Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.3 LAccepted-AOC | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹16.9 L+₹1.6 L (10.6%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹17.6 L+₹2.3 L (14.7%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹17.8 L+₹2.5 L (16.3%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹23.4 L+₹8.1 L (52.9%)Rejected-Finance 30 B 1 DEEN DAYAL NAGAR NAWABGANJ DEEN DAYAL NAGAR KANPUR NAGAR UTTAR PRADESH 208002 | KANPUR NAGAR | UTTAR PRADESH | 208002 | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
29 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
PERIODICAL SERVICES TO BUILDINGS IN TECH AREA, LOGESTIC SECTN, 140 MC DET, AFCNWP, IFS AND CPRU AT AF STN UNDER GE (AF) PALAM DELHI CANTT-10
2022_MES_521178_2
GENP-16/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹50,000
Yes
24 Apr 2023
28 Jun 2022
30 Aug 2022
28 Jun 2022
29 Aug 2022
13 Jul 2022
Amount
Taking down cement plaster on brick or concrete surfaces etc including raking out joints, hacking for key , scrubbing down with water etc and removing the debris from site to outsite MoD land.
M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing surface even and smooth without using extra cement.on walls complete all as specified .
M&L for 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces on walls including finishing surfaces even and smooth without using extra cement and mixing water proofing compound as per manufacturer's instructions. (Note:WPC shall be measured & paid separately as supply only).
M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces in ceiling including finishing surface even and smooth without using extra cement complete all as specified .
M&L for preparation of newly plastered or unplastered surfaces on walls and applying two coats of oil bound distemper oil emulsion over a coat of primer all as specified and directed by Engineer-in-Charge.
M&L for preparation of newly plastered or unplastered surfaces on walls and applying two coats of cement based paint all as specified and directed by Engineer-in-Charge.
M&L for preparation of newly plastered or unplastered surfaces in ceiling and applying two coats of oil bound distemper oil emulsion over a coat of primer all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treated surface of exterior wall by mechanical sander (RPM 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and then applying two coats of exterior acrylic emulsion paint (Wallmista of Berger paint or equivalent in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make over 2mm thick wall care putty to obtain smooth regular/even finished surface all as specified and prescribed by manufacturer of paint and as directed by Engineer-in-Charge. Notes:-Application of putty shall be as under :- (a) Providing and applying waterproof cement based putty @ minimum 1Kg (undiluted) per Sqm of average thickness 2mm thick of Asian paints or its equivalent as per List of makes over the plastered/ old painted wall after scrapping to prepare the surface even and smooth complete all as specified and directed. (i) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer or its equivalent as per List of makes (Trucare Putty mixer with min 1400W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5kg putty per minute. (ii) Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine or its equivalent as per List of makes having a DC electric motor of 3.3KW having flow speed of max 6 Ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041. (iii) Allow 6-8 hrs time to dry the putty surface. (iv) Sanding of the putty surface with Asian TruCare Wall Sander : L-01/H-01 or its equivalent as per List of makes (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour. (b) The work must be got executed through authorised applicator of manufacturer after concluding an MoU with manufacturer with gurantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (c) All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacturer. (d) After carrying out preparation of surface the same shall be got approved from GE before application of paint for each building. (e) The colour/ shade will be all as approved by GE/ AGE. (f) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.
M&L for complete removal of existing treated surface of exterior wall by mechanical sander (RPM 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and then applying two coats of cement based paint all as specified and prescribed by manufacturer of paint and as directed by Engineer-in-Charge: Note :-(i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacturer;s instruction before application of paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the quoted rates. (ii) The work must be got executed through authorised applicator of manufacturer after concluding an MoU with manufacturer with gurantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii) All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacturer. (iv) After carrying out preparation of surface the same shall be got approved from GE before application of paint for each building. (v) The colour/ shade will be all as approved by GE/ AGE. (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.
M&L for preparation of old painted concrete surface(plain/kerb stone moulded) over 10cm width or girth by cleaning, brushing etc. and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old decroated plastered or unplastered surfaces on walls including cornices pilasters by brooming down or steel wire brushing, scrapping down smoke,soot's mould, moss efflorescent salts and trading oil greasy spot etc and filling cracks / holes by putty applying one coat of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old decroated plastered or unplastered surfaces on walls including cornices pilasters by brooming down or steel wire brushing, scrapping down smoke,soot's mould, moss efflorescent salts and trading oil greasy spot etc and filling cracks / holes by putty applying two coats of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treated surfaces of walls and filling cracks / holes by putty and applying two coats of plastic emulsion interior paint over a coat of primer over 2mm thick wall care putty complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old decroated plastered or unplastered surfaces in ceiling including cornices pilasters by brooming down or steel wire brushing, scrapping down smoke,soot's mould, moss efflorescent salts and trading oil greasy spot etc and filling cracks / holes by putty applying two coats of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering,brushing etc , filling in cavities and cracks etc with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparing old painted surfaces of steel and iron surfaces, over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc, filling in cavities and cracks etc. with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Notes for item No 1 to 16 : (a) The contractor shall remove debris /retrieved material of bldg from site to outsite MoD land. The Qtr shall be neat and tidy after satisfactory maint in all respect faling which a panel recovery at rate of Rs 2000/- per Qtr shall be made from the contractor's due. (b) The Qtr in which maint to be carried out shall be completed within 10 days or as directed by Engr-in-charge after handing over said Qtrs to contractor faling which a panel recovery at rate of Rs 500/- per day for delay shall be made from the contractor's due.. (c) The tint or spot of paint, distemper, white wash etc. on furniture articles and similar items shall be clened in all respect faling which a panel recovery at rate of Rs 500/- per day shall be made from the contractor's due. (d) The contractor shall submit daily report of manpower, material and T&P deployed at site to Engr-in-charge as per CPM chart approved by GE. The quoted rates shall deemed to be included in the items mentioned above and nothing extra shall be paid on account of above provisions.
M/S Blues Developers Pvt. ltd
SHEELSONS ENTERPRISES
JAIPAL and BROS
M/S ASHISH AND CO
ASHUTOSH BUILDERS
DEV CONSTRUCTION
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .