SPL REPAIR REPLACEMENT OF OH LINE TO UG CABLE WITH LT PANEL AT ARTY BDE AND ENGR UNIT AT OLD AMRITSAR CANTT

Amount

Taking down carefully from poles ACSR conductor, any size, complete all as specified and directed

Taking down carefully from poles cross arms of any size including clamps nuts bolts etc omplete all as specified and directed

Taking down carefully from poles LT insulators, any type, complete all as specified and directed

Taking up or down LT UG cable of size 70 sqmm 3.5 Core from ground/ pole/ wall etc complete, all as specified and directed. Note : The earth work shall be measured ande paid separately,

Taking up or down LT UG cable of size 95 sqmm 3.5 Core from ground/ pole/ wall etc complete, all as specified and directed. Note : The earth work shall be measured and paid separately,

Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 10 Sqmm 4 core, 1100 Volts, heavy duty XLPE insulated, PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductor complete, all as specified and directed.

Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 16 Sqmm 4 core, 1100 Volts, heavy duty XLPE insulated, PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductor complete, all as specified and directed.

Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 25 Sqmm 3.5 core, 1100 Volts, heavy duty XLPE insulated, PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductor complete, all as specified and directed

Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 35 Sqmm 3.5 core, 1100 Volts, heavy duty XLPE insulated, PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductor complete, all as specified and directed

Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 50 Sqmm 3.5 core, 1100 Volts, heavy duty XLPE insulated, PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductor complete, all as specified and directed

Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 70 Sqmm 3.5 core, 1100 Volts, heavy duty XLPE insulated, PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductor complete, all as specified and directed

Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 95 Sqmm 3.5 core, 1100 Volts, heavy duty XLPE insulated, PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductor complete, all as specified and directed

Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 150 Sqmm 3.5 core, 1100 Volts, heavy duty XLPE insulated, PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductor complete, all as specified and directed

Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 185 Sqmm 3.5 core, 1100 Volts, heavy duty XLPE insulated, PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductor complete, all as specified and directed

Material and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Each pit not less than 2.25 m deep below normal ground level with top edge of plate not less than 1.50 m below normal ground level) connected to GI strip 32 x 6 mm , by means of bolts, nuts, and check nuts and washers etc encased in GI protection pipe 40 mm dia light grade for protection of GI earth strip both to be provided to the extent of 7.5 meters, all as shown on electrical plate No 3 of MES SSR - 2009 Part - I, GI protection pipe buried in ground, laid under floors / plinths or mixed on walls / pole etc or concealed in walls etc; with provision of mixture of charcoal dust and common salt packed upto minimum 150 mm all around the earth plate, includinguding PCC 1:2:4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with GI 20 mm dia medium grade pipe and MS funnel with wire mesh for watering arrangement, includinguding necessary excavation and earth work in any type of soil / strata and testing on completion complete all as specified and directed. Note:- i) Cost of GI strip 32 x 6 mm and protection pipe 40 mm dia is deemmed to be includinguded in rate quoted ii) Excavation and returning filling of Soil, any type, is deemed to be included in the quoted rates.

Material and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Each pit not less than 2.25 m deep below normal ground level with top edge of plate not less than 1.50 m below normal ground level) connected to GI wire 4 mm , by means of bolts, nuts, and check nuts and washers etc encased in GI protection pipe 15 mm dia light grade pipe for protection of GI earth strip both to be provided to the extent of 7.5 meters, all as shown on electrical plate No 3 of MES SSR - 2009 Part - I, GI protection pipe buried in ground, laid under floors / plinths or mixed on walls / pole etc or concealed in walls etc; with provision of mixture of charcoal dust and common salt packed upto minimum 150 mm all around the earth plate, includinguding PCC 1:2:4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with GI 20 mm dia medium grade pipe and MS funnel with wire mesh for watering arrangement, includinguding necessary excavation and earth work in any type of soil / strata and testing on completion complete all as specified and directed. Note:- i) Cost of GI wire 4 mm and protection pipe 15 mm dia is deemed to be includinguded in rate quoted ii) Excavation and returning filling of Soil any type is deemed to be included in the quoted rates.

Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type, IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm 90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 500 amps capacity , 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed. (a)MCCB 250 Amp,415 V four pole with thermal magnetic setting with Breaking Cap 36 KA-01 No (Incoming) (b) MCCB 63 Amps 415V 04 pole with thermal magnetic setting breaking cap 18KA - 08 Nos (For Out Going) (c) MCCB 100 Amps,415V, (4P) with breaking capacity 25 KA -04 Nos (For Out Going) (d) Volt Meter (digital Type (0 -500 Volts)-01 No (e ) Ammeter (digital type) with CTs 0-300Amps)-01 No (f) Phase indication lamps LED type with holder-01 Set(Set of Three)

Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type, IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm 90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 500 amps capacity , 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed. (a)MCCB 200 Amp,415 V four pole with thermal magnetic setting with Breaking Cap 36 KA-01 No (Incoming) (b) MCCB 63 Amps 415V 04 pole with thermal magnetic setting breaking cap 18KA - 04 Nos (For Out Going) (c) MCCB 100 Amps,415V, (4P) with breaking capacity 25 KA -04 Nos (For Out Going) (c) Volt Meter (digital Type (0 -500 Volts)-01 No (d ) Ammeter (digital type) with CTs 0-300Amps)-01 No (e) Phase indication lamps LED type with holder-01 Set(Set of Three) Note:- 1. The Panel Should be CPRI approved 2.The rates Quoted shall includingude for earth work and excavation for angle iron frame for foundation of panel board up to 0.45 m below GL in any type of soil and PCC 1:4:8 type D2 filling in foundation. The ground clearance of panel board shall be 0.45 m from GL to the bottom of panel board.

Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type, IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm 90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 500 amps capacity , 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed. (a) MCCB 200 Amp,415 V four pole with thermal magnetic setting with Breaking Cap 36 KA-01 No (Incoming) (b) MCCB 100Amps 415V 04 pole with thermal magnetic setting breaking cap 18KA - 11 Nos (For Out Going) (c) Volt Meter (digital Type (0 -500 Volts)-01 No (d) Ammeter (digital type) with CTs 0-300Amps)-01 No (e) Phase indication lamps LED type with holder-01 Set(Set of Three)

Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type, IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm 90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 300 amps capacity (04 Nos), 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed. (a) MCCB 160 Amp,415 V four pole with thermal magnetic setting with Breaking Cap 36 KA-01 No (Incoming) (b) MCCB 63 Amps 415V 04 pole with thermal magnetic setting breaking cap 18KA - 7 Nos (For Out Going) (c) Volt Meter (digital Type (0 -500 Volts)-01 No (d) Ammeter (digital type) with CTs 0-300Amps)-01 No (e) Phase indication lamps LED type with holder-01 Set(Set of Three)

Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type, IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm 90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 200 amps capacity (04 Nos), 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed (a)MCCB 100 Amp,415 V four pole with thermal magnetic setting with Breaking Cap 25 KA-01 No (Incoming) (b) MCCB 40 Amps 415V 04 pole with thermal magnetic setting breaking cap 18KA -5 Nos (For Out Going) (c) Volt Meter (digital Type (0 -500 Volts)-01 No (d ) Ammeter (digital type) with CTs 0-300Amps)-01 No (e) Phase indication lamps LED type with holder-01 Set(Set of Three) Note: (for Ser Item No. 17 to 21). - 1. The Panel Should be CPRI approved 2. The rates Quoted shall be included for earth work, excavation, angle iron frame for foundation of panel board up to 0.45 m below GL in any type of soil and PCC 1:4:8 type D2 filling in foundation. The ground clearance of panel board shall be 0.45 M from GL to the bottom of panel board as directed by Engineer-in-Charge.

Supply ,Installing, commissioning and testing in replacement LT bus bar, factory made, out door, IP_56, vermin proof, dust proof, cubical type, vermin proof , dust proof, water proof made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and angle iron frame of size 50x50x5mm inside depth not less than 50 cm and size suitable to accommodate the following accessories, with insulated alluminium busbar 400amps capacity , 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , includinguding cable trench duly painted with two coats of synthetic enamel paint over a coat of red oxide primer both internally and externally connecting with existing cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed. (a) MCCB 200 Amp four pole with Breaking Cap 25 KA-01 No (Incoming) (b) Volt Meter (digital Type (0 T0 600 Volts)-01 No (c) Ammeter (digital type) with Cts 0-300Amps)-01 No (d) Phase indication lamps LED type with holder-01 Set(Set of Three)

Material and labour loop in box with Heavy duty 4 way connector and MCB SP 6 Amps B series -01 No including clamps made of GI flat 25x4 mm with nut bolts washers etc all as directed by Engineer-in-Charge. Make- Sintex model GSJB 3020 or equivalent in Hensel/ National as approved by GE

Supply and laying of HDPE DWC pipe of 75 mm dia for protection to LT cables complete all as specified and direceted.

Supply and laying of HDPE DWC pipe of 100 mm dia for protection to LT cables complete all as specified and direceted.

Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 m in depth and getting out as in foundation of pipes, wells, cesspits, manhole, cables etc complete all as specified and directed.

Returning, filling in, includinguding spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in each layer complete all as specified and directed.

Removing surplus excavated material surplus spoil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50 m above the starting point complete, all as specified and directed.

Material and Labour for road cutting for laying of protection pipes complete all as specified and directed by Engineer-in-Charge.

Material and Labour for PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) for redressing of road surfaces etc, complete all as specified and directed.

Material and labour for boring of holes under road, (pavment) hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

SUN MANN ENGINEERS (BID ID -3172703)

Bharat Builder (BID ID -3172157)

kailu construction co (BID ID -3172272)

R D Bansal (BID ID -3177785)

Raman Electric Trading Co (BID ID -3171675)

Northern cable fault locatoers (BID ID -3171396)

SUN CHEMICALS (BID ID -3177725)

SAINI AND SAINI BUILDERS (BID ID -3172247)

PAWAN KUMAR GOVT. CONTRACTORS (BID ID -3172674)