Renovation of Single Window Office Situated on Third Floor of Nepal House, Doranda, Ranchi

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, scaffolding raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed fromM.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of requiredlength with nuts & bolts of required size and other end of anglehanger fixed with intermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, to which the ceilingsection 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointingcompound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer's specification andalso including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin-charge and as per manufacturer's specification, withll 4 side tapered and backed by acoustical tissue withNRC value not less than 0.60

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Applying priming coats with primer of approved brand and manufacture,having lowVOC(Volatile organic compound)content:with water thinnable cement primer on wall surface having VOC content less than 50grams/litre

Providing and fixing factory made Upvc glazed /wire mesh windows/doors comprising of lead free uPVC multi-chambered fame,sash and mullion/coupler (where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I wire mesh/Glazing of plain/toughened/laminated/double glass unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid separately.(Note-structural design proof checked from a Goverment Engineering Institure,to be provided by the manufacturer for (i)sites with basic wind speed> 45m/sec as per IS 875-part 3(ii)sites with structure height more than 20m for all wind speeds.

Three track three panels sliding window with two glazed & one wire mesh panels with aluminium channel for roller track,wool pile,nylon rollers with SS 304 body using R2 series withframe (70mm & above)(40mm&above)& both glazed and fly scen sash(25mm&above)x(50mm & above) with zinc ally (zamak) powder coated touch locks with hook(height upto 1.2metre)

Providing and fixing factory made Upvc glazed /wire mesh windows/doors comprising of lead free uPVC multi-chambered fame,sash and mullion/coupler (where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I wire mesh/Glazing of plain/toughened/laminated/double glass unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid separately.(Note-structural design proof checked from a Goverment Engineering Institure,to be provided by the manufacturer for (i)sites with basic wind speed> 45m/sec as per IS 875-part 3(ii)sites with structure height more than 20m for all wind speeds.

Fixed window/ventiator with mulion/transom Using R1 series with frame(33mm&above)x(35mm&above)&mullion(33mm&above)x(50mm&above)(Height upto 0.90metre)

Providing and fixing factory made Upvc glazed /wire mesh windows/vdors comprising of lead free uPVC multi-chambered fame and mulion(where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I

Ventilator casement window single panel with or without fixed panel with S.S.304 friction hinges as per size and weight of sash,single point locking zinc alloy(zamak)powder coated handles. Using R1 series withframe(33mmxabove)x(35mm&above)&sash/mullion(33mm&above)x(50mmxabove)(Height upto 0.96metre)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 4.0mm thickness(weight not less than 10kg/sqm)

Providing and fixing fly proof wire gauze to windows,clearstory windows& doors with M.S.flat 15x3mm and nuts & bolts complete Galvansied M.S.wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including all complete job.as per direction of E/I.

Filling the gap in between aluminium/stone /wood/ceramic/Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings kand direction of Engineer-in-charge complete.complying to ASTM C920,DIN 18540-F&ISO 11600:upto 5mm depth and 5mm width.

Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and coceletial windows openings, including wedge over all clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

Providing and fixing 4mm thick coir venee board,ISI maked IS 14842 plain lining with necessary screws,priming coat on unexposed surface etc.including all complete job

Providing 50X150mm teak wood handrail with good quality of teak wood of av. 2.5M length with smooth finishing and rounded edges properly fitted to the railing including cost ofspreet polishing of approved shade and make all complete as drawig specification and direction of E/I.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below.

1.The surface to be polished in rubbed with sand paper 80/120 no and then with sand paper of 160/180nos

2-Applying two coats of sealer with spray gun and allowing sufficient drying time for Ist coat and 2nd coat is allwed to dry for 8 to 12 hrs

3-On drying of sealer coat,wet rubbing with emery cloth of finer grading with ample wataer to rremove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allwed todry for 12hrs.

4.On this ,Ist coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in rerquired kproportion.This Ist coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth,which is further allowed to dry for 12 hrs.The final melamine polish is applieid with compressor pressure spray gun using melamine clear polish kand melamine thinneer mixed is required proportion complete as per direction of Engineer-in-charge.(Final coat to be done in 1 or 2 layers without gap of time)

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood

Providing and applying fibre reinforced elastomeric liquid wataer proofing membrane with resilent acryliic polymers having Sun Reflectivity Index(SRI) of 105 on top of concrete roof in three coats @ 10.76ltre/10sqm one coat of self priming of elastomeric waterproofing liquid(dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid(dry film thickness of complete aplication/system not less than 500 microns).The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particies with wire brushes,complete in all respect as per the direction of Engineer-in-charge.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

Brick lead 8K.M(1K+7P)

Providing and fixing 30 mm Flush door of Ply Wood Century of ISI Mark water Proof ply grade and pasting with 4mm Veneer of Green Décor make at Both side with all meterial and labour all complete (Including all Fancy Type fitting) as per building specification and Direction of E/I

Supply of conference table praelam particle Board(both sides) Table Top metal understructure (DTS/175) product id:5116877-65383143715 as per building specification and instruction of E/I.

Providing and fixing of 24 mm thick WPC Louver made of aluminium channel(38*25mm) with cleat angle(50*50*5mm thick)necessary hardware,supply and fixing of WPC Louver including all necessary frame kwork & complete in all respect.The surface will be kfurnished with on side WPC materials & service casting on reverse side cast of scaffolding and ktaxes all complete as per building specification & direction of E/I.

Providing & fixing chaukhats panneling with wooden framed by 12mm thck both side best quality ply and 4mm Veneer Green Décor pasting,finishing with all materials and labour all complete job as per building specification and direction of E/I.

S/F/F all height wall panneling of 12mm thick ply wood over50mmx25mm aluminium section, veener finish with all accessories all complete inclouding all complete job as per building specification and direction of E/I

Supping fitting fixing all height wall panelling with 12mm ply wood over 50mm x 25mm aluminum sector 24mm WPC Wall Lauver with all meterial and labour all Complete as per building specification and instruction of E/I

S/F/F all height wall panneling of 12mm x9mm thick ply wood over50mmx25mm aluminium section, 1.5mm thick laminate finished with all accessories all complete inclouding all complete job as per building specification and direction of E/I

Supplying fitting & fixing of 2 Feet Deep cuupboard/wardrobs with 19mm thick BWP grade marine ply as per IS 710 of approved brand kand stick to both side 1.5mm thick decorative laminated including all cost of materials,labour,taxes all complete as per building specification and direction of E/I.

Supplying fitting and fixing of Modular work stations in Raectangular cluster with all materials &labouur of approved design as per building specification and direction of E/I. with three seater plus shape cluster with curvilenear top(Modular work staions-GLAM DÉCOR-1) PRODUCT ID: 5116877-96317499527)

Supplying fitting and fixing of Modular work stations in Raectangular cluster with all materials &labouur of approved design as per building specification and direction of E/I. with four seater plus shape cluster with curvilenear top(Modular work staions-GLAM DÉCOR-1) PRODUCT ID: 5116877-38589798234)

supplying fitting and fixing printed wall paper of approved design as per direction of E/I. inclouding cost of wall paper,adhesive,labour and scaffolding all complete as per direction of E/I.

Supplying fitting and fixing Roller Blind curtain of approved brand and shade including all complete job as per direction of E/I.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)