ARMO to GGSIP University, Dwarka Campus, New Delhi. SH Miscellaneous left out works at Dwarka Campus of GGSIPU

Amount

Supplying & erection of flange mounted hot dip galvanized octagonal poles of 12mtrs. height made from 3 mm thick HT steel plate having bottom dia of 210mm & top dia of 90 mm complete with window with full sleeve type cover arrangement at a height of 0.5 / 1 mtrs from the base for cable termination block etc. and galvanized base plate of size 300 mm x 300 mm x 16 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination :- a)Supplying and fixing suitable size and thickness bakelite laminated mounted sheet inside the window mounted on welding 3 nos. G.I strips 4mm thick of suitable length and having suitable size tapped holes b) Supplying and fixing 6 Amp to 32 Amp, SPMCB, ‘C’ Characteristics Curve - 3Nos.

Fabrication, Designing, Supplying & Fixing of MS bracket and suitable to mount 6 no. existing flood light on existing 12 Mtr pole, the pipe of bracket should be 100 mm dia (nominal) and angle iron size of bracket should be 35mm X 35mm X 5mm with tightening nut bolt etc. as per direction of Engineer-In-Charge.

Supplying, installation, testing & commissioning of Flood light LED fitting IP 66 made of pressure die cast aluminum with LED source of 200 watt having following features: Luminous efficcacy >120 lm/watt, CCT = 5700K (nominal), CRI>70, Surge protection device inbuilt 4Kv+External 10kv, Secondary optics with lens, , electronic driver as per specification on the existing light pole with the help of tower wagon etc and as per direction of Engineer-in-charge etc. complete as required.

Making trench less under ground hole across the roads/cement concrete pathway at a depth of about 1 mtr. by means of manual augor and connecting pipes to suit the pipe/cable of size up to 100 mm dia. i/c making excavation on both side of road/pathway for making trenchless hole and refilling the same with excavated soil after laying pipe & cable through trenchless hole. watering. dressing complete as required as per instruction of Engineer-incharge. (Cost of laying of cable & pipe is not included in this item)

Supply of heavy duty 1100 V grade, XLPE insulated, PVC sheathed armoured cable with aluminium conductor for the following size with ISI mark confirming to IS : 7098 part-1 amended up to date as required. 2 x 10 sqmm Aluminium conductor cable

Supply of heavy duty 1100 V grade, XLPE insulated, PVC sheathed armoured cable with aluminium conductor for the following size with ISI mark confirming to IS : 7098 part-1 amended up to date as required. 3.5 x 50 sqmm Aluminium conductor cable

Providing and laying in position 1:2:4 reinforced cement foundation of size 600mmX600mmX1800mm deep i/c excavation of earth, providing , cutting, bending and placing in position, reinforcement of cold twisted bars of 12mm dia-1800mm long (approx) - 8 nos. & reinforcement ring of cold twisted bar of 8mm dia - 2200mm (approx)-12 Nos. equally distanced in lenth of vertical bar as required with positioning of foundation bolts and providing 40 mm (O.D.) DWC, HDPE Pipe of 0.4 mtrs. length for cable entry & exit etc as reqd. (For 12 mtr pole).

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 35 sq.mm upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq.mm upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required Above 35 sq.mm upto 95 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. Above 35 sq.mm upto 95 sq. mm (clamped with 1mm thick saddle)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning nd protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required. 2 X 10 sq. mm (19mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required. 3½ X 50 sq. mm (35mm)

Supplying and fixing 4 Nos. 25mm dia X 750mm long GI foundation bolt (EN8 grade) with nuts, washer including 2 Nos. template of 3 mm thick size 300 mm x 300 mm (Approx.) with 4 nos. 28mm dia holes, to match with PCD of Pole base plate as reqd.

Supply of heavy duty 1100 V grade, PVC Insulated and PVC sheathed flexible cable with copper conductor for the following size with confirming to IS : 694:2010 amended up to date as required. 3 x 2.5 sqmm Copper conductor cable