CONSTRUCTION OF BAR ASSOCIATION BUILDING AT MUDALAGI COURT PREMISES AT MUDALAGI IN MUDALAGI TALUKA, BELAGAVI DISTRICT UNDER 4059-80-051-0-32-386 JUDICIAL DEPARTMENT BUILDING

Information on litigation in which the Tenderer is involved:

Other Party/Parties Employer Details of Dispute Amount involved Remarks showing Present Status

BANKER’S CERTIFICATE

This is to certify that M/s. ………………………….. is a reputed company with a good financial standing. If the contract for this work, namely ……………………………… (Name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs. …………… to meet the working capital requirements for executing the above contract

Name of the Bank, Senior Bank Manger

Address:…………………………

List of Machinery

Item of Equipment Requirement Owned/ Hired/Leased Owned/ Hired/Lease and available Remarks

No. Capacity Number/Capacity Age/ Condition

Information of the works for which Tenderer has submitted Tender.

Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs lac. Specified period of completion (including/excluding Monsoon Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.

Information of the works for which Tender acceptance letters are received.

Project Name Name & Address of the Employer Name of Work Tendered Amount in Rs lac Specified period of completion (including/excluding Monsoon Probable Date of Handing over of site

Attach letters of Acceptance received.

Information on works which are yet to be completed.

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon cost of balance works remaining Rs. in lac Probable date of completion

Attach Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Monthly Physical and Financial Progress Achieved in all Contracts which are referred to in Format 3

Names of Works Item of Work Names of Employers 2018-19 Remarks (Indicate contract reference)

January February march April May June July August September October November December

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY

has executed/ is executing(strike off which ever is not applicable) the work of .............................................

in this Organisation. The details of the work is as under:

1 Name of the Project :

2 Name of the Work :

3 Contract Amount :

4 Date of signing the Agreement :

5 Date of handing over of the Site :

Progress * : 2018-19

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2019-20

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2020-21

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2021-22

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2022-23

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

7 Stipulated Period of Completion (including monsoon)

8 Prescribed Date of completion

9 Actual Date of Completion/ Probable Date of Completion

10 Cost of balance work (if work is in progress) :

11 Reasons if any for delay in completion, if work completion is delayed :

12 Penalty if any imposed :

13 Any other information :

* Monthwise progress shall be furnished seperately.

Date: (Authorised Signatory)

Address for correspondence:

Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon Actual date of completion Remarks (appreciation letter received for early completion or reasons, if there is delay in completion)

Attach Workdone Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Financial Year Total value of Civil Engineering works executed and payments received in the last five years (in Rs. lac)

Billed upto date during 2023-24

Attach Chartered Accountant's Yearwise Statements.

PÉ®¸ÀzÀ ºÉ¸ÀgÀÄ : ¨É¼ÀUÁ« f¯Éè aPÉÆÌÃr vÁ®ÆQ£À §¼ÉÆèÁ PÁæ¸ï¢AzÀ ªÀÄÄzsÉÆüÀ ¤¥Áàt gÀ¸ÉÛ ªÀgÉUÉ ªÁíAiÀiÁ gÁªÀÄ¥ÀÆgÀ gÀ¸ÉÛ ¸ÀÄzsÁgÀuÉ ªÀiÁqÀĪÀÅzÀÄ. (UÁæ«ÄÃt gÀ¸ÉÛ)

Sl no Items Qty Rate Amount

Construction of Road

2 Earthwork excavation by mechanical means in hard /ordinary soil involving an average horizontal throw upto 2mtrs. & average lift upto 0.5mtrs. excavated surface levelled and sides neatly dressed etc. the desposed earth to be levelled neatly after the breaking of clods completed as per specifications MORTH clause 301. (P No-139 / 19.2.1) Cum 31.5 4115.5 31.5 0.5

5 Scarifying sqm 3.52 1925 1964.55 0.5

7 KSRRB M500-6.KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WBM, WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 (P No-158 / 21.6 sqm 30.4 8275 30.4 0.5

8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 10.67 8275 10.67 0.5

9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 7867.49 206.875 7867.49 0.5

10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 445.2 430.625 445.2 0.5

1 Embnkment cum 69.3 430 445.2 0.5

Construction of Road

2 Earthwork excavation by mechanical means in hard /ordinary soil involving an average horizontal throw upto 2mtrs. & average lift upto 0.5mtrs. excavated surface levelled and sides neatly dressed etc. the desposed earth to be levelled neatly after the breaking of clods completed as per specifications MORTH clause 301. (P No-139 / 19.2.1) Cum 31.5 4115.5 31.5 0.5

5 Scarifying sqm 3.52 1925 1964.55 0.5

7 KSRRB M500-6.KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WBM, WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 (P No-158 / 21.6 sqm 30.4 8275 2571.45 0.5

8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 10.67 8275 30.4 0.3

9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 7867.49 206.875 7867.49 0.3

10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 445.2 430.625 445.2 0.3

1 Embnkment cum 69.3 430 446.2 0.5

Construction of Road

8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 10.67 8275 10.67 0.2

9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 7867.49 206.875 7867.49 0.2

10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 445.2 430.625 445.2 0.2

11 KSRRB M800-13. Road marking with Hot Applie Thermoplastic Compound with Reflecting Glass Beads on Bitumimous Surface :- Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads at 250gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications. (P No-179 / 24.15) MORTH specification No. 803 sqm 375 537.6 537.6 1

15 KSRRB M800-2. Retro-Reflectorised Traffic Signs :- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 800.1.3, fixed over Aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing complete as per specifications. MORTH Specification No.801 (P No-177 / 24.2.4.1) 80cm x 60cm rectangular - Type-IV sqm 2 3867.15 3867.15 1

16 KSRRB M800 Road markers / Road stud KSRRB M800-35. Providing and fixing of road stud 100x 100 mm, diecast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS: 873 part 4:1973 complete as per specifications (P No-184 / 24.41) no 80 352.8 352.8 1

NAME OF WORK: CONSTRUCTION OF BAR ASSOCIATION BUILDING AT MUDALAGI COURT PREMISES AT MUDALAGI IN MUDALAGI TALUKA, BELAGAVI DISTRICT UNDER 4059-80-051-0-32-386 JUDICIAL DEPARTMENT BUILDING (PWD/2025-26/BD/WORK_INDENT34618)

Sl no Items Unit Qty Rate Amount Milestone -1 Quantity (6 Month) Milestone -2 Quantity (3 Month) Milestone -3 Quantity (3 Month) Total Quantity Rate in Rs. Amount for Mile Stone 1 in Rs Amount for Mile Stone 2 in Rs Amount for Mile Stone 3 in Rs Total Amount in Rs

Construction of Sump tank , septic tank & soak pit.

1 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 55.43 107.1 0

2 1.23 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. Cum 0 2816.1 0

3 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 4.63 6213.9 0

4 6.2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 1.86 8354.85 0

5 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 46.5 290.85 0

1 8.12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer- in-Charge. Sqm 46.5 67.2 0

2 8.11 Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 46.5 59.85 0

3 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 13.88 6853.35 0

4 FORMWORK FOR Sump & Septic Tank @ 35 % of the rate of above concrete item : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 13.88 2398.6724999999997 0

5 2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings Kgs 2 84019.95 0

6 18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. Each 1 2060.1 0

7 15.6 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 68.48 532.35 0

8 17.1 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge Cum 2.36 1052.1 0

9 40 mm down size A-38 (volume 1) Cum 1.57 1190 0

10 20 mm down size A-38 (volume 1) Cum 1.57 1333 0

11 17.3 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. (Volume 2) Cum 1.57 1251.6 0

12 17.13 Providing and laying 100mm thick side wall & bottom slab and of 600mm width for drain with opening using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 150mm spacing jointed in CM 1:3 proportion and nicely finished Including providing holes in the walls wherever necessary including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. m 6.28 5892.6 0

Construction of Ground floor

1 1.12 Earth work in surface excavation by mechanical means for lowering &leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technicalspecifications, including setting out, shoring, strutting,barricading,caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radiusof 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth m3 135 99.75 0

2 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m m3 876.05 107.1 0

3 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. m3 370.139 123.9 0

4 1.23 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. m3 44.36 2816.1 0

5 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. m3 48.01 6213.9 0

6 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 142.42 6538.35 0

7 Form Work for footing m3 142.42 523.068 0

8 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. m3 18.71 6538.35 0

9 Form work for Plinth Beam m3 18.71 3269.175 0

10 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. m3 17.8 6538.35 0

12 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 13.09 7070.7 0

13 Form work for Column m3 13.09 4949.489999999999 0

14 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 26.46 7070.7 0

15 Form work for Lintel and Beam m3 26.46 4242.42 0

16 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 60.4 7070.7 0

17 Form work for Slab m3 60.4 3535.35 0

18 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 3.46 7070.7 0

19 Form work for Staircase m3 3.44 3535.35 0

20 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 2.57 7070.7 0

21 Form work for Chajja m3 2.57 3181.815 0

22 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) m3 30.22 5864.25 0

23 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.. m3 971.28 279.3 0

24 2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings Tonne 26.06 94987.2 0

25 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates m3 37.56 6454.35 0

26 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 89.45 8345.4 0

27 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 733.95 176.4 0

28 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) m2 46.35 7070.7 0

29 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 62.71 368.55 0

30 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge m2 446.65 380.1 0

31 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 864.6575000000001 265.65 0

32 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 1215.29 105 0

33 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm m2 231.64 1299.9 0

34 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 53.09 5592.3 0

35 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. m2 98.36 2585.1 0

36 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) m2 1215.29 165.9 0

37 8.30Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 524.04 182.7 0

38 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 52.42 120.75 0

39 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.85 103755.75 0

40 12.15 Providing and fixing in position fully panelled Honne wood shutters forN doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) m2 21.95 7816.2 0

41 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 54.87 55.65 0

42 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 54.87 144.9 0

43 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. m3 9 1065.75 0

44 8.16 a Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. m2 7.34 1290.45 0

45 11.28 Providing and fixing 304 - grade stainless steel hand rails of 14-gauge pipes for Ramps or Staircase are made out of stainless steel hallow pipes, using 50mm dia for verticals @1.60 mtr c/c are fixed to the ramps or steps by drilling with bolts and 100mm dia MS base plates 10mm gauge for fixing of Vertical pipes 4 - Nos anchor bolts & 40mm dia pipes are fixed horizontally for 2-rows top, one pipes are fixed with vertical pipes another one are fixed with elbows and 25mm dia pipes are fixed horizontally for 2-rows below top measure @ equal intervals including cutting, welding, bending wherever necessary with suitable caps @ tops, bottoms & corners finishing with mat / shining etc., complete including cost and conveyance of all materials, labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work. Ramps or Staircase for physically challenged. M 397 593.25 0

46 12.69.2 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.125mm No 54 255.15 0

47 Providing and fixing Hold fasts for doors etc complete ( Material Components P.No -A25 I.No 444 ) No 54 50 0

48 12.73.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm No 18 46.2 0

49 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 18 1104.6 0

50 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 9 136.5 0

51 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 58.38 1080.45 0

52 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 18.71 929.25 0

53 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 108.25 1458.45 0

54 12.83.2 Providing and fixing factory made uPVC door frame made of uPVCextruded sections having an overall dimension as below (tolerance ± 1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge m3 22.65 250.95 0

55 12.53 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. m2 7.25 1667.4 0

56 11.30.2 Providing & fixing glass panes with putty and glazing clips in steeldoors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. m2 3.07 1320.9 0

57 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. m2 4.32 2924.25 0

58 Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and\compacted to meet requirement of table No. 300-2 m3 39.900000000000006 517.65 0

59 4.1 401 granular Sub-Base A Plant Mix Method Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. v) For Grading -V Material. m3 19.96 2476.95 0

60 Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density m3 14.97 2686.95 0

61 6.8.2 Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) m2 199.5 1219.05 0

62 9.6.1 Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) m2 10.8 1328.25 0

Construction of First floor

1 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 12.01 7141.41 0

2 Form work for Column m3 12.01 4998.9849 0

3 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 24.72 7141.41 0

4 Form work for Lintel and Beam m3 24.72 4284.84 0

5 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 57.57 7141.41 0

6 Form work for Slab m3 57.57 3570.7 0

7 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 3.43 7141.41 0

8 Form work for Staircase m3 3.43 35070.7 0

9 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 2.57 7141.41 0

10 Form work for Chajja m3 2.57 3213.63 0

11 2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings Tonne 10.73 95937.07 0

12 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates m3 1.2 6518.89 0

13 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 84.19 8428.85 0

14 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 56.58 1091.25 0

15 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 726.1099999999999 178.16 0

16 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) m2 49.599999999999994 7141.41 0 0

17 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge m2 441.15999999999997 383.9 0 0

18 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 863.28 268.31 0 0

19 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 1079.91 106.05 0 0

20 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm m2 223 1312.9 0 0

21 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 46.02 5648.22 0 0

22 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 33.01 938.54 0 0

23 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 112.39 1473.03 0 0

24 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) m2 1079.91 167.56 0 0

25 8.30Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 441.15999999999997 184.53 0 0

26 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 51.86 121.96 0 0

27 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.63 104793.31 0 0

28 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) m2 15.86 7894.36 0 0

29 12.83.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge m2 36.2 253.46 0 0

30 12.53 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. m2 12.92 1684.07 0 0

31 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 39.6375 56.21 0 0

32 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 39.64 146.35 0 0

33 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. m2 7 1076.41 0 0

34 11.28 Providing and fixing 304 - grade stainless steel hand rails of 14-gauge pipes for Ramps or Staircase are made out of stainless steel hallow pipes, using 50mm dia for verticals @1.60 mtr c/c are fixed to the ramps or steps by drilling with bolts and 100mm dia MS base plates 10mm gauge for fixing of Vertical pipes 4 - Nos anchor bolts & 40mm dia pipes are fixed horizontally for 2-rows top, one pipes are fixed with vertical pipes another one are fixed with elbows and 25mm dia pipes are fixed horizontally for 2-rows below top measure @ equal intervals including cutting, welding, bending wherever necessary with suitable caps @ tops, bottoms & corners finishing with mat / shining etc., complete including cost and conveyance of all materials, labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work. Ramps or Staircase for physically challenged. m 141 599.18 0 0

35 12.69.20 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.125mm Each 42 257.7 0 0

36 Providing and fixing Hold fasts for doors etc complete ( Material Components P.No -A25 I.No 444 ) Each 42 53.03 0 0

37 12.73.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm Each 14 46.66 0 0

38 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Each 14 1115.65 0 0

39 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Each 14 137.87 0 0

40 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. m2 75.99 2610.95 0 0

41 11.30.2 Providing & fixing glass panes with putty and glazing clips in steeldoors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. m2 2.26 1334.11 0 0

42 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. m2 6.4799999999999995 2953.49 0 0

Construction of Second floor

1 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 11.55 7212.11 0

2 Form work for Column m3 11.55 5048.48 0

3 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 23.43 7212.11 0

4 Form work for Lintel and Beam m3 23.43 4327.2684 0

5 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 57.57 7212.11 0

6 Form work for Slab m3 57.57 3606.0570000000002 0

7 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 3.43 7212.11 0

8 Form work for Staircase m3 3.43 3606.0570000000002 0

9 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 2.57 7212.11 0

10 Form work for Chajja m3 2.57 3245.4513000000006 0

11 2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings Tonne 13.67 96886.94 0

12 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates m3 1.21 6583.44 0

13 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 59.43 8512.31 0

14 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 53.97 1102.06 0

15 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 1069.7400000000002 179.93 0

16 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) m2 49.900000000000006 7212.11 0 0

17 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge m2 381.31 387.7 0 0

18 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 682.69 270.96 0 0

19 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 928.23 107.1 0 0

20 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm m2 285.5 1325.9 0 0

21 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 46.02 5704.15 0 0

22 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 24.77 947.84 0 0

23 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 78.21 1487.62 0 0

24 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) m2 928.23 169.22 0 0

25 8.30Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 381.31 186.35 0 0

26 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 38.504999999999995 123.17 0 0

27 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.30000000000000004 105830.87 0 0

28 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) m2 14.6 7972.52 0 0

29 12.83.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge m2 25.8 255.97 0 0

30 12.53 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. m2 9.14 1700.75 0 0

31 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 40.27 56.76 0 0

32 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 40.27 147.8 0 0

33 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. m2 6 1087.07 0 0

34 11.28 Providing and fixing 304 - grade stainless steel hand rails of 14-gauge pipes for Ramps or Staircase are made out of stainless steel hallow pipes, using 50mm dia for verticals @1.60 mtr c/c are fixed to the ramps or steps by drilling with bolts and 100mm dia MS base plates 10mm gauge for fixing of Vertical pipes 4 - Nos anchor bolts & 40mm dia pipes are fixed horizontally for 2-rows top, one pipes are fixed with vertical pipes another one are fixed with elbows and 25mm dia pipes are fixed horizontally for 2-rows below top measure @ equal intervals including cutting, welding, bending wherever necessary with suitable caps @ tops, bottoms & corners finishing with mat / shining etc., complete including cost and conveyance of all materials, labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work. Ramps or Staircase for physically challenged. m 141 605.12 0 0

35 12.69.20 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.125mm Each 36 260.25 0 0

36 Providing and fixing Hold fasts for doors etc complete ( Material Components P.No -A25 I.No 444 ) Each 36 53.55 0 0

37 12.73.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm Each 12 47.12 0 0

38 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Each 12 1126.69 0 0

39 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Each 12 139.23 0 0

40 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. m2 31.48 2636.8 0 0

41 11.30.2 Providing & fixing glass panes with putty and glazing clips in steeldoors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. m2 2.08 1347.32 0 0

42 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. m2 6.4799999999999995 2982.74 0 0

Construction of Terrace floor

1 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 5.27 7282.821000000001 0

2 Form work for Column m3 5.27 5097.9747 0

3 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 3.43 7282.821000000001 0

4 Form work for Lintel and Beam m3 3.43 4369.6926 0

5 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 5.5 7282.821000000001 0

6 Form work for Slab m3 5.5 3641.4105000000004 0

7 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 0.08 7282.821000000001 0

8 Form work for Chajja m3 0.08 3277.2694500000002 0

9 2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings Tonne 1.89 97836.81599999999 0

10 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates m3 1.24 6647.9805 0

11 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 17.11 8595.761999999999 0

12 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge m2 239.77 399.07349999999997 0 0

13 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 68.72 273.61949999999996 0 0

14 8.30Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 239.77 188.181 0 0

15 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm m2 2.62 1338.8970000000002 0 0

16 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) m2 100.3 170.877 0 0

17 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.08 106868.4225 0 0

18 12.15 Providing and fixing in position fully panelled Honne wood shutters forN doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) m2 2.2 8050.686 0 0

19 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 5.5125 57.319500000000005 0 0

20 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 5.5125 149.24699999999999 0 0

21 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. m2 1 1097.7225 0 0

22 12.69.2 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.125mm Each 6 262.8045 0 0

23 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No -A25 I.No 444 ) Each 6 54.075 0 0

24 12.73.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm Each 2 47.586 0 0

25 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 1 1137.7379999999998 0 0

26 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Each 1 140.595 0 0

27 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge m2 370.14 883.5855 0 0

28 12.83.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge m 5 258.4785 0 0

29 12.53 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. m2 1.58 1717.422 0 0

30 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. m2 9.54 2662.6530000000002 0 0

31 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 87.53 1112.8635 0 0

UPS and Batteries

13 Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 5 kVA OFF LINE UPS Each 1 39898 0 0

14 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 120 AH capacity Each 6 15514 0 0

Water Supply & Sanitary work

1 652 PVC pipe - OD 25mm and 10 Kg/sqcm m (VOL -5 , PAGE NO-A-44). m 150 24.15 0 0

2 654 PVC pipe - OD 32mm and 10 Kg/sqcm m (VOL -5 , PAGE NO-A-44). m 240 34.65 0 0

3 2.82 Supply of PPR Double Union Ball Valve confirming to IS 15801-2008 and DIN Standards 8077/8092

2.82.1 PPR Double Union Ball Valve 20mm Nos 15 828.45 0 0

2.82.2 PPR Double Union Ball Valve 25mm Nos 10 1129.8 0 0

2.82.3 PPR Double Union Ball Valve 32mm Nos 10 1873.2 0 0

4 2.78 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092. Nos

2.78.2 PPR Male Threaded Elbow 20X1/2mm Nos 60 86.1 0 0

2.78.3 PPR Male Threaded Elbow 25X1/2mm Nos 60 102.9 0 0

2.78.5 PPR Male Threaded Elbow 32X1/2mm Nos 60 136.5 0 0

5 2.77 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 Nos

2.77.2 PPR Female Threaded Elbow 20X1/2mm Nos 60 58.8 0 0

2.77.3 PPR Female Threaded Elbow 25X1/2mm Nos 60 73.5 0 0

2.77.5 PPR Female Threaded Elbow 32X1/2mm Nos 60 117.6 0 0

6 2.76 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092.

2.76.2 PPR Male Threaded TEE 20X1/2mm Nos 60 96.6 0 0

2.76.3 PPR Male Threaded TEE 25X1/2mm Nos 60 107.1 0 0

2.76.5 PPR Male Threaded TEE 32X1/2mm Nos 60 156.45 0 0

7 2.75 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092

2.75.2 PPR Female Threaded TEE 20X1/2mm Nos 60 63 0 0

2.75.3 PPR Female Threaded TEE 25X1/2mm Nos 60 77.7 0 0

2.75.5 PPR Female Threaded TEE 32X1/2mm Nos 60 124.95 0 0

8 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. L 4000 9.73 0 0

9 13.6.1.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore-Horizontal Nos 20 651 0 0

10 13.3.2 Providing and fixing brass stop cock of approved quality : 20 mm nominal bore Nos 30 320.25 0 0

11 13.3.2 Providing and fixing brass stop cock of approved quality : 20 mm nominal bore Nos 10 971.25 0 0

12 1.6.1 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m cum 10.12 508.2 0 0

13 633 Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia (VOL -5 , PAGE NO-A-43). m 100 400.05 0 0

14 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Nos 13 6275.85 0 0

15 14.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Nos 16 3009.3 0 0

16 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Nos 16 4676.7 0 0

17 14.31Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Nos 18 1281 0 0

18 14.40.2 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 g. Nos 16 520.8 0 0

19 13.46 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 75mm outlet, hubless centrifugally cast (spun) iron epoxy coated inside and outside IS: 15905 (REFER 1st Corrigendum and Addendum order - 21-04-2022) Each 14 498.75 0 0

20 16.8 Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover nos 2 5030.55 0 0

21 16.10 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. nos 2 4447.8 0 0

22 13.32.2. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes m 150 397.95 0 0

23 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes m 150 310.8 0 0

24 647 PVC pipe - OD 110mm and 6 Kg/sqcm (VOL -5 , PAGE NO-A-44). m 360 267.75 0 0

25 680 PVC pipes of 8 Kg/cm2 for 75mm(0.917)m (VOL -5 , PAGE NO-A-45). m 100 149.1 0 0

26 10.9 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 0 0

26 10.9.6 - 75 mm dia PVC Elbows Each 20 201.6 0 0

10.9.8 - 110 mm dia PVC Elbows Each 20 317.1 0 0

Providing Pumping Machinery/Equipments with the required electrical and pipe line works

1 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete. 13.4 1.00 HP/0.75KW 7 STG (RWS SR - V 2023-24, Page No- 149 , I.N 13.4 ) Each 1 13318 0 0

2 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.(RWS - V SR 2023-24,Page No-154, I.No- 13.22 ) m 100 185 0 0

3 Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.(RWS - V SR 2023-24,Page No-154, I.No-13.23 ) Nos 1 416 0 0

4 Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments (RWS - V SR 2023-24,Page No-154, I.No-13.24 ) Nos 2 1450 0 0

5 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (RWS - V SR 2023-24,Page No-154, I.No-13.25 ) Nos 2 1550 0 0

6 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump:1 No MCB1No. DOL of S/D Starter suitable for respective HP1No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOL-Direct Online Starter 2) S-D- Star Delta Starter(RWS - V SR 2023-24,Page No-154, I.No-13.23 ) rmt 1 6500 0 0

7 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. (RWS - V SR 2023-24,Page No-155, I.No-13.25 ) Kvar 3 550 0 0

8 Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. (RWS - V SR 2023-24,Page No-155, I.No-13.26 ) PER 3POLE 2 1150 0 0

9 Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) (RWS - V SR 2023-24,Page No-155, I.No-13.27 ) Each 2 3575 0 0

10 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars, rubber profile ring,vibration control profile ring, freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments (RWS - V SR 2023-24,Page No-155, I.No-13.28 ) m 100 550 0 0

11 Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets (RWS - V SR 2023-24,Page No-155, I.No-13.29) set 2 1550 0 0

12 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (RWS - V SR 2023-24,Page No-156, I.No-13.32) Job 1 6500 0 0

13 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work.. (RWS - V SR 2023-24,Page No-156, I.No-13.33) Job 1 1350 0 0

14 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work.(RWS - V SR 2023-24,Page No-156, I.No-13.34) Job 1 1450 0 0

15 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. (RWS - V SR 2023-24,Page No-156, I.No-13.35) rmt 80 195 0 0

16 Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. (RWS - V SR 2023-24,Page No-156, I.No-13.36) mtr 80 135 0 0

17 Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work. (RWS - V SR 2023-24,Page No-156, I.No-13.38) Each 2 450 0 0

18 Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit.The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. (RWS - V SR 2023-24,Page No-156, I.No-13.39) Job 1 3750 0 0

1 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. Four Pole 100 A 25 kA Each 2 8487 0 0

2 Supplying and fixing of Shunt trip suitable for MCCB.CBCT Each 1 1703 0 0

3 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 125 A Each 1 10326 0 0

4 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 1 9255 0 0

5 Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. Each 1 4390 0 0

6 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 1 9315 0 0

7 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. Each 6 562 0 0

8 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 3 515 0 0

9 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips m 2 2465 0 0

10 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm m 20 305 0 0

11 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 75 x 6 mm m 10 555 0 0

12 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG cm2 150000 0.5 0 0

13 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia Nos 11 3510 0 0

14 GI/Copper strips for grounding connections, using necessary fixing materials as required. GI/Copper strips 25 x 3 mm GI strip m 85 82 0 0

15 GI/Copper strips for grounding connections, using necessary fixing materials as required. 600 x 600 x 3 mm Copper plate Each 2 7421 0 0

LAN Networking and CCTV

1 Supplying and drawing UTP-CAT 6E LAN cable. m 370 38 0 0

2 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2Pair m 250 21 0 0

3 Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. m 150 44 0 0

4 Supplying & Fixing of switch mounting rack with power manager & Cable manager. 4U with 450mm depth Each 2 4892 0 0

5 Supplying & Fixing of switch mounting rack with power manager & Cable manager. 9U with 450mm depth Each 1 8476 0 0

6 Supplying fixing of Network Switches 24 port 10/100/1000 Switch Each 1 7415 0 0

7 Supplying fixing of Network Switches 16 port 10/100/1000 Switch Each 4 6440 0 0

8 Supplying & fixing of I/O socket with back box Single I/O Each 26 490 0 0

9 Supplying & Fixing of ... ms Cat 6 Patch Cable 1 m Each 26 224 0 0

10 CP PLUS 2MP (1920 x 1080 Pixel) or better Dome Camera CP PLUS (CP-UNC-VE21ZL4C-VMDS-Q) Type of Camera Housing Dome Camera IP Camera Yes Camera Image Sensing capacity 2MP (1920 x 1or better Maximum Frame Rates(frames persecond) Supported 25/30 Number of simultaneous videoStreams QuadStream(Full/C IR illumination Range(meter) 31-50 Installation Type/ Area of use Indoor Each 8 7000 0 0

11 GODREJ SECURITY SOLUTIONS 32Channels DVR with Full HD (1920x 1080) GODREJ SECURITYSOLUTIONS (STE-UR32S2-1080P) Type of RecorderDVR Total Number of Input Channels 32 Maximum Recording Resolutionsupported Full HD (1920x 1080) Recording Speed for all channels(fps) Upto 30 Hard Disks ProvidedNo Total Storage Capacity (TB) of thehard disk provided 8 valid BIS certificate as per IS 13252under CRS Yes (required) Each 1 20000 0 0

12 Consistent 12000GB 3.5 inch Internal Hard Disk Drive (HDD) Consistent (CONSISTENT 12TB HARD DISK) Description of Stores Internal HardDisk Drive(HDD) Intended Application DesktopComputer/Allin OnePC/Mini PC,Server,NetworkAttachedStorage(NAS),StorageAreaNetwork Each 1 24575.3 0 0

13 BROADWELL 5 Star LED (Light Emitting Diode) Full HD (1920 x 1080) TV BROADWELLR (BROADWELL 65" SMART LED TV (BD-6500)Duty Cycle of Product (Number ofoperation hours per day X numberof days in week) 8 x 7 Native Resolution of Display(Pixels)Full HD (1920x 1080) BEE Star Rating of the product 5 Star Diagonal Display Size (in inches) Between 60and 70 (152.4and 177.8 cm) Display Technology LED (LightEmittingDiode) Each 1 81945 0 0

External Electrification

1 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS- 1554 (Part-1) or IS-7098 Part-1, Armouring strip 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) KM 0.1 178973.2296 0 0

2 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975̤ 95 Sqmm, (54 GI Wires - 2.5 mm Dia) KM 0.1 889666 0 0

3 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 3x95 to 150 Sqmm KM 0.1 61322 0 0

4 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff--2.5 to 25 Sqmm Km 0.1 20886 0 0

5 Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule 3x95 Sqmm Set 2 7311 0 0

6 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm Set 2 4067 0 0

7 Heat Shrinkable Indoor Type Cable Termination Kit for PILC Cable 3x95 Sqmm Set 2 3138 0 0

8 RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 No 4 7076 0 0

9 PSCC Pole - 9 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards No 2 4199 0 0

10 Spiral Earth Electrode No 2 239 0 0

11 11 kV, Horizontal Cross Arm - Galvanised Iron (GI) No 2 487 0 0

12 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) No 6 205 0 0

13 11 kV, 45 kN Polymeric Insulator No 6 186 0 0

14 Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM KM 0.8 46234 0 0

15 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) Set (3 Nos) 1 1069 0 0

16 11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018) Set 1 9450 0 0

17 LT Protection Kit (Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018) No 1 2023 0 0

18 Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 B. CABLE ENTRY TYPE 63 kVA, Aluminum Wdg, Star 2 (5 Star) No 1 186170 0 0

19 H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS Set 1 4332 0 0

20 Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977 For 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - MS Set 1 22209 0 0

21 LT Metering Cubicle at Low Tension for 50 KW to 150 KW having specification & design as per the prototype approval (Excluding Meter Cost & Modem Cost) Unit 1 79882 0 0

22 Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth No 4 1113 0 0

23 Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth No 2 1113 0 0

24 Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) No 2 93 0 0

25 Fixing guarding including fixing of necessary cross arms for existing HT and LT line at Road Crossing, Telephone Line Crossings upto span of 60 Mtr Per Set 4 1034 0 0

26 do - for Rabbit ACSR Per KM/Wire 0.8 4361 0 0

27 Fixing of GOS including wiring (11 kV Single Break 200 Amps) Set 1 1104 0 0

28 Fixing of LT Protection Kit Per Kit 1 356.0046875 0 0

29 Erection of 200 - 250 kVA Transformer Each 1 2278 0 0

30 Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting of Transformer as per approved drawing For 100 to 250 kVA Per Structure 1 5963 0 0

31 Erection of LT metering Cubicle on Platform. NO 1 1659 0 0

Internal Wiring

1 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thick m 920 66 0 0

2 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick m 410 78 0 0

3 Supplying heavy gauge PVCConduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2 mm thick m 380 68 0 0

4 Supplying heavy gauge PVCConduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25 mm dia 2 mm thick m 230 79 0 0

5 Supplying And Fixing Metal Fan Box with Round Hook. no 58 117 0 0

6 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box point 46 269 0 0

7 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box point 56 379 0 0

8 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box point 109 555 0 0

9 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mm2 m 1030 26 0 0

10 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mm2 m 1540 42 0 0

11 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 mm2 m 1150 63 0 0

12 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 6 mm2 m 950 92 0 0

13 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3 Way Each 21 159 0 0

14 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 Way Each 8 177 0 0

15 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way Each 11 220 0 0

16 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way Each 12 261 0 0

17 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way Each 47 319 0 0

18 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module Each 21 161 0 0

19 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 8 175 0 0

20 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 11 234 0 0

21 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 12 284 0 0

22 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module Each 47 344 0 0

23 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 337 102 0 0

24 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch Each 4 166 0 0

25 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Each 126 171 0 0

28 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 58 357 0 0

29 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 1 177 0 0

30 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push Each 11 326 0 0

31 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 11 236 0 0

17 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket Each 2 156 0 0

18 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6 Each 1 337 0 0

19 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP Each 56 415 0 0

20 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP Each 6 739 0 0

21 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN Each 8 3088 0 0

22 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 4 Way TP & N Each 2 4038 0 0

23 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 17 1492 0 0

24 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model Each 58 2984 0 0

25 Supplying & fixing - flexible LED Strip Light ..... W Power consumption in 5 ms length CCT6500 degree K, CRI> 70%. efficacy >80 lumen per W, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver non integrated, with PF > 0.95, power loss should< 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved with 2 years Warranty against any manufacturing defect working under standard electrical condition. m 15 1291 0 0

26 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W Each 120 690 0 0

27 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI> 70%. efficacy > 100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 1'x1' 18W Each 12 3138 0 0

28 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI> 70%. efficacy > 100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2'x2' 40-42W Each 2 4861 0 0

29 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per W, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 9W, 6500K Each 21 154 0 0

30 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell Each 2 246 0 0

31 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 17 707 0 0

32 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders Each 167 122 0 0

33 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 58 315 0 0

34 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT>5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor > 0.9 with mains, Surge Protection - Min 5KV along with Over voltage / Overload, short circuit /miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS10322/IEC60598, LM79&LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools .LED Light fixture with........W System Power consumption.LED Efficiency >1301m/w, nominal CRI > 75̤ Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier word mark/name shall be Engraved / Embossing on the die cast housing / Bod ypart. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source. LED Streetlight 120 W Each 5 10060 0 0

35 Supplying and Fixing........mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires. Using 25mm dia G.I.Pipe Each 5 1203 0 0

Total Amount Grand Total Rs

1 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Motor Grader- In area of light jungle ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 7/2.6iiiA vol-3 Hectare 0.36 146982.15 53310.43 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 Compacting Original Ground- Loosening, leveling Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 15/3.7 vol-3 Cum 784.69 91.35 71681.2 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

4 Earth work Mechanical Means Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 8/1.12 vol-1 Cum 24.15 68.25 1648.24 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

6 Surface Drains in Soil Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. Mechanical Means ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 132/20.8-b vo-3 Rmtr 2092.5 19.01 39778.42 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

9 Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 24/4.27 A vol-3 Cum 1918.12 2513.7 4821590.81 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B4%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

13 Semi Dense Bituminous Concrete Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 145/21-A vol-3 Cum 191.81 11107.95 2130643.66 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B5%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

15 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 57/8.15 vol-3 Sqm 279 501.9 140030.1 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B6%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

17 Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2012. 60 cm equilateral triangle ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 54/8.5 iV vol-3 No 10 3738 37380 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B7%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

18 Direction and Place Identification Signs upto 0.9 m2 Size Board. Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 55/8.7 vol-3 Sqm 7.2 8471.4 60994.08 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B8%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

19 Road Studs Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 150/21-Cvol-3 No 154 383.25 59020.5 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B9%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

20 Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per m2 using mechanical means. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 29/5.1 1Ai vol-3 Sqm 7672.5 46.2 354469.5 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B10%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

21 Tack coat on Bituminous surface Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 145/21Aiii vol-3 Sqm 7672.5 13.65 104729.62 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B11%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

22 KSRRB M300-53. Construction of embankment with approved material Gravel/Murrum with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement Table 300-2 complete as per specifications, including cost of gravel / murrum, watering charges & compaction by vibratory roller to 95% of proctors density. MORTH Specification No. 305 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 1.8/7/vol-3 Cum 5053.2 422.1 2132955.72 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B12%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

23 Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 3.6/15/vol-3 Cum 5161.5 433.65 2238284.48 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B13%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

24 Granular Sub-Base-By Mix in Place Method Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401-For Grading -V Material ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 4.2-v/19/vol-3 Cum 1953 2345.7 4581152.1 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B14%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

25 Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast) ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 8.16-ii/57/vol-3 Each 2 2566.2 5132.4 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B15%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

26 Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 5.8-C/31/vol-3 Cum 383.62 8302.35 3184989.02 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B16%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 15/2.1.3 vol-1 Cum 6.63 6039.6 40042.55 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 17/2.4.2 vol-1 Cum 85.11 7094.3 603767.5 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

4 Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 71/9.3 vol-3 M.T. 0.85 99009.75 84267.2 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

5 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing, including cost of materials, labour, HOM complete as per specifications.Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 I 2300 ....750mm. dia Page No. 254, I.No.34.6.4 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 135/20.1 63C Rmtr 20 3353.7 67074 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

6 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing, including cost of materials, labour, HOM complete as per specifications.Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 I 2300 ....1000mm. dia Page No. 254, I.No.34.6.4 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 135/20.1 63C Rmtr 40 6459.6 258384 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B4%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

7 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing, including cost of materials, labour, HOM complete as per specifications.Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 I 2300 ....1000mm. dia Page No. 254, I.No.34.6.4 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 135/20.1 63C Rmtr 10 6459.6 64596 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B5%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 7/1.8/vol-1 Rmtr 84.46 422.1 35650.9 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B6%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

9 Earth work in surface excavation by mechanical means for lowering and levelling the ground for all works other then foundation in all kinds of soils and upto depth not exuceeding 300mm, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleteriours matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 8/1.14/vol-1 Cum 127.25 76.65 9753.71 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B7%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

Grand Total of Detail Estimates 1163535.86

Item Code : As per Electrical SR 3689 15 No --- 55335

Item Name : P.S.C pole 9 mtr long 200 Kg WL -Material Cost

2 Item Code : As per Electrical SR 1166 15 No --- 17490

Item Name : P.S.C pole 9 mtr long 200 Kg WL -Labour Cost

3 Item Code : As per Electrical SR 3054 3 No --- 9162

Item Name : P.S.C pole 8.00 mtr long 145 Kg WL for stud -Material Cost

4 Item Code : As per Electrical SR 932 3 No --- 2796

Item Name : P.S.C pole 8.00 mtr long 145 Kg WL for stud -Labour Cost

5 Item Code : As per Electrical SR 162 4 No --- 648

Item Name : L.T.2 Pin cross arms, with pole clams, bolts, nuts and washers (for PCC poles) -Material Cost

6 Item Code : As per Electrical SR 106 4 No --- 424

Item Name : L.T.2 Pin cross arms, with pole clams, bolts, nuts and washers (for PCC poles) -Labour Cost

7 Item Code : As per Electrical SR 438 10 No --- 4380

Item Name : Horizontal cross arms with pole clams, HTST support, bolts, nuts and washers (for PSC poles) -Material Cost

8 Item Code : As per Electrical SR 106 10 No --- 1060

Item Name : Horizontal cross arms with pole clams, HTST support, bolts, nuts and washers (for PSC poles) -Labour Cost

9 Item Code : As per Electrical SR 17450 2 No --- 34900

Item Name : D.P Structure with 9 mtr RCC poles -Material Cost

10 Item Code : As per Electrical SR 3578 2 No --- 7156

Item Name : D.P Structure with 9 mtr RCC poles -Labour Cost

11 Item Code : As per Electrical SR 180 40 No --- 7200

Item Name : 11 KV pin insulators with GI pins -Material Cost

12 Item Code : As per Electrical SR 164 18 No --- 2952

Item Name : 45 KV Pin Insulators with GI Pins -Material Cost

13 Item Code : As per Electrical SR 4000 2 No --- 8000

Item Name : Guarding bitween HT and LT Lines Guarding materials -Material Cost

14 Item Code : As per Electrical SR 1165 2 No --- 2330

Item Name : Guarding bitween HT and LT Lines Guarding materials -Labour Cost

15 Item Code : As per Electrical SR 830 1 No --- 830

Item Name : Guy Sets -Material Cost

16 Item Code : As per Electrical SR 390 1 No --- 390

Item Name : Guy Sets -Labour Cost

17 Item Code : As per Electrical SR 36497 0.5 No --- 18248.5

Item Name : Rabbit ACSR Conductor -Material Cost

18 Item Code : As per Electrical SR 2869 0.5 No --- 1434.5

Item Name : Rabbit ACSR Conductor -Labour Cost

19 Item Code : As per Electrical SR 79 18 No --- 1422

Item Name : PG Clamps for rabbit conductor -Material Cost

20 Item Code : As per Electrical SR 165 15 No --- 2475

Item Name : Spiral earth electrode -Material Cost

21 Item Code : As per Electrical SR 61 15 No --- 915

Item Name : Spiral earth electrode -Labour Cost

22 Item Code : As per Electrical SR 191 15 No --- 2865

Item Name : EG Strirrups with GI Wire Lacing -Material Cost

23 Item Code : As per Electrical SR 109 15 No --- 1635

Item Name : EG Strirrups with GI Wire Lacing -Labour Cost

24 Item Code : As per Electrical SR 174 1 No --- 174

Item Name : Guy concerting with Boulders, mud andsand -Labour Cost

25 Item Code : As per Electrical SR 146 15 No --- 2190

Item Name : Caution/Danger board as per Drawing No Bescome/GM/CP/40/Dt 24.10.07 -Material Cost

26 Item Code : As per Electrical SR 53 15 No --- 795

Item Name : Caution/Danger board as per Drawing No Bescome/GM/CP/40/Dt 24.10.07 -Labour Cost

27 Item Code : As per Electrical SR 76 14 No --- 1064

Item Name : Antu-Climbing Device (12 mtr/1 kg GI Barbed wire) Lumsum -Material Cost

28 Item Code : As per Electrical SR 28 14 No --- 392

Item Name : Antu-Climbing Device (12 mtr/1 kg GI Barbed wire) Lumsum -Labour Cost

29 Item Code : As per Electrical SR 33292.35 1 No --- 33292.35

Item Name : Reaising above @90%