MPLADS- 2025-26 SUPPLY AND FIXING OF SOLAR LED 12M STAGE - HIGH MASS STREET LIGHT AT KALUGUMALAI ROAD (NEAR KUMARAN BUNK) SANKARANKOVIL MUNICIPALITY

Amount

SUPPLY AND FIXING OF SOLAR LED 12M STAGE - HIGH MASS STREET LIGHT AT KALUGUMALAI ROAD (NEAR KUMARAN BUNK) SANKARANKOVIL MUNICIPALITY

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site, labour charges for mixing, laying, compacting and curing concrete etc., complete - Base Concrete

Supplying and erection Centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab, Lintel, Beam, Column, Sunshade including cost and coveyance of all materials to site and all other incidental charges etc complete.,

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the

Supplying and fabrication of Steel Fe 415/500 grade required for all RCC item of works involved including fabrication and labour charges for Cutting, bending, tying, placing in position, includes overlaping length wherever required etc., complete

Supply erection of 8mm free standing double arm bracket 8 sided octogonally continously tapered structured pole with base plate of size 300x300x12mm as per IS 875 with following specifications. Bottom pole dia - 130mm Top Pole Dia - 70mm Thickness of pole - 3mm The pole should be hot tip galvanized confirming to BESN ISO 1461 with thickness of 65 micron

Design, Fabrication, Supply, Installation, Testing and commissioning of 12.0 M High Mast light system with all accessories mast shaft fully hot Dip Galvanized and should with stand wind velocity of 160Km per hour with Gear Box and Motorized Power tool, head frame with Lantern carriage ring etc complete set as per std, Specification.

Supply of 200W LED Flood Light Energy saving lamp luminaries with single piece die cast aluminium housing with reflector complete with all accessories and glass covers with necessary wire connection& testing complete set as per std. Specification

Supply and Installation of Single Phase Street Light controller with RF based Gateway controller Device capability of scheduling the on/off timings of lighting control switchgears based on present timings or based on the available annual sun-rise and annual sun-set timings with GPRS/GSM based remote street light monitoring system with capacity for self-protection from short-circuit, over voltage and anti-theft alert including the 1)System capability to capture and provide following parameters at variable time-intervals a) Live data collection of : b) Voltages c) Current d) Power Factor e) Active Power (kW) f) Metering kWh cumulative g) Number of hours the lamps were glowing 2) Special emergency on/off facility with wireless control 3) Benchmarking capacity so as to generate alert message for: 4) Alert notifications shall be forwarded to android apps. 5) Alert for Door open. 6) Enclosure Box to be IP55 complaint and in case of Metal enclosure has to be corrosion-resistant. 7) 4G modem used should be a Dual-band modem with power consumption less than 5 watts. 8) Energy Meter with ISI marking should be used for power measurement. Class 1.0 accuracy or better energy meter to be used. 9) The rating of the Street Light controller should be at least two times the lighting load. 10) The Street Light Controller should have inbuilt RF Gateway device to be used in conjunction with Individual Lamp Monitoring (ILM) devices for future proof. 11) Design life should be more than 10 years. 12) IN built GATEWAY SPECIFICATIONS. a) Processor : Single board computer. b) Power supply : 90 VAC, 50 Hz c) Surge

MR.SRIKUMAR, CONTRACTOR (BID ID -1443905)