Maintenance Work (Surface Dressing, Jungle Cleaning, Drain Cleaning, Painting and Other Miscellaneous Work) for 3 Years of Sector - 31 (Swarn Nagri), Greater Noida

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.

All kinds of soil DSR-13/2.28.1

Cleaning jungle including uprooting of rank vegitation grass bush wood trees and samplings of girth upto 30 cm measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 m out side the periphery of area cleared. SOR-20/259(i)

Same as above 259(i) above but grass only. SOR-20/259(A)

Tractor with trolley including Pol & driver SOR2020/SIN19

Supply of labour. SOR2020/SIN12

Excavation in foundation ordinary soil( Loam,clay or sand) including Lifts upto 1.5m and lead upto 30m and cluding filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surpluse earth as directed by the engineer incharge upto distance of 30 m from the foundation trenchess.SOR-2020/251a

Extra rates For quantities of work executed in or under water and or liquid mud including pumping out water as required. DSR-18/2.24.1

Cartage of ballast, Kankar Coal, grit or sand including loading & unloading but excluding stackings on pakka roads SOR-20/261

IInd Km. and beyond SOR-20/261 (C)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature, jointed with cement mortar 1:3(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints excepts at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as peer direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C kerb stone shall be approved by Engineer-in-charge). DSR-18/16.69

Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost) DAR-2018/16.85

Excavating holes more than 0.10 cum and upto 0.5 cum including getting out the excavated soil then returning the soil as required in layer and not exceeding 20cm in depth including consolidating each deposited layer by ramming watering etc. with disposing of surplus excavated soil as direction with in a lead of 50m and lift upto to 1.5m all kind of soil. DSR/2018/2.30.1

Supply and Fixing R.C.C. Direction board size 200x510x80mm mising 1:1.5:3 including reinforcement all complete for completion of the work as per direction of engineer-in-charge

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work SOR-20/279

As in item 279 above but in proportions of 8:4:1 SOR-20/281

Painting or varnishing with valsper or other approved high grade enamel or super synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISI no. 105/106/133-1950.SOR-647

Painting letters up to 2.5cm, size including supply of all maternals, labours & tools and plants ete required for proper completion of the work SOR 2020/-817

As in item 817 above 8 cm, but up to 15 cm, SOR-20/819

Repainting border line up to 2.5 cm. to 5 cm. wide SOR-2020/837(b)

White washing one coat including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. SOR-20/671

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony rallling, staircase railling and similar works including applying priming coat of approved steel primer. G.I Pipe DSR-2018.10.26.3

Supply and fixing SFRC cover over chamber (with out frame,) 50mm thick. 600X600 mm Heavy duty.

Supply and fixing SFRC cover over chamber (with frame,) 50mm thick. 600X600 mm Heavy duty.

M-150 Brick Work in 1:4 cement & Coarse sand 2.20 F.M. mortar in foundation and plinth including supply of all materiais, labour and T&P etc. requried for proper completion of the work. SOR-20/305a

12 mm cement plaster: 1:6 (1 cement: 6 coarse sand) DSR-18/13.4.2

Supply of ISI market RCC NP-2 pipes of following size including carting loading unloading at godown including all taxes and levies & rubber rings.GNIDA/AR

250 mm.NP-2 dia. RCC Pipes

300 mm.NP-2 dia. RCC Pipes

350 mm.NP-2 dia. RCC Pipes

400 mm.NP-2 dia. RCC Pipes

Providing and laying in position cement concrete 1:4:8 (1cement:4coarse sand:8 graded stone aggregate 40mm nominal size) in concrete cradle under NP-2 pipe of folling diameter including centring shuttering but excluding excavation. Lead upto 2.0 Km. GNIDA/AR

250 mm.NP-2 dia. RCC Pipes

300 mm.NP-2 dia. RCC Pipes

350 mm.NP-2 dia. RCC Pipes

400 mm.NP-2 dia. RCC Pipes

Laying of NP-2 RCC S&S pipes jointed with stiff mixture of cement mortar in the propertion of 1:2 (1Cememt:2Coarse sand) including testing of jointed complete GNIDA/AR

250 mm.NP-2 dia. RCC Pipes

300 mm.NP-2 dia. RCC Pipes

350 mm.NP-2 dia. RCC Pipes

400 mm.NP-2 dia. RCC Pipes

Hiring of Portable Re-cycle jetting cum suction machine mounted on Mahindra volero maxi with hydraulically operate Man-Hole De-silter upto depth of 15 Meter with driver for the area of Gr. Noida. As directed by Engineers in-Charge for 8.50 hours perday overtime will be paid on pro- rate basis, pressure 3000PSI (Min) with 15 mtrs suction head and jetting water capacity of 2000 litres GNIDA/AR

Tractor with Water Tanker with cost of water including P O L SOR-20/Sl.No. 27/Chapter 2

J.C.B with driver including pol Based on SOR-20/Sl.No. 31

Labour Cess and GST will be paid extra as per govt. orders