Electrical works

Amount

Design, Supply, Testing and commissioning of 12 Meters Mini mast lighting unit Bajaj / Philips make of ISI equivalent complete with hot dip galvinized and suitable for 45 Met / sec wind Velocily and above . The Mini mast structure should have hend hence . Single ring and provided with galvanized lantern carriage suitable for and with 6 Nos of 150W LED Luminaries with manual ladder arrangement with safety Rung & feeder pillar Box with Automatic timer system including wiring etc , complete as specified in the relevant ISS .

Erection of the Mini Mast by providing Concreting 1 : 2 : 4 Mix R.C.C masonary foundation pedestal. The RCC pedestal projection should be 30 cms above the ground level. The feeder pillar box should also be mounted in RCC pedestal with projection of 30 cms above the ground level & foundation suitable to the safe bearing capacity of the soil at 12T / M2 at 1.5m depth of below ground level and necessary galvanized foundation bolts nuts washers and Anchor plate & Tmeplate etc. complete as per standard specification of IS -875-1987 .

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour

Supply and fixing of 65mm dia GI pipe (Class 'B') of 4 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom and with concreting and construction on masonary pedestal with MS box of 30cm x 20cm x 10cm with angle iron frame work with door with lock and key arrangements and with supply and fixing of post top lantern fitting of (integral type) with and necessary accessories with complete set with spherical / ribbed / conical acrylic cover suitable for 15W LED Bulb with supply and fixing of 1 No. 15W LED Bulb and with supply and fixing of 16A fuse unit (500V), 5A SP switch inside the MS box and painting with suitable colour

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing 2 no's of 48W LED street light fitting with LED (Higher end) with , 2 no's 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour

Supply and fixing of ornamental decorative lawrn fitting philips make CERCO model 1.05meter height with 10 watts led bulb and concreating and construction of masonary padastal at a height of 2 feet above the ground level with nessary connection

Supply and laying of 3.5 x 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metreputting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clarnping of 3.5 x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and clarnping of 3.5 x 25 sq.mm. PVC LTUG armoured cable in 32mm HDPE PIPE on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 35sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and erection of Timer control panel made up of 18SWG MS sheet fabricated as a box of size 3'X2.5'X1.5' with lock and key arrangements with 3 compartments for timer control gears, bus bar chamber and outgoing MCB and for timer 1 no L&T 4 pole contactor MCS 3 32 A and havells 24 Hour analog time switch DHTED 30016 through backlite 4way connector and 1 no 63A 4P MCB isolator as incoing and 3 Nos 40A 4P MCB isolator as incoing and 3 nos 40A 4P MCBs are outgoing with common busbar of 1/2X1/8 copper flat interconnecting using suitable size of copper wires and grouting the panel on the wall with necessary connection

Supply and fixing of TNEB meter board suitable for 3 phase 63A service connection using sintex make three phase double door EB metering Box (moduled) comprising 3 nos 63A fuse unit and 1 no 63A neutral link with a base of 6sqmm hylum sheet and 1 no 63A 4PMCB isolator with necessary connection.

Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clarnping of 4 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and clarnping of 4 x 10 sq.mm. PVC LTUG armoured cable in 32mm HDPE PIPE on post or on wall with MS clamps

Supply and fixing of brass cable gland for 4 x 10 sq.mm. LTUG armoured cable with earth connection

Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clarnping of 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and clarnping of 2 x 10 sq.mm. PVC LTUG armoured cable in 32mm HDPE PIPE on post or on wall with MS clamps

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire for earth connection

Supply and erection of outdoor panel made up of 18SWG MS sheet Fabricated as a box of size 4'X3.5'X2' with Double door and lock and key arrangements with 6mm thick hylem sheet separation for control gears and concreting and fixing the outdoor box channel in the concrete pedestal for the height of 4 feet from the ground floor with cable adopter box with section plate for connecting the cble with painting of suitable colour

Sub total

ANNAI ELECTRICALS (BID ID -1082219)

Jaya Sudha Electrical Contractor (BID ID -1083586)

U.S. ELECTRICALS (BID ID -1083044)