Development of Jayadev Pitha Kenduli Part-B

CIVIL WORKS

Dismantling brick or stone masonry in cement mortar above 3m height including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all material, labour, conveyance, loading and un-loading, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant.

Ground floor

1st floor

Providing scraping old paints with scrapers, sand papering and washing with soap water or soda including scaffolding, materials labour etc complete as per direction of Engineer-in-charge.

Dismantling grading concrete including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all material, labour, conveyance, loading and un-loading, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant.(1st floor)

Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, sundries, T&P required for the work etc complete as directed by the Engineer-in-charge.

Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.

Supplying all labour, T&P for the Carriage of excavated earth/rabbish by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge.

Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour etc. complete.

Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royality of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge/Architects.

Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royality of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge/Architects.

Brick masonry using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in found. & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

Brick masonry using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

Ground floor

1st floor

R.C.C. work of M-25 having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

Column Base

Ground floor

Column (S/Str.)

Roof Beam

Roof slab

Plinth beam

Lintel

1st floor

Column (S/Str.)

Roof Beam

Roof slab

Lintel

Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)

Ground floor

1st floor

Brick work in superstructure with flyash bricks in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty of all materials, labour, T&P etc. and as per direction of Engineer in charge/Architects.

Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:4) finished smooth to surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.

Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.

Ground floor

1st floor

Providing 16mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.

Ground floor

1st floor

Providing 6mm thick cement plaster with cement mortar of (1:4) with mixing of water proofing compound to RCC surface of roof slabs ceilings , stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge.

Ground floor

1st floor

Providing and applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals Tested to ASTM D4060, ASTM D4541, ASTM D638, ASTM C836. with Adhesion to concrete : >1N/mm2 for waterproofing structures like roof slabs, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the EIC/Architects.

Providing average 40mm thick grading Concrete with (1:2:4) using 12mm & down graded size black hard granite chips mixing of water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance, royality and sundries, T&P etc. complete in all respect as per direction of the Engineer -in-charge/Architects.

Ground floor

1st floor

Providing,fitting & fixing of Glazed vitrified floor tile using premium grade of (make Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness of 8mm to 10mm 1200mmx600mm coloured / printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout required quantities of pigments of approved shades of the vitrified tile required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge/Architects.

Providing,fitting & fixing of Glazed vitrified tile using premium grade of (make Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness of 8mm to 10mm having thickness of 1200mmx600mm coloured / printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge/Architects.

Providing 60cmx60cm size matt finish vitrified floor tiles of approved make ( Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness 6mm to 8mm, approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge/Architects.

Providing 30cmx45cm/ 30cmx60cm size special plain/printed series edge cut ceramic glazed wall tiles of premium grade of approved make ( Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge/Architects.

Providing 20mm thick and above 0.40 Sqm size granite tile flooring in platform, staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.

Ground floor

1st floor

Supplying, fitting and fixing in position granite tiles in dadooes using 20mm thick (above 0.4 Sqm.) of approved quality, colour in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge/Architects.

Ground floor

1st floor

Providing and fixing 18 mm thick gang saw cut, mirror polished

, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete as per specification and direction of Engineer-in-charge/Architects.

Providing & laying 25mm thick Artificial Stone flooring on floors of cement concrete(1:2:4) using 12mm size hard broken granite chips including punning mixed with red oxide pigment with 4mm glass strips etc. incuding all cost of labour, material, conveyance, royalities, loading, unloading, T&P etc. complete in all respects as per direction of the Engineer -in-charge.

GROUND FLOOR

FIRST FLOOR

Providing & laying 25mm thick Artificial Stone flooring on floors of cement concrete(1:2:4) using 12mm size hard broken granite chips including punning mixed with red oxide pigment with 4mm glass strips etc. incuding all cost of labour, material, conveyance, royalities, loading, unloading, T&P etc. complete in all respects as per direction of the Engineer -in-charge.

GROUND FLOOR

VINYL FLOORING :-Providing & installation of Anti-bacterial PVC ANTISTATIC FLOORING of Vinyl Sheet flooring manufactured with a nominal thickness of 2 mm as per ISO 24340-EN 429 and width of 2m as per ISO 24341-EN 426, shall confirm to requirement of ISO 10581-EN 649 and shall have binder content of type II as per ISO 10581 with fire resistance of 8kw/m2 as per ISO 9239-1 and class Bfl-S1 as per EN 13501-1, indentation of less than 03 mm as per ISO 24343-1 and EN 433, Slip resistance of R9 as per DIN 51130,greater than 0.3 as per EN 13893. The static electrical discharge shall be less than 2kV as per EN 1815 .The electrical resistance of the product shall be less than 10^10 ohm as per EN 1081 and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10microgram /m3 and should be 100% reach compliant. The product is fit to be used in class 34 in commercial and class 43 in industrial as per EN ISO 10874 and the product ts to be installed using multi coloured welding rods to ensure seamless finish and the average seam strength shall be more than 240 N/50mm as per EN 684 etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-incharge/Architects.

GROUND FLOOR

SPC FLOORING :-Providing & installation of Anti-bacterial SPC ANTISTATIC FLOORING of SPC AC-6 grade Sheet flooring manufactured with a nominal thickness of 2.5 mm and Wear layer 0.3 mm and size 6 x 36 inch as per ISO 9001-2015 and width of 2.5m m as per ISO 14001-2015, shall confirm to requirement of ISO 45001-2018 and shall have binder content of type II as per ISO 10581 with fire resistance of 8kw/m2 as per ISO 9239-1 and class Bfl-S1 as per EN 16094-1, indentation of less than 03 mm as per ISO 24343-1 and EN 433, Slip resistance of R9 as per DIN 51130,greater than 0.3 as per EN 13893 and Dimensional stability as per ISO -23999. Castor Chair Test as per ISO 4918-25000 Cycle pass. The static electrical discharge shall be less than 2kV as per EN 1815 .The electrical resistance of the product shall be less than 10^10 ohm as per EN 1081 and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10microgram /m3 and should be 100% reach compliant. The product is fit to be used in class 34 in commercial and class 43 in industrial as per EN ISO 10874 and the product ts to be installed using multi coloured welding rods to ensure seamless finish and the average seam strength shall be more than 240 N/50mm as per EN 684 etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-incharge/Architects.

Providing & laying 25mm thick Artificial Stone flooring on floors of cement concrete(1:2:4) using 12mm size hard broken granite chips including punning mixed with red oxide pigment with 4mm glass strips etc. incuding all cost of labour, material, conveyance, royalities, loading, unloading, T&P etc. complete in all respects as per direction of the Engineer -in-charge.

GROUND FLOOR

Providing and fixing factory made 46 mm thick double skin flush pressed steel door of approved size and make made of 0.8/1.0/1.2 mm thick GI Sheet for shutter and 1.2/1.6 mm thick GI sheet for frame with minimum 120 gsm of Zn Coating to provide rust resistance.The Gap between the sheets shall be filled with Honeycomb paper of minimum 150 gsm and provided with stiffeners for tower bolts and Lock (1 No.) etc. as per approved drawing. The outer surfaces shall be finished with Pure Polyster powder coating (Jotun or Equivalent) of thickness not less than 60 Micron complete as per the directions of Engineer-in-charge/Architects.

Supplying,fitting & fixing in position 30mm thick WPC door including fixing of fixtures like 100mm alluminium hinges,handle,tower bolt,stopper including cost of all materials,labour,transportation,loading & unloading etc complete as per specification and direction of Engineering-in-charge/Architects.

Providing and fixing in position WPC frames of size 125mmx50mm to doors fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge/Architects.

Providing & fixing of Fixed window/ventilators/Lovers made of frame 47x50mm mullion 47x68mm both having wall thickness of 19(+/-)0.2mm & single glazing bead of appropriate dimension.(Area upto 0.75 sqm) etc completeas directed by the Engineer-in-charge/Architects.

Supplying, fitting and fixing of M.S window grills ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge/Architects.

Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance of all materials labour T&P etc required for the complete in all respect as directed by the Engineer in charge/Architects.

Providing and painting two coats with synthetic enamel paint over a coat of zinc oxide primer of approved quality and approved shade on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, etc. complete in all respect as directed by Engineer-in-charge.

Ground floor

1st floor

Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials, labour T & P etc complete as per direction of Engineer-in-charge.

Ground floor

1st floor

Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wall smooth including cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.

Ground floor

1st floor

Providing weather coat (Asian paint/Dulux/Berger or equivalent) 2 coats over a coat of primer with cost conveyance & royalties of all materials & cost of all labours T&P required for the work etc. complete in all respect as per the direction of Engineer in charge.

Painting with two coats of texture paint over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by the Engineer-in-charge/Architects.

Providing & laying 25mm thick Artificial Stone flooring on floors of cement concrete(1:2:4) using 12mm size hard broken granite chips including punning mixed with red oxide pigment with 4mm glass strips etc. incuding all cost of labour, material, conveyance, royalities, loading, unloading, T&P etc. complete in all respects as per direction of the Engineer -in-charge.

WIRE CUT BRICK :- Brick masonry work using Exposed Wire cut brick of size( 230x115x80) mm strength not less than 7

5kg/sqcm in cement mortar (1:3) as per the direction of Engineer in charge/Architects.

Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S Urban stone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer including cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by the Engineer-in-charge/Architects.

Ground floor

Providing and painting two coats with synthetic enamel paint over a coat of zinc oxide primer of approved quality and approved shade on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, etc. complete in all respect as directed by Engineer-in-charge.

Ground floor

Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials, labour T & P etc complete as per direction of Engineer-in-charge.

Ground floor

False Ceilling

Providing and fixing in position decorative Gypsum false ceiling made from 12.5mm thick Fire line Gypsum board fixed with main G.I frame channels all along the wall shall be provided. The frame work to be suspended with G.I flats or adjustable M.S rod from intermediate channels using nuts and bolts as recommended using rawls plugs 12.5 mm dia bolts and soft cleat 27mmx 37mmx25mm. Arrangements are to be made to accommodate light fixtures, curtain rails by forming recessed channels which shall be done with jointing compound and paper tape.Ceiling to be leveled and free from cracks. Items to be completed in all respect to the architect's approval. Openings to be made in the ceiling as per architect 's approval to accommodate lighting fixtures. Opening in the ceiling are to be tied with perimeter channel complete with the cost of materials,labour,T&P etc complete as per specification & Direction of EIC/Architects.

ACCOUSTIC GRID CEILING:-Supply and Installation of Anutone 15 mm glass fiber square edge tiles having the technical parameters are as follows : Core - Glassfibre, Fire – Class 1 & P, Acoustics – NRC 0.90,Climate (degree C RH) – 40, 95, Light reflectance 85 %,Green (RC %) – 35, Hygiene (VoC, Clean room) – Low , fully encapsulated for zero erosion of particulate matter from all side fully encapsulated tile of size 595 x 595 x 15 mm having density 120 Kgs/ m3, weight - 1.8 kg/m2 which will be suspended from main ceiling by using 0.4 mm wire thick and the help of T 24 channels whose thickness will be for main T- 24 x 38 x 0.3 x 3600 , cross T - 24 x 25 x 0.3 x 1200 mm , Cross T - 24 x 25 x 0.3 x 600 mm & wall angel of size - 24 x 24 x 0.4 x 3000 mm pre coated metal . The grid system of 600 x 600 mm module shall be maintained for layingAnuton tiles. Now,Anuton Glassfibre square edge tiles of size 595 x 595 x 15 mm thick shall be placed into the grid size of 600 x 600 mm. Ensure arrow marks behind glass fiber square panels are oriented in one direction to achieve uniform looks. Test certificate of the use products shall be submitted after procurement of materials. including cost of all labours, materials, conveyance, fixing & fitting ,loading and unloading, scaffoldings, sundries and T&P etc all complete as per direction of the Engineer -in-charge/Architects.

WOODEN FALSE CEILING WITH LAMINATE :-Providing and fixing of wooden false ceilling with 19 mm bwp PLY frame work and then fixing 6 mm th bwp ply to it over which is finished with 1 mm th SUEDE/TEXTURE laminate & fixed by means of stainless steel sturds & polished with mellamine including all the cost of material & labour , t& p etc complete and as per the direction of EIC / ARCHITECT .

METAL BAFFEL CEILING WITH BAMBOO FINISH :- Supply & Installation of Metal works Baffle (Ceiling) /equivalent - 25*100*3600 in Red Oak/Cherry with 100/125/150 On Centre Spacing with Accessories etc. including cost of all labours, materials, conveyance, fixing & fitting, loading and unloading, scaffoldings, sundries and T&P etc all complete as per direction of the Engineer -in-charge/Architect.

HEXEGONAL/ ANY SHAPE BAFFLE :- Supply & Installation of Soundscapes Shapes of 30 mm thickness & outer dimension 1200x1200 mm with Deck Hanging Kit etc. including cost of all labours, materials, conveyance, fixing & fitting ,loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge/Architect.

GRID CEILING FOR TOILET :- Providing and fixing false ceiling at all height with integral densified ICD bioguard caclium silicate reinforced with fiber and natural filler with bioguard coating false ceiling size 595x595 mm, of approved tecture design and pattern having acoustical NRC 0.50 as per IAS8225.1987, Light reflection 85% minimum non combustible as per BS: 476 (part4) , fire performance as per BS:476 (part 6 &7) , humidity resistant pf 100% thermal conductivity /0.043W/MK as per ASTMS 18:1991 in true horizontal level suspended on interlocking metal T grade of hot dipped galvanized iron section 0.33mm thick galvanized @120mg per sqm. Including both side comprising of main tee runner size 24x38mm of 3mtr , cross tee size 24x32x1.200 and other cross tee 0.600mtr structure . The rate shall be including all cost of materials , labour, overheads T & P etc., complete. as per the detail design and s

pecification approved by Engineer -in-charge /Architect .

Panelling

WOODEN PANELING WITH LAMINATE :- Providing and fixing wooden panelling suitably fixed to the walls with 19 mm thick WPC, ply finished with 1 mm thick texture / suede laminate complete with necessary Hardwood, skirting , mouldings & teak wood beading on the edge etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete. The exposed frame work shall be finished with matt finsish enamel paints / polish with mellamine to match with the shade of the Laminates etc complete as per direction of the Engineer -in-charge/Architects..

ACCOUSTIC PANELLING LOWER PORTION

Supply & installation of wall paneling of high density fiberboard made out of pure pinewood particles , Fire Resistance - Pink in colour core with 5 test Fire Resistance BS 476 part 5 , BS 476 part 6 , BS 476 part 7 ISO 1182 ASTM E662 Smoke Density - Melamine laminated finish, perforated wooden grooved HDF slats L16-2 (2 mm grooves @ 8 mm centers),tongue-groove edge for a seamless look of linear dimension size 128 mm x 2440 mm x 16 mm thick having density 700 Kg /m3, weight -9 Kgs/m2 with back fleecs from soundtex Germany nonwoven acoustic to be pasted on slats surco is to be installed by using GI strut system. The technical parameters are as follows Core Variants - Fiberboard, Climate (OC RH) – 50, 70 Light reflectance – 75%,Green (RC %) – 25, Hygiene (VoC, Clean room) – Low, Class 1,Strength, Load capacity (Kg) - Anti sag, Ball-Impact. The concealed wall paneling system shall include GI Wall channel (WC25) having thickness 0.45mm, length 3600mm, unequal flanges of 15 & 20mm and web of 25mm should be fixed along the perimeter of the wall with nylon sleeves and suitable fasteners at every 300mm center.

Then fixed Main channels (MC45) having thickness 0.9mm, length 3600mm, equal flanges of 15mm and web 45mm from the side wall & fixed at every 1200mm centers with GI cross channel (CC25) having thickness 0.45mm, length 3600mm, knurled web 35mm, depth of 25mm and equal flanges 9.5mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm center. The framework will maintain 50 / 75 mm gap from the walls. Now clad the wooden slats surco on the CC 18 with the help of center & edge clips to get better locking of slats. The tongue & groove are to be properly aligned to get flush look . Synth poly fiber PF 5 x 50 wool of 500 gsm to be filled between the horizontal & vertical studs as in filler with the help of wire / stick & adhesive. Test certificate of the use products shall be submitted after procurement of materials The rate shall be including all cost of materials , labour, overheads T & P etc., complete. excluding GST as per the detail design and specification approved by Engineer -in-charge /Architect .

ACCOUSTIC PANELLING UPPER PORTION

The technical parameters are as follows: core variant - pinewood fibers. Fire class 1 & P Acoustic - NRC 20 mm C10 - 0.75, Climate - OCRH - 50,90 Termite resistance - yes light reflectance - colour dependent, Green RC% - 10 , Hygiene ( Voc ,Clean Room ) - Low , Strength , Load Capacity ( Kg ) - Ball impact .Test certificate of the use products shall be submitted after procurement of materials. The rate shall be including all cost of materials , labour, overheads T & P etc complete as per the detail design and specification approved by Engineer -in-charge /Architect .

INTERIOR BRICK CLADDING :- Supplying and fixing of MCM Modified Clay Material ‐ MCM K Series Bricks of PHOMI or VANJOIN make, sizes of 225x60mm, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.The rate shall be including all cost of materials , labour, overheads T & P etc complete as per the detail design and specification approved by Engineer -in-charge /Architect .

INTERIOR MCM CLADDING:- Supplying and fixing of MCM Modified Clay Material ‐ MCM Stone of PHOMI or VANJOIN make, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— AST

M E84‐ 15.The rate shall be including all cost of materials , labour, overheads T & P etc complete as per the detail design and specification approved by Engineer -in-charge /Architect .

CUSTOMIZE FURNITURE

LOW HEIGHT STORAGE 450 width WITH LAMINATE :- Providing & fixing of LOW HEIGHT STORAGE made out of19 mm thick bwp ply , 6 mm th bwp ply at out side & laminated with 1 .0 mm th sued/TEXTURE laminate on out side & 0.8 mm th laminate at in side , the exposed wooden surface edge binding to match the laminate with central locking, shutters with autoclosing hinges and handles. Including all cost of labour ,T & P etc as per the detail design & specificatio approved by EIC/Architect .

GROUND FLOOR

FULL HEIGHT STORAGE 450 width with glass shutter :-Providin & fixing of FULL HEIGHT STORAGE made out of 19 mm thick bwp ply , 6mm th bwp ply at back side , 8mm th etched glass shutter , 12 mm th edge polished glass selves & laminated with 1 .0 mm th sued/TEXTURE laminate on out side & 0.8 mm th laminate at in side, the exposed wooden surface polished with mellamine or painted with automotive paint with central locking, shutters with autoclosing hinges and handles. Including all cost of labour, T & P etc as per the detail design & specification approved by EIC/Architect .

GROUND FLOOR

PLANTER BOX WITH LAMINATE FINISH :- Providing and fixing of planter made out 19 mm th WPC ply , & finshed with 1mm th LAMINATE at ouert side . All beading & outer surface to be finished with mellamine /pu polish to match the laminate as per the detail design and specifications and inclusive of all cost of labour, hardwares T&P etc complete as per the directions of the EIC/Architect.

GROUND FLOOR

MODULAR FURNITURE

GROUND FLOOR

Supplying,fitting & fixing of GODREJ MAKE RECTA WORK STATION /EQUIVALENT- FULL HEIGHT WITH WORK STATION WITH KBPT AND CPU TROLLY (1200X600) etc complete as per the directions of the EIC/Architect.

Supplying,fitting & fixing of Godrej Make Table - Finnesse Table-5026+ ERU 3616 and Pedestal etc complete as per the directions of the EIC/Architect.

Supplying,fitting & fixing of GODREJ MAKE CHAIR MODEL - BEAT MID BACK etc complete as per the directions of the EIC/Architect.

Supplying,fitting & fixing of GODREJ MAKE READING CHAIR MODEL - PCH-7044T WITH ARM etc complete as per the directions of the EIC/Architect.

Supplying,fitting & fixing of Godrej Make Chair Marvel Visitor etc complete as per the directions of the EIC/Architect.

GROUND FLOOR+1ST FLOOR

Supplying of DUSTBIN:- Material : SS 200, Material thickness = 0.4MM sheet, Diameter: 10 inch, Height: 14 inch (OPEN SOLID DUSTBIN GODREJ OR EQUIVALENT) etc complete as per the directions of the EIC/Architect.

Supply of DUSTBIN FOR ALL LOBBY :-(Nilkamal 10 Liter Twin Dustbin) Nilkamal Twin dustbin comes with two bins for segregation of dry and wet waste. Also, both bins can be removed separately for convenient handling. The bins are easy to clean and maintain. The government is also promoting segregation of waste under ‘Swachh Bharat Mission’. Finish Color -Green/Blue/Black , Primary Material- Plastic SIZE:-Width (cm) 31, Height (cm) 41, Weight (Kg) 1.67, Depth (cm) 30 ( Nilkamal 10 Liter Twin Dustbin OR EQUIVALENT ) etc complete as per the directions of the EIC/Architect.

DECORATIVE ITEM & SINAGES

Providing & supplying of painting & art work made out of acrylic painting on canvas with pvc framing , 5 mm th glass on top & 6 mm ply on back side of the painting as per design approved by EIC/Architect .

Supplying and fixing walldecals/ wallpapers which are smooth / textured/ linear textured & 100% eco friendly , Non woven based . The film type is non woven based & vinyl coated . Overall length is 45.72 metre & overall width is 1220mm , 1524 mm , 610 mm . The product colour is white /offwhite and can be removed with water . Its shading coefficient is 0.93 & substrates are ABS, GlasS, Paint, PMMA , Polycarbonate . Surface finish is matte finish . as per design approved by EIC/Architect .

Providing & fitting fixture of Non Woven Wrapper for Wall & Rigid Part 248 GSM Non woven Material with Water Resistant Coating as per the approved shade and design Including all cost of labour, T & P etc as per the detail design & specifications approved by EIC /Architect.

Providing & fitting fixture of Frosted Film For Glass Brand: 3M Monomeric Calendered, White With Matt Finish, Thickness:- With adhesive: 3.5-4.5 mils (0.09-0.11 mm) Glue: Permanent, Pressure Sensitive Acrylic Glue , With Polycoated Craftpaper based Liner as per the approved shade and design Including all cost of labour , T & P etc as per the detail design & specifications approved by EIC/Architect .

Providing & fitting fixture of Frosted Film For Glass Brand: 3M 3M™ Scotchcal™ Crystal Film Series Cast Premium Calendered, White With Matt Finish, Thickness: With adhesive: 3.5-4.5 mils (0.09-0.11mm) Glue: Permanent, Pressure Sensitive Acrylic Glue, With Polycoated Craftpaper based Liner as per the approved shade and design Including all cost of labour,T & P etc as per the detail design & specifications approved by EIC/Architect .

Providing & supplying ss sinage of size 150mmx150 mm as per the approved shade and design Including all cost of labour , T & P etc as per the detail design & specifications approved by EIC/Architect.

Providing & supplying of sinage made out of lazer cut retro letter on acp with ms frame & all necessary asscories Including all cost of labour , T&P etc as per the detail design & specifications approved by EIC/Architect.

INTERNAL WATER SUPPLY & SANITATION WORKS -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge

50 mm dia

40 mm dia

32 mm dia

25 mm dia

20 mm dia

Supplying all materials, Labour, T & P & fitting and fixing of following different water supply fitting as per ASTMD-2846 with supply of all necessary joint materials etc all complete as per direction of engineer-in-charge .

50mm dia CPVC ball valve

40mm dia CPVC ball valve

32mm dia CPVC ball valve

Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete

15mm to 32mm dia pipe

Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with so

il pipe in cement mortar (1:1) etc all complete as per specification.

Water Closet Complete set -WC (Wall mounted Water Closet- JAQUAR FLS-WHT-5953JPPSM/Equivalent), Single Piece Slim Concealed Cistren with Floor Mounting Frame,installation Kit and S Type Drain Pipe Connection set For wall hung WC (Without Flush control plate) - JAQUAR JCS-WHT- 2400FS /Equivalent , FLUSH PLATE- JAQUAR JCP-CHR- 852415/ Equivalent

Providing and fixing of following size Wash Basin with 175mm Long Wall Connection Pipe including painting of fittings and brackets, cutting and making good the walls wherever required with provision for pillar cock but excluding the cost of pillar cock, including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge.

Under Counter wash basin Complete set ( Under Counter wash basin- JAQUAR -FNS-WHT-407015/ Equivalent) , Bottle trap JAQUAR ALD-769L 300X 190/Equivalant, JAQUAR ALD-CHR-709/Equivalant.

Providing and fixing white vireous china urinal set with Installation Box with Control Cock with 175mm Long wall Connection,including painting of fitting and brackets,cutting and making good the walls and floors wherever required as per the dirctions of Engineer-in-charge Urinal- JAQUAR URINAL WITH FIXING ACCESSORIES SET SIZE (JAQUAR URS-WHT-13257)/ Equivalent Sensor Concealed Type Flushing Valve for Western Commode Complete Set with Provision for Manual Operation Also (Battery Operated) Rs (JAQUAR SNR-STL-51093N /Equivalent ),Bottle trap JAQUAR ALD-769L300X190/Equivalant, , JAQUAR ALD-709/Equivalant, Urinal spreader bowl Top inlet 15mm with fixing stud (Jaquar ALD-1043/Equivalent)

Providing& fixing 8mm thick frosted glass partition for urinal with patch fitting, clams etc including cost of all labour,material, sundries and all chrome hardware fitting etc all complete as per the direction of Engineer-in-charge. ( JAQUAR JSE-CHR-110US450X / Equivalent /Equivalent)

Providing and fixing of Disabled Accessible toilet set consisting of washbasin,EWC ,cistern complete with fittings & seat cover,Grab bar etc,including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge.

Rimless Bowl For Coupled WC with UF Soft Close Seat Cover, Hinges, Fixing Accessories, Size:- 390x610 x800mm- JAQUAR DIS-WHT-93753P180UF ,

Wash basin (JAQUAR DIS-WHT-93801), Bottle trap JAQUAR ALD-769L300X190/Equivalant, JAQUAR ALD -709/ Equivalant.

Grab Bar Vertical swing,white (JAQUAR -WAC-WHT-860800/Equivalent)

Grab Bar 692 mm long,white (JAQUAR -WAC-WHT-BR0600/Equivalent)

Supplying all materials, labour, taxes,T&P for fitting & fixing of different water supply CP, Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,including cost of all labours, materials, conveyance, loading and unloading and royalies, sundries and T&P etc all compete as per direction of the Engineer-in-charge.

Pillar Cock With Long neck with aerator (JAQUAR FLR-5015/Equivalent)-Common

Pillar cock for disabled Toilet ( JAQUAR FLR-5031N/Equivalent )

Twoway Bib cock jaquar FLR-5041N/Equivalent )-Common

Angle Valve (JAQUAR FLR-5053N/Equivalent),-Common

Health Faucet (JAQUAR ALD 573 /Equivalent)

Toilet roll holder with stainless steel Flap (JAQUAR ACN-1153S/ Equivalent )-Common

Soap Dish (JAQUAR ACN-1131N/Equivalent)-common

Soap Dispenser (JAQUAR ACN-1135N/Equivalent)-common

Towel Ring (JAQUAR ACN-1121N/Equivalent)

TOWEL RAIL (JAQUAR ACN-1111SM/Equivalent)

GLASS SHELF (JAQUAR ACN 1171N/Equivalent)

Double coat Hook (JAQUAR ACN 1161N/Equivalent)

Bathroom mirror 600x600 mm

CP Flange small

110mm dia pvc nahani trap without jally

CP extension piece

CP Grating

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expension,(i) Single socketed pipes.

110MM OD P.V.C SWR S/S PIPE(ISI TYPEA)

Supply all material, labour ,T&P ,fitting and fixing UPVC SWR Type B pipes & fitting of approved make conforming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per stanard specification, both below & above ground level/floor & on walls including supply of bobbins,nains, screws, wooden cleant, pipe clamps as per requirement including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips, including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC .

75mm dia OD PVC SWR S/S PIPE (ISI TYPE-B)

110mm dia OD PVC SWR S/S PIPE (ISI TYPE-B)

110mm p.v.c s/j with door

110mm p.v.c swr plain bend 87.5

110mm pipe clip

110mm dia p.v.c vent cowl

110mm dia p.v.c swr coupler

110mm dia p.v.c Y with door

110x110x110 mm dia pvc swr Tee

Supplying and fixing Aquaguard Storage Cooler-Cum-Purifier (80 Ltr. Capacity ) with all cost etc complete as per direction of the EIC/Architect .

Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge.

Supplying all materials,labours,T&P for constructing inspection chamber of 900mmx800mmx450mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm and flyash brickwork in cement mortar (1:4) in foundation and plinth, 100mm thick RCC M25cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials as per the drawing, design and direction of Engineer-in-charge.

Extra for every additional depth of 0.10mtr or part there of inspection chamber as of previous item of size 900x800mm from 450mm to 900mm depth (data for 0.10 mtr per each)

Construction of circular brick masonary manhole chamber of size 0.90 x 0.90 mtr including cement concrete (1:3:6) in bed by using 40mm size granite metal, brickwork in CM (1:4) in foundation & plinth, cement plastering (1:3) over flyash brick, plastering in CM (1:3) with neat cement punning, CC (1:2:4) over bed for benching and channeling, RCC M25 for roof slab of 150mm thick and supply fitting and fixing SFRC medium duty type cover including cost of centring and shuttering cost of MS rod for RCC work, supplying fitting and fixing of the polypropelen step iron of required interval etc all complete with all cost, conveyance, royalties taxes etc all complete as per direction of Engineer-in-charge.

Extra for every additional depth of 0.10mtr or part there of manhole size 9

Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, sundries, T&P required for the work etc complete as directed by the Engineer-in-charge.

Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royality of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge/Architects.

Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royality of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge/Architects.

楴杮眠瑩⁨楶牢瑡牯⁹潲汬牥琠捡楨癥⁥桴⁥敤楳敲⁤敤獮瑩⁹潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭慨杲⽥牁档瑩捥獴‮Ʃ倀潲楶楤杮‬慬楹杮‬灳敲摡湩⁧湡⁤潣灭捡楴杮朠慲敤⁤瑳湯⁥条牧来瑡⁥潴眠瑥洠硩洠捡摡浡猠数楣楦慣楴湯椠据畬楤杮瀠敲業楸杮琠敨洠瑡牥慩楷桴眠瑡牥愠⁴䵏⁃湩洠捥慨楮慣業⁸汰湡ⱴ挠牡楲条⁥景洠硩摥洠瑡牥慩祢琠灩数⁲潴猠瑩ⱥ氠祡湩⁧湩甠楮潦浲氠祡牥⁳楷桴瀠癡牥椠畳扢獡⽥戠獡⁥潣牵敳漠敷汬瀠敲慰敲⁤畳晲捡⁥湡⁤潣灭捡楴杮眠瑩⁨楶牢瑡牯⁹潲汬牥琠捡楨癥⁥桴⁥敤楳敲⁤敤獮瑩⁹獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧䄯捲楨整瑣⹳Ƽ匀灵汰楹杮愠摮氠祡湩⁧景栠慥祶搠瑵⁹慦瑣牯⁹慭敤栠摹慲汵捩污祬瀠敲獳摥愠摮洠捥慨楮慣汬⁹潣灭捡整⁤牰ⵥ慣瑳椠瑮牥潬正湩⁧慰敶獲漠⁦〸浭琠楨正‬潣慲桳灡摥瀠敲慰慲楴湯漠⁦畳⁢慢敳眠瑩⁨〸浭猠湡⁤湡⁤敬敶楬杮氬祡湩⁧景椠瑮牥潬正湩⁧慰敶⁲汢捯楷桴猠湡⁤楢摮湩⁧湡⁤楦慮潣灭捡楴湯眠瑩⁨汰瑡⁥楶牢瑡牯映湩獩楨杮琠敨猠牵慦散椠据畬楤杮挠瑵楴杮漠⁦汢捯獫愠⁴桴⁥摥敧⁳楷桴愠汬氠扡畯⁲湡⁤慭整楲污⁳瑥⁣潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭牨敧봮
牐癯摩湩⁧…楦楸杮䌠獡⁴湩匠瑩⁵敃敭瑮䌠湯牣瑥⁥㉍‰敋扲猠潴敮†⠠潃獭牴捵楴湯漠⁦散敭瑮挠湯牣瑥⁥敫扲眠瑩⁨潴⁰湡⁤潢瑴浯眠摩桴ㄠ㔱愠摮ㄠ㔶洠敲灳捥楴敶祬‬㔳‰浭栠杩⁨湩倠䍃䴠〲朠慲敤漠䍐⁃ㅍ‰牧摡⁥潦湵慤楴湯ㄠ〰洠桴捩Ⱬ映畯摮瑡潩慨楶杮㔠‰浭瀠潲敪瑣潩敢潹摮欠牥⁢瑳湯ⱥ欠牥⁢瑳湯⁥慬摩眠瑩⁨敫扲氠祡湩⁧慭档湩⁥牯洠湡慵汬⁹獡瀠牥搠物捥楴湯漠⁦猠瑩⁥湩挠慨杲⁥楷桴氠扡畯⁲⁔…⁐瑥⁣污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭牨敧ီ义䕔乒䱁圠剉义⹇˅刀捥獥敳⁤楷楲杮琠楬桧⁴潰湩⁴ 楦獲⁴楬桧⁴景朠潲灵挠湯牴汯 慣汬戠汥潰湩⽴攠桸畡瑳映湡瀠楯瑮⼠慷汬映湡瀠楯瑮眠瑩⁨⸱‵煳洮剆卌⁈噐⁃湩畳慬整⁤楳杮敬挠牯⁥畭瑬獩牴湡⁤潣灰牥挠湯畤瑣牯漠⁦卉⁉慭歲摥椠〲洠楤⁡潮⵮敭慴楬⁣噐⁃挠湯畤瑩眠瑩⁨‶流Ɒ㈠〵嘠挠楬⁰湩琠灹⁥睳瑩档䤠䥓洠牡敫⁤湡⁤散汩湩⁧潲敳䤠䥓洠牡敫⁤潭湵整⁤湯䜠䤮洠摯汵牡戠硯眠瑩⁨慦散瀠慬整☠挠癯牥漠⁦畳瑩扡敬猠穩⁥‬眠瑩⁨⸱‵煳洮剆卌⁈噐⁃湩畳慬整⁤楳杮敬挠牯⁥畭瑬獩牴湡⁤潣灰牥挠湯畤瑣牯愠⁳慥瑲⁨楷敲椠据畬楤杮愠汬愠捣獥牯敩⁳湡⁤潣湮捥楴湯愠⁳数⁲楤敲瑣潩景䔠杮湩敥⁲湩䌠慨杲⹥⠠慍敫漠⁦楷敲䘠湩汯硥⼠潐祬慣⽢䄠据潨⁲ 慈敶汬⽳煅 䴨歡⁥景洠摯汵牡戠硯挬癯牥猬楷捴⁨…潳正瑥䰭来慲摮䄠瑲潥⽲捳湨楥敤⁲敚据汥⽯慐慮潳楮⁣楖楳湯䔯⥱䜀佒偕䄭䜀佒偕䈭䜀佒偕䌭Ǟ刀捥獥敳⁤楷楲杮琠敳潣摮牡⁹楬桧⁴潰湩⁴氠潯数⁤牦浯瀠楲慭祲氠杩瑨瀠楯瑮眠瑩⁨⸱猵浱剆卌⁈噐⁃湩畳慬整⁤楳杮敬挠牯⁥畭瑬獩牴湡⁤潣灰牥挠湯畤瑣牯漠⁦卉⁉慭歲摥眠瑩⁨〲浭搠慩渠湯洭瑥污楬⁣噐⁃挠湯畤瑩†楷桴ㄠ㔮煳浭䘠䱒䡓倠䍖椠獮汵瑡摥猠湩汧⁥潣敲洠汵楴瑳慲摮挠灯数⁲潣摮捵潴⁲潦⁲畲湮湩⁧慥瑲⁨湩汣摵湩⁧㌠瀠慬整䤠䥓洠牡敫⁤敃汩湩⁧潲敳眠瑩⁨污捡散獳牯敩⁳…潣湮捥楴湯愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭慨杲⹥⠠慍敫漠⁦楷敲倠汯捹扡 湁档牯⼠䠠癡汥⽳煅 䄠敶慲敧䰠湥瑧㩨㌠†瑭큲
敒散獳摥眠物湩⁧潴挠楥楬杮映湡瀠楯瑮眠瑩⁨⸱‵煳浭䘠䱒䡓倠䍖椠獮汵瑡摥猠湩汧⁥潣敲洠汵楴瑳慲摮挠灯数⁲潣摮捵潴⁲景䤠䥓洠牡敫⁤楷桴㈠洰楤⁡潮⵮敭慴汬捩倠䍖†潣摮極⁴楷桴㘠流⁰㔲嘰䴠摯汵牡匠楷捴ⱨ瑓灥数⁤祴数䴠畯畤慬⁲敒畧慬潴Ⱳ䈠獡⁥…潃敶⁲楷桴ㄠ㔮煳浭䘠䱒䡓倠䍖椠獮汵瑡摥猠湩汧⁥潣敲洠汵楴瑳慲摮挠灯数⁲潣摮捵潴⁲潦⁲畲湮湩⁧慥瑲⁨湩汣摵湩⁧污捡散獳牯敩⁳…潣湮捥楴湯愠⁳数⁲楤敲瑣潩景䔠杮湩敥⁲湩挠慨杲⹥⠠慍敫漠⁦楷敲倠汯捹扡 湁档牯⼠䠠癡汥⽳煅 䜠潲灵挠ȫ刀捥獥敳⁤楷楲杮琠睔湩挠湯牴汯氠杩瑨瀠楯瑮†楷桴ㄠ㔮猠⹱浭䘠䱒䡓倠䍖椠獮汵瑡摥猠湩汧⁥潣敲洠汵楴瑳慲摮挠灯数⁲潣摮捵潴⁲景䤠䥓洠牡敫⁤湩㈠‰浭搠慩渠湯洭瑥污捩倠䍖†潣摮極⁴楷桴㘠流Ɒ㈠〵嘠挠楬⁰湩琠灹⁥眲祡猠楷捴⁨卉⁉慭歲摥愠摮挠楥楬杮爠獯⁥卉⁉慭歲摥洠畯瑮摥漠⹇⁉潭畤慬⁲潢⁸楷桴映捡⁥汰瑡⁥…潣敶⁲景猠極慴汢⁥楳敺Ⱐ†楷桴ㄠ㔮猠⹱浭䘠䱒䡓倠䍖椠獮汵瑡摥猠湩汧⁥潣敲洠汵楴瑳慲摮挠灯数⁲潣摮捵潴⁲獡攠牡桴眠物⁥湩汣摵湩⁧污捡散潳楲獥愠摮挠湯敮瑣潩獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧‮䴨歡⁥景眠物⁥潐祬慣⽢䄠据潨⁲ 慈敶獬 楆潮敬⽸煅 䜠潲灵䌠đ匀灵汰⁹湡⁤楦楸杮漠⁦‵ ‶浡⁰潳正瑥漠瑵敬⁴眠瑩⁨㘠䄠灭‬㔲‰⁖汣灩椠祴数洠摯汵牡猠楷捴⁨卉⁉慭歲摥†潭湵整⁤湯䜠䤮洠畯慬⁲潢⁸楷桴映捡⁥汰瑡⁥…潣敶⁲景猠極慴汢⁥楳敺†湩汣摵湩⁧污捡散潳楲獥愠摮挠湯敮瑣潩湯猠浡⁥睳瑩档戠慯摲愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭慨杲⹥Ț 敒散獳摥眠物湩⁧映牯㔠⼠㘠愠灭猠捯敫⁴畯汴瑥眠瑩⁨′⁸⸱‵煳洮剆卌⁈噐⁃湩畳慬整⁤楳杮敬挠牯⁥畭瑬獩牴湡⁤潣灰牥挠湯畤瑣牯漠⁦卉⁉慭歲摥椠〲洠楤⁡潮⵮敭慴楬⁣噐⁃挠湯畤瑩眠瑩⁨䄶灭‬㔲‰⁖汣灩椠祴数猠楷捴⁨卉⁉慭歲摥†潭湵整⁤湯䜠䤮洠畯慬⁲潢⁸楷桴映捡⁥汰瑡⁥…潣敶⁲景猠極慴汢⁥楳敺Ⱐ†楷桴ㄠ㔮猠⹱浭䘠䱒䡓倠䍖椠獮汵瑡摥猠湩汧⁥潣敲洠汵楴瑳慲摮挠灯数⁲潣摮捵潴⁲獡攠牡桴眠物⁥湩汣摵湩⁧污捡散潳楲獥愠摮挠湯敮瑣潩湯猠灥牡瑡⁥潢牡⁤獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧⠮慍敫漠⁦楷敲倠汯捹扡 湁档牯⼠䠠癡汥⽳䘠湩汯硥⼠煅 Ḡ
畓灰祬愠摮映硩湩⁧景†′⁸‶浡⁰潳正瑥漠瑵敬⁴潣瑮潲汬摥戠⁹†′潮⁳㘠流Ɒ㈠〵嘠挠楬⁰湩琠灹⁥睳瑩档䤠䥓洠牡敫⁤洠畯瑮摥漠楳杮敬䜠䤮洠畯慬⁲潢⁸楷桴映捡⁥汰瑡⁥…潣敶⁲景猠極慴汢⁥楳敺†湩汣摵湩⁧污捡散潳楲獥愠摮挠湯敮瑣潩湯猠灥牡瑡⁥潢牡⁤獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧‮Į匀灵汰⁹湡⁤楦楸杮漠⁦ㄠ⁸‶‫砱㘱愠灭猠捯敫⁴畯汴瑥挠湯牴汯敬⁤祢†ㄠ⁸‶‫砱㘱愠灭†䄶灭‬㔲‰⁖汣灩椠祴数猠楷捴⁨卉⁉慭歲摥†潭湵整⁤湯猠湩汧⁥⹇⁉潭汵牡戠硯眠瑩⁨慦散瀠慬整☠挠癯牥漠⁦畳瑩扡敬猠穩⁥椠据畬楤杮愠汬愠捣獥牯敩⁳湡⁤潣湮捥楴湯漠敳慰慲整戠慯摲愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭慨杲⹥畓灰祬愠摮映硩湩⁧景㘠瀠湩ㄠ‶浡⁰潳正瑥漠瑵敬⁴眠瑩⁨㘱䄠灭‬㔲‰⁖汣灩椠祴数猠楷捴⁨卉⁉慭歲摥†潭湵整⁤湯䜠䤮洠畯慬⁲潢⁸楷桴映捡⁥汰瑡⁥…潣敶⁲景猠極慴汢⁥楳敺†湩汣摵湩⁧污捡散潳楲獥愠摮挠湯敮瑣潩獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧‮Ñ匀灵汰⁹湡⁤楦楸杮漠⁦‶楰㘱愠灭猠捯敫⁴畯汴瑥†卉⁉慭歲摥†潭湵整⁤湯䜠䤮洠畯慬⁲潢⁸楷桴映捡⁥汰瑡⁥…潣敶⁲景猠極慴汢⁥楳敺†湩汣摵湩⁧污捡散潳楲獥愠摮挠湯敮瑣潩獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧‮Ï匀灵汰⁹湡⁤楦楸杮漠⁦㈳愠灭䴠摯汵牡䐠⁐睳瑩档†卉⁉慭歲摥†潭湵整⁤湯䜠䤮洠畯慬⁲潢⁸楷桴映捡⁥汰瑡⁥…潣敶⁲景猠極慴汢⁥楳敺†湩汣摵湩⁧污捡散潳楲獥愠摮挠湯敮瑣潩獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧‮Ɔ刀捥獥敳⁤楷楲杮漠⁦潭畤慬⁲祴数ㄠ〵洰ⱁ㔠⁖祔数䄭唠䉓䌠䅈䝒剅ㄠ⁍楷桴㘠⁁㔲嘰挠楬⁰湩琠灹⁥睳瑩档䤠䥓洠牡敫⁤洠畯瑮摥漠⹇⁉潭汵牡戠硯眠瑩⁨慦散瀠慬整☠挠癯牥漠⁦畳瑩扡敬猠穩ⱥ椠据畬楤杮愠汬愠捣獥牯敩⁳湡⁤潣湮捥楴湯漠硥獩楴杮猠楷捴⁨潢牡⁤獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椠桃牡敧‮⠠慍敫‭捓湨楥敤⁲娨湥散潬 敌牧湡⁤洨特畩⥳⼠慐慮潳楮⁣䔨牵灯⥡䠯癡汥獬䔨畱癩污湥⁴潭敤⥬漠⁲煥極慶敬瑮畓灰祬愠摮映硩湩⁧景䄠䌮 潐敷⁲潳正瑥漠瑵敬⁴眠瑩⁨椠摮獵牴慩祴数猠捯敫⁴畯汴瑥‬瀠畬⁧潴⁰湡⁤敭慴档楡敮⁤潣敶⁲湩猠敨瑥猠整汥攠据潬畳敲‬〲⁁㌯䄲匠⁐䍍⁂椠据畬楤杮愠汬愠捣獥牯敩⁳湡⁤潣湮捥楴湯愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭慨杲⹥팠畓灰祬愠摮映硩湩⁧景吠⁖ 敔敬桰湯⁥潓正瑥漠瑵敬⁴䤠䥓洠牡敫⁤洠畯瑮摥漠⹇⁉潭汵牡戠硯眠瑩⁨慦散瀠慬整☠挠癯牥漠⁦畳瑩扡敬猠穩⁥椠据畬楤杮愠汬愠捣獥牯敩⁳湡⁤潣湮捥楴湯愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭慨杲⹥ἠ
畓灰祬愠摮映硩湩⁧景†″⁸‶浡⁰潳正瑥漠瑵敬⁴潣瑮潲汬摥戠⁹†′潮⁳㘠䄠灭‬㔲‰⁖汣灩椠祴数猠楷捴⁨卉⁉慭歲摥†潭湵整⁤湯猠湩汧⁥⹇⁉潭汵牡戠硯眠瑩⁨慦散瀠慬整☠挠癯牥漠⁦畳瑩扡敬猠穩⁥椠据畬楤杮愠汬愠捣獥牯敩⁳湡⁤潣湮捥楴湯漠敳慰慲整戠慯摲愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭慨杲⹥༠啓䵂䥁⁎䥗䥒䝎ㄮ敒散獡⁳楷楲杮映牯挠物畣瑩猯扵慭湩眠物湩⁧楷桴琠敨映汯潬楷杮洠湥楴湯摥猠穩⁥噐⁃剆卌†湩畳慬整Ɽ挠灯数⁲潣摮捵潴Ⱳ猠湩汧⁥潣敲挠扡敬†䴠歡ⵥ䘠湩汯硥䄯据潨⽲潐祬慣⽢䅈䕖䱌⽓剒䬠䉁䕌†椠爠捥獥敳⁤䵈⁓剆卌倠䍖††潣摮極⁴†景洠湥楴湯摥猠穩⁥慍敫䄭䝋䈯䍅倯敲楣楳湯丯牯慰⽫湁档牯䬯湩慪†獡爠煥極敲⁤獡瀠牥搠物捥楴湯漠⁦湅杧⴮湩䌭慨杲⹥ਠ′潮⁳楳杮敬挠牯⁥⸱‵煳‮浭挠灯数⁲楷敲映牯瀠慨敳愠摮渠略牴污愠摮〠‱潮漠⁦楳杮敬挠牯⁥⸱‵煳‮浭挠灯数⁲楷敲映牯攠牡桴挠湯楴畮祴挠湯畤瑣牯‮湉㈠‰浭搠慩渠湯洠瑥污楬⁣栠慥祶搠瑵⁹†潣摮極⁴䰨䉄琠卌⽂䥌䡇⁔䭃⥔㈨ㅘ㔮ㄫㅘ㔮㼩ࠂ敒散獡⁳楷楲杮映牯挠物畣瑩猯扵慭湩眠物湩⁧楷桴琠敨映汯潬楷杮洠湥楴湯摥猠穩⁥噐⁃剆卌†湩畳慬整Ɽ挠灯数⁲潣摮捵潴Ⱳ猠湩汧⁥潣敲挠扡敬†䴠歡ⵥ䘠湩汯硥䄯据潨⽲潐祬慣⽢䅈䕖䱌⽓剒䬠䉁䕌椠爠捥獥敳⁤䵈⁓剆卌倠䍖††潣摮極⁴†景洠湥楴湯摥猠穩⁥慍敫䄭䝋䈯䍅倯敲楣楳湯丯牯慰⽫湁档牯䬯湩慪†獡爠煥極敲⁤獡瀠牥搠物捥楴湯漠⁦湅杧⴮湩䌭慨杲⹥㈊渠獯猠湩汧⁥潣敲㈠㔮猠⹱洠潣灰牥眠物⁥潦⁲桰獡⁥湡⁤敮瑵慲湡⁤㄰渠景猠湩汧⁥潣敲ㄠ㔮猠⹱洠潣灰牥眠物⁥潦⁲慥瑲⁨潣瑮湩瑵⁹潣摮捵潴⁲湩㈠‰浭搠慩渠湯洠瑥污楬⁣栠慥祶搠瑵⁹潣摮極⹴䈨䉄琠卌⽂䥌䡇⁔䭃⽔䄵倠啌⽇偕⁓佐义⁔ ㈨㉘㔮ㄫㅘ㔮�⠁܀⤂㠀ࠂ删捥慥獳眠物湩⁧潦⁲楣捲極⽴畳浢楡楷楲杮眠瑩⁨桴⁥潦汬睯湩⁧敭瑮潩敮⁤楳敺倠䍖䘠䱒⁓椠獮汵瑡摥‬潣灰牥挠湯畤瑣

Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.

R.C.C. work of M-25 having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

r, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)Q
(v
)Û
( )Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (2X6+1X2.5)O
*P
+u
,Ú
+ ,Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 4 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (4X4+1X2.5)P
(u
)Ú
( )Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 4 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (4X6+1X2.5)P
(u
)Ú
( )Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 4 nos single core 10 sq. mm copper wire for phase and neutral and 01 no of single core 4 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (4X10+1X4)P
(v
)Ù
( ) DISTRIBUTION BOARD<Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions.(With 2 Years Warenty)?Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63Amp / 40Amp FP MCB (10KA) Outgoings-10/16/20A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq) KSupply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door Vertical type powder coated wall mounted 4 way Vertical TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A/63A/80A/100A FP MCCB (25KA) Outgoings-10/16/32A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq) ¯-×?Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door Vertical type powder coated wall mounted 6 way Vertical TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-125A FP MCCB (25KA) Outgoings-10/16/32A SP MCB 10KA-18Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq) ¯-×øSupply and fixing of 5 amp to 32 amp rating 240 V "B"/C series 10KA single pole miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.ÇSupply and fixing of 40 amp DP miniature circuit breaker "C" curve suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.ÈSupply and fixing of 63 amp TPN miniature circuit breaker "C" curve suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.·
Supply, installation,testing & commissioning of Outdoor type floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T , Digital Voltmeter, Digital Ammeter and control fuse etc. complete. MAKE- Legrand / Schneider/Hager/ L&T/SIEMENS/Eq.‡.Ž
Main Panel 400 Amp 4 P MCCB 35 KA -1 No, 250 Amp 4P Changeover - 1 no as incomer, 250 Amp 4P MCCB 25 KA -1 nos,160 Amp 4P MCCB 25 KA -1 no, 125 Amp 4P MCCB 25 KA - 2 nos, 63/80 Amp 4P MCCB 25 KA- 4 Nos, 63/40 Amp 4P MCB 10 KA 2 Nos, , 32 Amp DP MCB 10 KA -2 Nos with copper busbars 4nos of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. 9
Feeder Panel 250 Amp 4 P MCCB 25 KA -1 No, as incomer, 125 Amp 4P MCCB 25 KA - 2 nos, 63/80 Amp 4P MCCB 25 KA- 2 Nos, 63/40 Amp 4P MCB 10 KA 2 Nos, , 32 Amp DP MCB 10 KA -2 Nos with copper busbars 4nos of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. FITTING & FIXTURE
Supply, Installation, Testing and Commissioning of Plastic body Exhaust fan 200 mm sweep 900 rpm with louvers of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj).
Supply, Installation, Testing and Commissioning of Metal body Exhaust fan 380 mm sweep 1400 rpm vheavy duty of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj).w
Supply, Installation, Testing and Commissioning of 1200 mm sweep ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc of approved make with all other required material

s & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/Crompton /Usha/Orient /Bajaj).ISupply, Installation, Testing, and commissioning of decorative Wall fan 300mm sweep,110watt, 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make- Havells/ Crompton /Usha/Orient /Bajaj)/0/JSupply, Installation, Testing, and commissioning of decorative pedestal fan 450mm sweep,120watt, 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make- Havells - V2 Neo/ Crompton /Usha/Orient /Bajaj)¹
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).¹
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 10 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).¢

SITC of 9 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).í(£

SITC of 12 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).î("

SITC of 3 watt LED Ceiling Recessed mounted spot light in different Colour Aesthetically designed lens based of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).m(¢

SITC of 18 watt LED Ceiling Surface mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).í(
Supply, Installation,Testing & commissioning of Striker Single wall light, Chrome with fabric white shade & E27 base of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Phillips 581876/ Havells/ Jaquar/Klite)
Supply, Installation,Testing & commissioning of 7 watt integrated wall light, Chrome finish metal body of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Phillips 581919/ Havells/ Jaquar/Klite/ Bajaj/ CG)
Supply, Installation,Testing & commissioning of 2W Anthracite LED Step/ Foot Light of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 34151/ Jaquar /Havells /Klite /Phillips /CG/Bajaj)
Supply, Installation,Testing & commissioning of 9W LED Integrated wall Light ( Mirror Light) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 581916/ Jaquar /Havells /Klite /Phillips /CG/Bajaj)
Supply, Installation,Testing & commissioning of 12W LED Picture Light Chrome finish of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 31440/ Jaquar /Havells /Klite /Phillips /CG/Bajaj)[
Supply, installation, testing & commissioning of IP 65 LED street Light of 90 W Capacity 6000K Colour temperature with pressure die-cast Aluminium body having in built electronic driver which have 50000 burning hour road way luminaries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.A
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. üSupplying and laying 25 mm x 6 mm Copper earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ¼Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ¶Supplying, storing, laying and commissioning of 50 mm dia HDPE pipe etc as required of approved make complete with all materials & labour as per the direction of Engineer-in-Charge. ¶Supplying, storing, laying and commissioning of 63 mm dia HDPE pipe etc as required of approved make complete with all materials & labour as per the direction of Engineer-in-Charge. CABLE AND CABLE TRAY+
Supplying and installing following size of MS cable trays with powder coating paint of approved colour & with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.31:2-100 mm width X 50 mm depth X 1.6 mm thickness-200 mm width X 50 mm depth X 1.6 mm thickness-300 mm width X 50 mm depth X 1.6 mm thickness'
Supplying and installing following size of perforated MS cable tray bends with powder coating paint of approved colour) & with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.E3K46
Supplying and installation of Ladder type MS cable trays with synthetic enamelpaint of approved colour & with convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. (Design to be approved by Engineer in charge)23943
Supplying, storing, laying, testing and commissioning of 3 c x 6 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. 4
Supplying, storing, laying, testing and commissioning of 4 c x 10 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench

Roof slab

Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)

Providing 6mm thick cement plaster with cement mortar of (1:4) with mixing of water proofing compound to RCC surface of roof slabs ceilings , stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge.

of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. 4
Supplying, storing, laying, testing and commissioning of 4 c x 16 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. 6
Supplying, storing, laying, testing and commissioning of 3.5 c x 50 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. 6
Supplying, storing, laying, testing and commissioning of 3.5 c x 70 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. CORRIDOR ELECTRICAL WORK L
Supplying, installation and commissioning of 12 W LED Verbena Square Bollard light 1000 mm long. Body : Square Aluminium Tube,Mounting : Surface - Floor Finish : Powder coated etc complete with connection as required for the work and as per direction of Engineer-in-Charge.(Make: K- Lite KL-4735/Havells / BAJAJ/ CG/ Jaquar). ½Supply, installation, testing & commissioning of 3050 mm long decorative lighting pole with mild steel body step pole with grey/black powder coting fnish. The control gear tray made up off diecast alluminium body & prewired with 2.5 sqmm copper cable, 6 Amp SP MCB, 32 Amp 4 pole connector, 5 Amp 3 way terminal connector & earthing point. The Pole shall have base Plate of size (200x12) mm with provision for founation bolt fittings.Compatible for all suitable size for cable entry & exist as required of approved make with all materials & labour as per the direction of Engineer-in-Charge.(Make: K- Lite Flat Series KP-4786/ Havells / BAJAJ/CG/Jaquar). zSupply, installation, testing & commissioning of coil earthing etc as required as per the direction of Engineer-in-Charge.º
Supply, installation, testing & commissioning of 30 watt LED post top light fittings integrated with LED Modules, Clear Polycarbonate optical cover, Protection class IP 65, Integral power supply, Earth connection, BIS Mark as required of approved make etc complete with all materials & labour as per the direction of Engineer-in-Charge. (Make: K -lite Avira KL- 4976/ Havells / BAJAJ/CG/Jaquar). á
Supply, Installation, testing & commissioning 4 X 20W LED Track light with 2meter track having die-cast aluminium housing and coated with zinc rich primer & pure polyester powder coating of Jet Black Finish. CCT-3000K/4000K, CRI-e"70, IP-20, SDCMd" 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%, Optical Distribution :120degree. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: K -lite Proxima KL-23678 /Jaquar/ Phillips/ Havells).ó
Supply, Installation, testing & commissioning 12W LED F

甀猀 氀椀最栀琀 栀愀瘀椀渀最 搀椀攀ⴀ挀愀猀琀 愀氀甀洀椀渀椀甀洀 栀漀甀猀椀渀最 愀渀搀 挀漀愀琀攀搀 眀椀琀栀 稀椀渀挀 爀椀挀栀 瀀爀椀洀攀爀 ☀ 瀀甀爀攀 瀀漀氀礀攀猀琀攀爀 瀀漀眀搀攀爀 挀漀愀琀椀渀最 漀昀

Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, sundries, T&P required for the work etc complete as directed by the Engineer-in-charge.

Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royality of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge/Architects.

Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royality of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge/Architects.

Brick masonry using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in found. & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

et Black Finish, UV Stabilized Clear toughened glass diffuser. CCT-3000K, CRI-e"70, IP-65, IK-06, SDCMd" 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%, Optical Distribution :120degree. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as requiredof approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make: K -lite Nebula KL-24268 /Jaquar/ Phillips/ Havells).
Supply, installation, testing & commissioning of 10 watt LED 2 Way Wall light fittings integrated with LED Modules, Protection class IP 65, Integral power supply, Earth connection, BIS Mark as required of approved make etc complete with all materials & labour as per the direction of Engineer-in-Charge. (Make: Phillips - 31450 /K -lite / Havells / BAJAJ/CG/Jaquar). 3
Supplying, storing, laying, testing and commissioning of 3 c x 4 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Fitting and Accessories- FaçadeL

Supply inspection testing & Commissioning High Quality LED Spot Light Power : 10W,CCT : 3000K, Beam Angle : 15°/30°,Input Voltage: 100-240V AC, Body : Die cast Aluminium, IP66 including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing.(Make-Canara / LT /Jaquar/Leksa/Halonix/Philips) 
3%

Supply inspection testing & Commissioning of High Quality LED Strip Light,Power : 15W/m, CCT : 3000K, Input Voltage : 24V DC, IP66 including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing., (Make-Canara / LT, /Jaquar /Leksa/ Halonix/ Philips) ï3ï
Supply inspection testing & Commissioning of Aluminum Extrusion/clip for LED Strip including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing. (Make-Canara / LT /Jaquar/Leksa/Halonix/Philips) ½3

Supply inspection testing & Commissioning of High Quality LED Driver Power : 200W, Input Voltage : 100-240V AC, Output Voltage : DC 24V IP65 including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing., (Reputed Make) ù3Ô
Supply inspection testing & Commissioning of Waterproof Power Connectors for Light Fixture including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing. (Reputed Make) Å3Â
Supply inspection testing & Commissioning of IP66 plain junction Boxes including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing. (Reputed Make) ²3Lightning ArrestorÎProviding and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including h

R.C.C. work of M-25 having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

Roof slab

Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)

oles etc. complete as required.¯Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.“Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) ‘Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run) ±Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.`Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.bS/F 50 mm dia Light duty GI pipe, 3 mtr long in ground for protection of GI conductor etc as reqd.SAFETY EQUIPMENTSSupply and installation of Rubber Mats 12mm thick of size 2000 mm x 1000mm x 12 mm thick Electrical tested with test certificate.£Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.“Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.0Data Networking,WIFI,CCTV,IP-PBX System Wiringâ
Supply and laying of Cat6 4-pair 23AWG UTP Cable in the existing ISI marked PVC conduits for data and voice,CCTV & access Control including the cost of labor & material T & P as required as EIC.(Make: Tyco/ Legrand/ Digisol)Ä3X

Supply, installation and commissioning of RJ-45Jack of Category 6 with Single-port British-style Face plate 86x86 mm with Curveture and Wall Mout Box l(G.I/PVC) , to be fixed in concealed manner in partition/wall by necessary bolts & nuts including the cost of labor & material T & P as required as EIC.( Make: Tyco/ Legrand/ Digisol) 1
3Fire Detection System-:kSupply, Installation, Testing and Commissioning of Intelligent Addressable Fire Detection and Alarm System CONTROL EQUIPMENTS:c32 bit microprocessor based Intelligent Addressable Fire Alarm Control panel with 2 Loops with battery back up. The panel would be modular, decentralized, with The panel shall be consisting with minimum 320 character LCD display and for networking. The Panel would be able to record atleast 60,000 events history. Each loop would be capable to have (minimu 240 Devices) atleast 126/99 addressable detectors and addressable devices with up to 2.0 km loop length, . with 12V battery back up for 30 Minutes and battery charger in built . Make: Siemens/Honeywell (Notifier)/ or Similar Superior (UL/EN approved)Q5R2S5Z2¾
5Ò
259DETECTORS & OTHER MODULES (MAKE - ATEIS/Honeywel/Siemens)d
Supplying and fixing Intelligent Addressable type photo thermal detector with base for use smoke or combined both with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd.Including all materials,labour,taxes (excluding GST) etc as required as per direction of EIC.21H4%
Supplying and fixing Intelligent Addressable type HEAT detector with base for use as heat with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong, materials, labour, taxes etc as required as per direction of EIC.21@4¸Sypplying and fixing Intelligent Addressable Manual Call Point i/c testing and commissiong etc as reqd.Including all materials, labour, taxes etc as required as per direction of EIC.-1>4ù S/F Addressable Loop sounder with strobe interface module, power supply for sounder and programmable by software having operating temperature -10p C to + 55p C etc as reqd.Including all materials,labour,taxes etc as required as per direction of EIC.14>
S/F Analogue Addressable Control module with IP66 casing containing two relay outputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C. Including all materials,labour,taxes etc as required as per direction of EIC.1'4=
S/F Analogue Addressable Monitor module with IP66 casing containing four relay inputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C. Including all materials,labour,taxes etc as required as per direction of EIC.1'4LS/F Addressable phone control module with IP66 casing etc complete as reqd.9S/F fire fighter telephone handset etc complete as reqd.2S/F fire fighter phone jack etc complete as reqd.vS/F Duel LED Response Indicator (LOCAL).Including all materials,labour,taxes etc as required as per direction of EIC.CABLE & WIRING ACCESSORIES£S/F 3"/3" JB for mounting of detectors & other accessories with necessary fittings.Including all materials, labour, taxes etc as required as per direction of EIC.æSupplying and fixing Outdoor Electronic Sounder with 4 distinct tone including 40W Speaker with required accessories as reqd.Including all materials,labour,taxes etc as required as per direction of EIC. ûSupplying & Laying of 2x1.5 sq.mm. ISI marked copper armourd conductor cable with gland scoket and other wiring accessories on the existing surface/tray/shaft etc as reqd.Including all materials,labour,taxes etc as required as per direction of EIC.AIRCONDITIONING SYSTEM ½Supply of Full Inverter VRF System with Modular type outdoor units (Top Discharge) , all scroll DC Inverter compressors for Cooling applications along with different types of indoors compitable with VRF ODUs with R 410 A . All inverter capacity controlling compressors shall be suitable for 3 Phase, 50 Hz.. The outdoor fins should be with corrosion resistant chemical coating at factory only alongwith hydrophilic coating to shield it from Salt, Sand & other elements brought in by the air. The manufacturer must be OEM of its compressor, which is fitted in the VRF outdoor unit. It can work upto 53 Degree Celsius. All proposed outdoor unit should have minimum COP of 3.4 at 100% load condition for Cooling in standard AHRI test conditions (Ambient DBT-35 Deg C, Inside DBT 27 Def C/WBT 19 Deg C). Proposed outddor unit system should not have any deration in cooling capacity upto 39 Degree C ambient temepetrure . Make LG, Mitsubishi Electric, HitachiCapacity: 12 HPCapacity: 14 HPODU Kit×SITC of The Indoor units suitable for operation on 220V-240V, Single Phase, 50 Hz AC electric supply and shall have shall have electronic control valves to control refrigerant flow with washable Filters,BLDC motors.8.0 TR Ductable UnitIR Sensor for DuctableSupply of Y-BranchesÊ
Supply of ceiling mounted Inverter Type Cassette Air Conditioner with R410 -A Refrigerant Gas 4 ways ,fan motor should be BLDC,comprosser should be Twin Rotary and machine can work in a single phase main power supply to the Out Door Unit .Capable of operation up to 53 deg ambient temperature.Sound level should be a minimum of 44 dB(A). Out door unit fins should be corrosion resistance apart from hydrophilic coating.Make- LG,Mitsubishi Electric, Hitachi4.0 TRANCILLARY ITEM<Installation, Testing & commissioning of VRF Out Door units.:Installation, Testing & commissioning of VRF Indoor units.4.0 TR - 4Way Cassette AC”SITC of the Cu. refrigerant pipes with 19mm/13mm with nitrile rubber tube insulation of following sizes Make: Nippon/ Ravi Tubes/ Mandev/ Total Line#Gas line with 19mm thick insulation34.9mm28.58mm22.2mm&Liquid line with 13mm thick insulation19.05mm15.88mm12.7mm9.52mmšSITC of the Cu. refrigerant pipes with nitrile rubber tube insula

tion of following sizes Make: Nippon/ Ravi Tubes/ Mandev/ Total Line - For Cassette UnitControl & Transmission WiringÁSupply Installation Testing and Commission of Control wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor and outdoor units. Make: Polycab/ Havells/ Anchor/ RR Cabel/ FinolexÊSupply Installation Testing and Commission of Control wiring of 4 core x 1.5 sqmm copper in suitable conduits between Cassette indoor and outdoor units. Make: Polycab/ Havells/ Anchor/ RR Cabel/ FinolexˆSupply Installation Testing and Commission of PVC drain pipe with 6mm thick nytrile tube insulation.Make: Supreme/ Finolex or equivalent32mm40mmQCommissioning of VRV systems including topping R410A gas as per site requirementsáDesign, supply, fabrication & erection of air distribution Factory Febricated Oval GSS Spiral Ducting in accordance with the approved ducting lay out drawing, complete with all accessories, dampers, guide vanes, support, etc.;1]6 24 G GP Sheet 22 G GP SheetiProviding insulation over the ducts with 13 mm thick Nitrile rubber Insulation fix with proper adhesive.‹Dynacraft/Systemair/carry air or equivalent make linear grills or extruded aluminium section finished with power coated or approved colour.Diffuser with DamperGrillŸSupply & Installation of Galvanised Steel Slotted Tray for copper piping for the safety of nytrile insulations over copper pipe. ( For the exposed Area only)50mmx300mm X 50mmÀFabrication of supports with MS Angle, C-channels, I-section, Additional supports etc. with two coats of the red oxide paint and two coats of finished colour as per site instruction. NLifting , Shifting of Indoor Unit from Transporter to Terrace and Scarpfolding AUDIO SYSTEM 
Supply, installation, testing, and commissioning Of 10" or better Outdoor Coaxial Speaker - IP64, Freq or better . Response (-3 dB) : 67 Hz - 20 kHz, Freq or better . Range (-10 dB) : 55 Hz - 20 kHz or better , Rated Power : 450W, 1800W Peak or better , H Dispersion : 100º or better , V Dispersion : 100º or better , Crossover : Passive, 1.2 kHz or better . Nominal Impedance : 8 ©, Transformer Taps : 100/70 Taps : 15W / 30W/ 40W or better , Max Output : Cont 122 dB or better , Peak 128 dB,LF : 10" High Power Coaxial Driver, 400W AES, 1600W Peak or better , 2" Copper Voice Coil - Ferrite Magnet,Environmental . Resistance Coating, Onyx Terra-Coating for enhanced resistance ,against environmental factors, Large Effective Piston Area, placed in a volume optimised enclosure for enhanced bass response, HF : 1" Voice Coil - Ferrite, 50W AES, 200W Peak or better of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Makes :Bose/Mayer Sound/Quest/D&B/LAcoustics) ü
Supply, installation, testing, and commissioning of 2 X 350W Constant Voltage Compatible Installation Amplifier, 2 Output Channels, 250W/ Ch @ 8©, 350W / Ch @ 4©, 350W / Ch @ 2.7©, 700W / Ch @ 8©ÀÛÜ Bridged, 1000W / Ch @ 4©ÀÛÜBridged,AMPLIFIER INPUTS 2 x Analogue Inputs,AMPLIFIER OUTPUT, 2 Link Outputs, 2 Power Outputs,CONNECTORS, XLR Connectors for Signal Input and Link,Output Speak-on and Binding Post Connectors for,Channel Outputs,SYSTEM SPECIFICATIONS, Input CMRR > 60 dB, Freq. resp.: 20Hz - 20kHz ±dB, THD : better than 0.18% (1 kHz), THD : better than 0.2% (FR) Nominal system gain: 32 dB, Input Impedance  20k©, >300 Damping Factor, 1kHz, 8ÀÛÜ©, Signal Limiters Present, Protection Against Short Cicrcuit & DC,Outputs Peak Limiting, Input Load Protection,CONTROLS &MONITORING, LED Strip for Output Metering, Rotary Knobs for Channel Volume,POWER CONSUMPTION, 5A Power Consumption, Nominal @ 240V,4 Ohms,10.4A Power Consumption, Nominal @120V, 4 Ohms, See Power Consumption & Thermal,Emission Chart for a Detailed specification,OPERATING PARAMETERS,Operating positions : To be used in arack-mount case with no front to back airflowrestriction. Maximum permitted ambient temperature (Ta max) 45° C (113° F) Minimum permitted ambient temperature,(Ta min): 0° C (32° F) 32 dB Fan Noise,AESTHETIC SPECIFICATIONS, White Aluminum Chassis, Matte Star Silver Front Pane of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Makes :Bose/Mayer Sound/Quest/D&B/LAcoustics )0Supply, installation, testing, and commissioning Of 10 Channel Compact Analo

湩⁧牆浡⁥楷桴䘠ⱘ畎扭牥漠⁦湉異⁴桃湡敮獬㠠䴠湯‫′瑓牥潥䌠慨湮汥ⱳ䴠摥慩倠慬敹⁲楷桴唠䉓⼠䈠⁔湩異ⱴ畎扭牥漠⁦畏灴瑵䌠慨湮汥⁳䴬獡整⁲⭌⁒䱘⁒畏灴瑵‬敒潣摲湩⁧畏⁴㈨牔捡⥫‬剔⁓畁ⱸ䴠湯⵩Ⱳ䘠⁘畍整☠䠠慥灤潨敮传瑵異獴伬楬敶⁲塆匠湩汧⁥塆䔠杮湩ⱥ敒潣摲湩⁧ⴲ牔捡敒潣摲湩⁧湉伯瑵䄬硵獥ㄠ䘬敲畱湥祣删獥潰獮⁥〲穈ⴠ㌠䬰穈〠㔮䉤䔬据潬畳敲删杵敧⁤䉁⁓潈獵湩Ⱨ䤠⁐㌴䴠硡‮湉異⁴敌敶楍⁣㈫搴畂‬楌敮⬠㐲䉤Ⱶ传桴牥⬠〲䉤Ⱶ慆敤獲䌠牡潢慆敤獲‬䉁⁓潔獰䴠硡‮畏灴瑵䰠癥汥堠剌⬠㘲䉤Ⱶ吠卒⬠〲䉤⁵䴬硡䤠灮瑵倠睯牥㐠‰慗瑴ⱳ潍湵楴杮匠獹整敄歳潴⁰敄楶散⁳楷桴䄠瑮⵩歓摩删扵敢⁲敆瑥漠⁦灡牰癯摥洠歡⁥潣灭敬整眠瑩⁨污慭整楲污⁳…慬潢牵愠⁳敲畱物摥愠⁳数⁲桴⁥楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥⠠潂敳䴯祡牥匠畯摮 畑獥⽴䐠䈦 䅌潣獵楴獣⤠͝匁甀瀀瀀氀礀Ⰰ 椀渀猀琀愀氀氀愀琀椀漀渀Ⰰ 琀攀猀琀椀渀最Ⰰ 愀渀搀 挀漀洀洀椀猀猀椀漀渀椀渀最 伀昀 㐀ⴀ䤀一 㠀ⴀ伀唀吀 漀爀 戀攀琀琀攀爀 䰀漀甀搀猀瀀攀愀欀攀爀 倀爀漀挀攀猀猀漀爀Ⰰ 䴀愀琀爀椀砀 ☀ 䌀漀渀琀爀漀氀氀攀爀Ⰰ㐀 䄀渀愀氀漀最甀攀 䤀渀瀀甀琀猀Ⰰ 㠀 䄀渀愀氀漀最甀攀 伀甀琀瀀甀琀猀Ⰰ 㤀㘀 欀䠀稀 漀爀 戀攀琀琀攀爀 䐀匀倀 漀渀 愀氀氀 挀栀愀渀渀攀氀猀Ⰰ 刀匀 ☀ 唀匀䈀 㐀㠀㔀 一攀琀眀漀爀欀 䌀漀渀琀爀漀氀Ⰰ䤀洀瀀攀搀愀渀挀攀 㸀

10k Ω, CMRR > 60 dB (50 Hz-10kHz) or better , Minimum load : 600Ω, Sample rate : 96kHz, Freq. Response : 10 Hz - 40 kHz or better , Dynamic range > 116dB (20 Hz - 20 kHz) or better , THD : < 0.004% (20 Hz - 20 kHz) or better ,4 XLR Inputs & 8 XLR Outputs, RS 485 (ETH/Euroblock) Control Input, USB Type-B Control Input,85-230 VAC or better , 50Hz -60 Hz or better , 1A Power Consumption, Nominal @ 240V,4 Ohms, 2A Power Consumption, Nominal @ 120V, 4Ohms or better of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Bose/Mayer Sound/Quest/D&B/LAcoustics)υ匁甀瀀瀀氀礀Ⰰ 椀渀猀琀愀氀氀愀琀椀漀渀Ⰰ 琀攀猀琀椀渀最Ⰰ 愀渀搀 挀漀洀洀椀猀猀椀漀渀椀渀最 伀昀 圀椀爀攀氀攀猀猀 䠀愀渀搀栀攀氀搀 䴀椀挀爀漀瀀栀漀渀攀 ☀ 吀爀愀渀猀洀椀琀琀攀爀 ☀ 愀猀猀漀挀椀愀琀攀搀 刀攀挀攀椀瘀攀爀 眀椀琀栀 琀栀攀 戀攀氀漀眀 猀瀀攀挀椀昀椀挀愀琀椀漀渀猀㨀ⴀ 䠀愀渀搀栀攀氀搀 吀爀愀渀猀洀椀琀琀攀爀㨀 䘀爀攀焀甀攀渀挀礀 刀愀渀最攀㨀 㔀㔀 䠀稀 ⴀ ㈀ 欀䠀稀 漀爀 戀攀琀琀攀爀 Ⰰ 刀䘀 刀愀渀最攀㨀 ㄀ 洀 漀爀 戀攀琀琀攀爀 Ⰰ 䰀椀渀攀 漀昀 匀椀最栀琀Ⰰ 刀䘀 伀甀琀瀀甀琀㨀 䴀愀砀⸀ ㌀ 洀圀 漀爀 戀攀琀琀攀爀 Ⰰ 䘀爀攀焀甀攀渀挀礀 䈀愀渀搀猀㨀 䌀㨀 㜀㌀㐀 ⴀ 㜀㜀㘀 䴀䠀稀 漀爀 戀攀琀琀攀爀 㬀 䜀䈀㨀 㘀 㘀 ጀ†㘀㐀㠀 䴀䠀稀㬀 䔀㨀 㠀㈀㌀ ጀ†㠀㘀㔀 䴀䠀稀㬀 䐀㨀 㜀㠀 ⴀ 㠀㈀㈀ 䴀䠀稀Ⰰ 倀漀眀攀爀 匀甀瀀瀀氀礀㨀 ㈀ 䄀䄀 戀愀琀琀攀爀椀攀猀Ⰰ ㄀⸀㔀 嘀Ⰰ 伀瀀攀爀愀琀椀漀渀 吀椀洀攀㨀 㠀 䠀漀甀爀猀Ⰰ 吀礀瀀攀㨀 䐀礀渀愀洀椀挀 漀爀 戀攀琀琀攀爀⸀刀攀挀攀椀瘀攀爀㨀 伀瀀攀爀愀琀椀渀最 䌀栀愀渀渀攀氀猀㨀 ㄀㘀 漀爀 戀攀琀琀攀爀 䌀栀愀渀渀攀氀猀 匀椀洀甀氀琀愀渀攀漀甀猀 唀猀攀Ⰰ 䘀爀攀焀甀攀渀挀礀 匀攀氀攀挀琀椀漀渀㨀 䄀甀琀漀 匀攀氀攀挀琀椀漀渀 眀椀琀栀 䤀刀 匀礀渀挀Ⰰ 䘀爀攀焀甀攀渀挀礀 䈀愀渀搀猀㨀 䌀㨀 㜀㌀㐀 ⴀ 㜀㜀㘀 䴀䠀稀㬀 䜀䈀㨀 㘀 㘀 ጀ†㘀㐀㠀 䴀䠀稀㬀 䔀㨀 㠀㈀㌀ ጀ†㠀㘀㔀 䴀䠀稀㬀 䐀㨀 㜀㠀 ⴀ 㠀㈀㈀ 䴀䠀稀Ⰰ 䘀爀攀焀甀攀渀挀礀 刀愀渀最攀㨀 ㈀ 䠀稀 ⴀ ㈀ 欀䠀稀Ⰰ 倀漀眀攀爀 匀甀瀀瀀氀礀㨀 䐀䌀㄀㈀嘀ⴀ㄀㠀嘀 ⼀ 㔀 洀䄀 漀爀 戀攀琀琀攀爀 Ⰰ 䴀漀搀甀氀愀琀椀漀渀㨀 圀椀搀攀戀愀渀搀 䘀䴀Ⰰ 䐀椀瘀攀爀猀椀琀礀 倀爀椀渀挀椀瀀氀攀漀昀 愀瀀瀀爀漀瘀攀搀 洀愀欀攀 挀漀洀瀀氀攀琀攀 眀椀琀栀 愀氀氀 洀愀琀攀爀椀愀氀猀 ☀ 氀愀戀漀甀爀 愀猀 爀攀焀甀椀爀攀搀 愀猀 瀀攀爀 琀栀攀 搀椀爀攀挀琀椀漀渀 漀昀 䔀渀最椀渀攀攀爀ⴀ椀渀ⴀ䌀栀愀爀最攀⸀ ⠀吀攀氀瘀椀挀⼀ 䈀攀礀攀爀搀礀渀愀洀椀挀⼀匀栀甀爀攀⼀ 䈀漀猀挀栀 ⤀쨀āSupply, installation, testing, and commissioning Of Outstanding vividness with 22.05 cm (8.7”) LCD display, 60 Hz Refresh Rate, 800 x 1340 (WQXGA) MediaTek Helio | G99 Processor 8 MP AF Rear Camera, 2 MP FF Front camera,Dual Speakers Dolby Atmos 5100 mAh Battery, Physical SIM (nano),RAM 4 GB, ROM 64 GB Expandable, Wi-Fi+4G of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( SAMSUNG/LENOVO/IPAD)̬匀灵汰ⱹ椠獮慴汬瑡潩Ɱ琠獥楴杮‬湡⁤潣浭獩楳湯湩⁧晏†慈摮⁹效摡桰湯⁥流汰晩敩⁲䈬瑡整祲倭睯牥摥䠠慥灤潨敮䄠灭楬楦牥眠瑩⁨潖畬敭☠䴠瑵⁥畆据楴湯ⱳ映牯倠摯慣瑳湩Ⱨ䴠獵捩‬牐摯捵楴湯‬湡⁤潍敲倠牯慴汢ⱥ猠整敲敨摡桰湯⁥浡汰晩敩⁲敤楳湧摥映牯搠浥湡楤杮愠摮挠楲楴慣畡楤潭楮潴楲杮㐠椠摮灥湥敤瑮㌠㔮洠敨摡桰湯⁥畯灴瑵ⱳ攠捡⁨楷桴愠搠摥捩瑡摥瘠汯浵⁥潣瑮潲湫扯䤠摮灥湥敤瑮洠瑵⁥畢瑴湯⁳潦⁲慥档挠慨湮汥瀠潲楶敤⁳桴⁥扡汩瑩⁹潴洠瑵⁥慥档漠瑵異⁴档湡敮浩敭楤瑡汥⁹楷桴畯⁴晡敦瑣湩⁧癯牥污畯灴瑵猠瑥楴杮⁳楈桧瘠牥慳楴楬祴漠⁦桴⁥睴ⵯ慷⁹潰敷⁲祳瑳浥‮潐敷敲⁤祢攠瑩敨⁲睴䅁戠瑡整楲獥漠⁲桴⁥单⁂祔数䌭挠湯敮瑣牯映潲单⁂䍁愠慤瑰牥唬䉓戠瑡整祲瀠捡Ⱬ漠⁲潣灭瑵牥唠䉓瀠牯⁴景愠灰潲敶⁤慭敫挠浯汰瑥⁥楷桴愠汬洠瑡牥慩獬☠氠扡畯⁲獡爠煥極敲⁤獡瀠牥琠敨搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧‮ 敔癬捩 敂桲湩敧⽲匠畨敲ⰩĂSupply, installation, testing, and commissioning Of Wired Over Ear Headphones Without mic.Closed, around-ear headphone design to reduce ambient noise proprietary transducers deliver an outstanding stereo sound reproduction with powerful punchy bass The soft ear cushions and the ergonomic design provide enhanced fit and comfort A robust and 2.0m singled-sided cable 6.3 mm (1/4”) stereo jack adaptor included of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Telvic/ Beyerdynamic/Shure/Bosch)Ɛ匀灵汰ⱹ椠獮慴汬瑡潩Ɱ琠獥楴杮‬湡⁤潣浭獩楳湯湩⁧晏†⸱‵煓浭砠㈠䌠牯⁥呁⁃潃灰牥䌠湯畤瑣牯匠牴湡敤Ɽ䌠牯⁥睔獩整⁤湩䌠物畣慬⁲潆Ⱳ䌠汯畯⁲潃敤⁤求敵⼠眠楨整漠瑵牥䨠捡敫整⁤楷桴䴠瑡⁴楦楮桳匠灵牥映敬楸汢⁥灓捥慩噐⁃楷桴匠煥敵瑮慩慍歲湩⁧湯䔠敶祲洠瑥牥景愠灰潲敶⁤慭敫挠浯汰瑥⁥楷桴愠汬洠瑡牥慩獬☠氠扡畯⁲獡爠煥極敲⁤獡瀠牥琠敨搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧‮ 奌兎 潓浭牥 敂摬湥䨯䑁䬯奒呓䱁쨩
畓灰祬‬湩瑳污慬楴湯‬整瑳湩Ⱨ愠摮挠浯業獳潩楮杮传⁦†′潣敲匠楨汥敤⁤楓湧污挠扡敬匮义䱇⁅䅐剉†⸱吠偙⁅›䡓䥅䑌䑅䄬䵒問䕒ⱄ匠义䱇⁅䅐剉匠䝉䅎⁌䅃䱂ⱅ佃䙎剏䥍䝎吠⁏呓乁䅄䑒⁓卉㠺㌱ⰰ䤠㩓㠵ㄳ‬卉㌺㜹ⰵ䤠㩓ㄠ㔵‴⸲䌠乏啄呃剏㨠䴠䱕䥔呓䅒䑎䑅㜨低⹓堠〠㔮䴳⁍䥄⥁‬乁䕎䱁䑅吠义䕎⁄佃偐剅佃䑎䍕佔⹒䌠乏但䵒义⁇佔䤠⁓ㄸ〳漠⁦灡牰癯摥洠歡⁥潣灭敬整眠瑩⁨污慭整楲污⁳…慬潢牵愠⁳敲畱物摥愠⁳数⁲桴⁥楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥ 奌兎 潓浭牥 敂摬湥䨯䑁䬯奒呓䱁Ļ匀灵汰ⱹ椠獮慴汬瑡潩Ɱ琠獥楴杮‬湡⁤潣浭獩楳湯湩⁧晏†㈱⁵慲正椠瑮牥慮潣瑮潲楷楲杮‬⁌湡汧⁥畓灰牯ⱴ搠浵祭䤠⁕灓捡⁥潦⁲慥档愠摮攠敶祲攠畱灩敭瑮‬卍搠潯⁲潦⁲潢桴猠摩⁥湡⁤畳瑩扡敬瀠睯牥猠灵汰⁹湵瑩映牯琠敨愠潢敶攠畱灩敭瑮⁳瑥⹣湉汣摵湩⁧䕏⁍畁桴牯穩瑡潩䄮灰潲敶⁤慍敫㨠嘠污慲正䌯浯慲正丯瑥慲正洯⁹瑳湡⽤ⵄ楌歮ė匀灵汰ⱹ椠獮慴汬瑡潩Ɱ琠獥楴杮‬湡⁤潣浭獩楳湯湩⁧晏†爠煥極敲⁤摡煥慵整堠剌‬剔ⱓ䔠⁐瑓牥潥‬䍒⁁潣湮捥潴獲映牯愠汬猠数歡牥⁳景愠灰潲敶⁤慭敫挠浯汰瑥⁥楷桴愠汬洠瑡牥慩獬☠氠扡畯⁲獡爠煥極敲⁤獡瀠牥琠敨搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧‮丨略牴歩 塍 牋獹慴獬 敂摬湥 敌牧湡⽤慊⥤挀浵猀浱焀瑮⹬刀瑭䬀ͧ煓ɭ捰一协䴀牴䔀捡ͨ敓Ѵ浒⹴䌀浵̮畃ѭ湉档一獯̮敳ʹࠀ
潎s㤀̀瑭Ͳ潮ɳ杫一ͯ潎Ю敳獴䴀牴̮杋ͳ䵒ɔ䝋䰀瑯䴀剔匀呅䨀扯=吀湥敤⁲湉楶楴杮䄠瑵潨楲祴›畓数楲瑮湥楤杮䔠杮湩敥Ⱳ传䑔⁃瑌⹤:一浡⁥景圠牯㩫敄敶潬浰湥⁴景䨠祡摡癥倠瑩慨‬敋摮汵⁩慐瑲䈭樮潃瑮慲瑣丠㩯†䥂⁄䑉久䥔䥆䅃䥔乏丠㩏䈠ⵐ⽉〲㈯㈰ⴵ㘲䐠⹴〠⸳〱㈮㈰‵䜨呓眠汩敢瀠楡⁤硥牴⁡獡愠灰楬慣汢⥥(䈀ぉ〱〱〰〱〱〰〰〰〰〰〰ㄵ䈵ぉ〱〰㄰㈱⠱䥂㄰㄰〰㄰㄰〰〰〰〰〰〰㔰㔱䥂㄰〰〰ㄱ㈲(䈀ぉ〱〱〰〱〱〰〰〰〰〰〰ㄵ䈵ぉ〱〰㄰㈱⠳䥂㄰㄰〰㄰㄰〰〰〰〰〰〰㔰㔱䥂㄰〰〰ㄱ㐲(䈀ぉ〱〱〰〱〱〰〰〰〰〰〰ㄵ䈵ぉ〱〰㄰㈱⠵䥂㄰㄰〰㄰㄰〰〰〰〰〰〰㔰㔱䥂㄰〰〰ㄱ㘲(䈀ぉ〱〱〰〱〱〰〰〰〰〰〰ㄵ䈵ぉ〱〰

Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, sundries, T&P required for the work etc complete as directed by the Engineer-in-charge.

Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royality of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge/Architects.

Brick masonry using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in found. & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:4) finished smooth to surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.

R.C.C. work of M-25 having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

Roof slab

Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)

Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.

Ground floor

1st floor

Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, sundries, T&P required for the work etc complete as directed by the Engineer-in-charge.

Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.

Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royality of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge/Architects.

Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royality of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge/Architects.

R.C.C. work of M-25 having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

Column Base

Ground floor

Column (S/Str.)

Plinth beam

1st floor

Column (S/Str.)

Roof Beam

Roof slab

Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)

Ground floor

1st floor

Brick masonry using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.

Providing 16mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.

Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, sundries, T&P required for the work etc complete as directed by the Engineer-in-charge.

Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royality of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge/Architects.

Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance of all materials labour T&P etc required for the complete in all respect as directed by the Engineer in charge/Architects.