Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 LAccepted-AOC 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹7.6 L+₹2.8 L (57.2%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | s s construction L1 | Sarbat Construction Co L2 |
|---|---|---|---|---|---|
| 1.00 | Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud , or water, scoring sunken surfaces in roads, paths , etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal )
but making good by applying tack coat @ 5 kg per 10 sq m , putting in premixed bitumenous macadem, well rammed and sealed with binder 9.8 kg per 10 sq m , blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed ( including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and as directed | 2.5 | X Sqm | 2,000 ₹5,000 Lowest | 3,011 ₹7,527.5 |
| 2.00 | Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Paving Bitumen of Viscosity Grade VG-10) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content of viscosity grade VG-30 by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using 8 to 10 tonne power roller, complete all as specified and as directed
Note:-The minimum consolidated thickness will be 30mm. However it may be increased at places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting their rates. | 136 | X Sqm | 2,000 ₹2,72,000 Lowest | 3,011 ₹4,09,496 |
| 3.00 | Applying evenly a priming / Tack coat with bituminious primer at 5 kg/ 10 sqm complete all as specified and as directed | 110 | X Sqm | 200 ₹22,000 Lowest | 311 ₹34,210 |
| 4.00 | Premix bituminous macadam with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade VG-30 grade by weight of total mix (Consolidated thickness 75mm or less), laid / rolled and compacted to required gradient and camber using power roller 8 to 12 tonne, complete all as specified and as directed | 55 | Cubic metre | 3,200 ₹1,76,000 Lowest | 5,011 ₹2,75,605 |
| 5.00 | Material and labour for hot applied thermo setting road marking paint 2mm thick in shapes/ signs as required including preparation of surfcaes and glass beads retro reflective type as per ASTM standards complete all as specified and as directed | 51 | Sqm | 200 ₹10,200 Lowest | 700 ₹35,700 |
Tender Value
₹8.7 L
EMD Value
₹17,500
Closing Date
4 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Amit Bhardwaj
MES, HQ CWE Jammu PIN-900172
SPECIAL REAPIR TO MT GARAGE ROAD OF 36 IBSC IN SUNJUWAN MIL STN UNDER GE JAMMU
2025_MES_723629_1
CWE/JP-29/2025-26
Open Tender
Civil Works - Roads
Item Rate
120 days
GE Jammu
As per tender documents
9 documents required · 9 mandatory
₹500
Yes
GE Jammu
₹17,500
Yes
18 Sept 2025
31 Jul 2025
6 Sept 2025
31 Jul 2025
4 Sept 2025
21 Aug 2025
31 Jul 2025 - 2 Aug 2025
Amount
Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud , or water, scoring sunken surfaces in roads, paths , etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal ) but making good by applying tack coat @ 5 kg per 10 sq m , putting in premixed bitumenous macadem, well rammed and sealed with binder 9.8 kg per 10 sq m , blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed ( including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and as directed
Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Paving Bitumen of Viscosity Grade VG-10) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content of viscosity grade VG-30 by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using 8 to 10 tonne power roller, complete all as specified and as directed Note:-The minimum consolidated thickness will be 30mm. However it may be increased at places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting their rates.
Applying evenly a priming / Tack coat with bituminious primer at 5 kg/ 10 sqm complete all as specified and as directed
Premix bituminous macadam with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade VG-30 grade by weight of total mix (Consolidated thickness 75mm or less), laid / rolled and compacted to required gradient and camber using power roller 8 to 12 tonne, complete all as specified and as directed
Material and labour for hot applied thermo setting road marking paint 2mm thick in shapes/ signs as required including preparation of surfcaes and glass beads retro reflective type as per ASTM standards complete all as specified and as directed
Sarbat Construction Co (BID ID -3416458)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .