CE-MTPSI-SE-ES-CI-OT108-25-26

Charges for Removing, cleaning, transporting, servicing, air leak and operation checking, re fixing and checking of Retractor Assembly of HEA Ignitors and power Cylinders.

Charges for disconnecting the connectors of the flame scanners, removing from the Boiler guide pipe assembly, transporting to work bench, dismantling & Reassembling the scanner head assembly from scanners, removing, cleaning & refixing the lenses, servicing and checking of flame scanners.

Charges for removing, transporting, cleaning and refixing after calibration local pressure gauges/ temperature gauges.

Charges for Removal of Pressure/DP/temperature switches and refixing them after calibration.

Charges for dismantling, transporting, cleaning and refixing them after calibration of Pressure Transmitters and Temperature Transmitters.

Charges for removing from field, transporting to LAB, cleaning, calibrating, and refixing after calibration of air regulator with gauges.

Charges for removing from field, transporting to LAB, cleaning, re fixing after calibration of I/P converter.

Charges for opening and cleaning of 1/2" impulse line and catch pot in mills, Flue gas, primary and secondary air paths.

Charges for releasing of Electroniccards , cleaning of panels & reinserting the cards, terminal tightness checking of FSSS DCS , Feeder, HYDRASTEP, Flame scanner, 110 V AC & 220 V DC distribution panels and CHARGER Panels.

Charges for removing, cleaning, servicing, refixing and checking of SADC positioners.

Charges for Removing the terminal connections, Replacing the broken Terminal Blocks and reconnecting the terminal connections and checking in Various Junction boxes at Boiler and mill area.

Charges for removing, cleaning solenoid valves, air filter cum lubricator & the airlines and replacing the ‘O’ rings in the solenoid valves and refixing the solenoid valves, air filter cum lubricator & the airlines in the HAGs

Charges for cutting and welding of take-off catch pot in mills, flue gas, primary and secondary air path.

Charges for single point cutting and welding of pipe size ½” impulse lines of mills, flue gas, primary and secondary air path including cost of gas, welding electrodes & consumables such as cotton waste, hacksaw blade, etc.

Charges for painting with 2 coats for any electrical equipments.(Ignitors 12 Nos x 0.95 = 11.4 mtr2 and SADC 48 x 0.9 = 43.2 mtr2

Various sizes of U seal (84 Nos.) for Work Sl. no.1. (As per data sheet-1)

Visible light collimator plain lens ( 20Nos.) for Work Sl. no.2

Bellows For Work Sl. no.10 .

Various sizes of ‘O’ rings (60 Nos.) For Work Sl. no.12. (As per Data sheet-2)

F Ring (5 x 9.5x1.3mm) For Work Sl. no.12 .

Various sizes of U seal (12 Nos.) For Work Sl. no.12 . (As per Data sheet-3)

Metallic Paint for Painting of Ignitors 12Nos. :11.4mtr² & SADC 48Nos.:43.2mtr²

Brushes for Painting for work Sl.No.15.

Enamel Thinner for Painting for work Sl.No.15.

Rust Remover (CRC) for work Sl.No.1,2,10 & 11.

Hackshaw Blade for work Sl.No.13,16.

Nada for work Sl.No.10.

2.5 Sq.mm Terminal Blocks

Cost of Consumables such as 2.5 mm welding rod electrode, Dungry cloth,Cotton Waste, Petrol ,Teflon tap, PVC insulation tap & Dentrite (As Data sheet No.05).