88/97)10 Cycles

Ditto all as per item No 49 above but Rack iron for cycle:- (GE(K) F/88/97) 5 Cycles

Ditto all as per item No 49 above but Bed Cadet steel (Sketch-P (Godrej))

Ditto all as per item No 49 above but Chair Writing cadet of seat & back frames and handle (CHR-07)

Ditto all as per item No 49 above but Chair easy steel cadet. (Sketch-Q)

Mahesh Traders