Repair to road, Path, Hardstanding, Culvert And Road Furniture of AGE B/R-I Under GE (East) Jalandhar Cantt

Amount

Material & Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG-10 at the rate of 5 Kg per 10 Sqm of road surface, laying, rolling, consolidating 30 mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% binder content by weight of total mix laid with mechanical paver roller and compacted to required camber and gradient and rolled with pressure roller and 8 to 10 tonne power road roller to achieve a uniform smooth surface with Pneumatic vibratory roller complete all as specified and directed. Note: Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

Material & Labour for premix bituminous macadam laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with paving bitumen VG-10 @ 4% by weight of total mix complete all as specified and directed.

Repair to potholes any depth, not exc 1sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bitumen primer @ 5 Kg/10 sqm putting in premix as specified for thin bituminous carpet and sealed with liquid seal coat (6.8 kg of binder with 0.09 cum of stone chips and again well rammed (inc supply of premix binder and sand) depth of pot holes not exc 30mm, complete all as specified.

Supply & fix in repairs retro reflective road studs anti scratch microprismatic polycarbonate ultrasonically lens double side fixed in polycarbonate body bitumen, two shanks and epoxy adhesive, complete all as specified and directed. Make : Dark Eye / TATA BP SOLAR

Supply & fix in repairs solar stud of size 107mm x 109mm x 23 mm cast aluminium solar panel 2V/0.3W mono crystalline silicon battery 1.2 V/600 mAh NI MH battery, LED colour red & green working temperature -25 degree celcious to +75 degree celcious blinker type etc capable of bearing traffic loads etc complete incl dismantling of existing solar stud. Make:- DARK EYE /TATA BP SOLAR OR GREENLITE.

Demolition of cement concrete of any description and in any position complete all as specified and directed.

M & L for providing precast cement concrete 1:2:4 type B-1 as in kerb stones,window or door cills,lintels,bressumers,steps,quoin blocks (for use with masonry) string courses,copings, kneelers,apex stones, columns,posts, boundary pillars, bed plates,pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets, etc (of any section indicated) with plain fair faces,including chamfers, weathering,throating etc and setting in CM 1:6 complete with joints to match complete all as specified.

Material & Labour for providing 2.5mm thick road marking strip (retro reflective) broken centre line /side lines / Zebra lines, dashes, arrows etc. on road pavement and the like of any description and width with yellow thermoplastic paint hot applied with machine conforming to BS-3262 and according to the specification laid down by IRC and MOST (Ministry of Surface Transport) specification 2001 (4th revision) complete all as specified and directed.

M & L for preparation of old painted surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of colour (as directed by GE) complete all as specified and as directed.

Material & labour for preparation of new concrete surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of colour as directed by GE complete all as specified and directed.

DUGGAL CONSTRUCTION CO

M/S Malkiat And Sons

SANDEEP JHANJI CONSTRUCTIONS

COSMO BUILDERS