ELECTRICAL WORK.

Amount

fo|qr forj.k [k.M&fMckbZ ds dk;Z{ks= esa iw.kZ tek ;kstukUrxZr ¼>ViV@fuos”k fe= iksVZy½ ij izkIr vkosnu tSls ;Fkk vkS|ksfxd] okf.kfT;d] ykbZu f”kf¶Vax o ljdkjh fo|qr la;kstu ¼is;ty ;kstuk@ty thou fe”ku½ o vU; la;kstu “kh?kz vfr”kh?kz fuxZRk fd;s tkus ds dk;ZA

Carriage of fallowings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

STP 11 mtr Long & PCC 8.5 mtr from E.S.C Bulandshahr to Site

CT/PT unit 10/5A from ESC. BSR to site

Piffer ressitant metering cubicle from ESC. BSR to site with the help of Crane.

TVM 11 KV

Cable 3x70 sqmm 11 KV XLPE with the help of Crane.

Carrage 25/63/100 kva TF

Carriage of All line Material from store to j.e's store at 132/33/11 KV Sub station Bheempur as ACSR Weasel conductor, GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator & Pin Insulator etc.

Erection of Single support including complete 1 I.T. fittings as per RESPO manual and as per direction of Engineer incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of Double Pole support including complete 1 I.T. fittings as per RESPO manual and as per direction of Engineer incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Single support shall be grouted with cement, sand and birck ballast/stone ballast in including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Double pole support shall be grouted with cement, sand and birck ballast/stone ballast in including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of D/P for installation of CT/PT unit & T/F shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Fixing of Stay rod with Stay wire in proper way with Nozelling.

Mounting & Installation 25/63./100 kva T/F on the double Pole

Grouting of Stay rods.

Fixing of erathing rod.

Laying of 3x70 sqmm 11KV XLPE cable putting sand around the cable Fixing of bricks in both sides & top and refilling of trench and its proper ramming including providing necessary loop on both sides.

Laying, sagging. Stringing and binding and jumpering of ACSR weisal, rabbit, dog newly erected poles as per RESPO manual and as per direction of Supervising Engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

Mounting CT/PT unit on D/P with the help of Crane.

Fixing of Cable Box suitable for 3X70 sqmm 11KV XLPE.

Wrapping of Barbed wire

Providing & Fixing Holding Clamps.

Laying and ABC Cable

Providing & Fixing Stay Clamps.

Providing & Fixing Stay Insulator.

Providing Nut & Bolts off-size

Installation & Errection of Piffer ressitant metering cubicle .

Extra Milage charges and carriage from PCC/ST Pole & other material from each 10 Km.

Above work shall be done as per UPPCL/RESPO Rules.

A K ELECTRICAL ENG WORKS (BID ID -4809044)

Vivek Electricals (BID ID -4806644)