PROVISION OF CHAIN LINK FENCING AROUND BASKET BALL COURT AT 31 WING AF UNDER GE (AF) PANAGARH

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed.

M&L for PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in sub base, foundation filling and mass concrete complete all as specified and directed.

S&F for mild steel posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. (Note :- Size of angle shall be as per standard mes approved TD drawings as provided by the Engineer-in-Charge at the time of execution of work)

S&F for PVC coated galvanised iron chain link fencing with minimum 4mm dia and PVC coated to achive outer dia not less than 5mm in required approved colour and shade in wire mesh of size 50mm x 50mm (as per sample approved by GE) fixed with nuts, bolts, and washers with flat iron complete all as specified and directed.

S&F of MS screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other or screwed both ends, each screwed end to be fixing with washer and one hexagonal or square nut n exc 5cm long and dia shank 5 to 10mm etc. complete all as specified and directed.

S&F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and also fastening conforming to Fe-410-W Gde E-250 complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for laying of cable and foundation of poles and stays and n. exc 10sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm (soil) thickness all as specified and directed.

Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for brick work using fly ash bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15 mm thick on concrete/brick surface on wall in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

M&L for hard core (broken stone) of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick watered and well rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregates) as in sub base to receive tiles complete all as specified and as directed. (Note: PCC work shall be required for tiling works.)

M&L for non skid heavy duty vitrified outdoor (designer) tiles of size 300mmx 300mmX10mm to 12mm thick as in floors etc jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles over 15mm thick screed in CM (1:4) complete all as specified and directed.

ROY ENTERPRISE (BID ID -3155544)

A.R. ENTERPRISE (BID ID -3150101)

CLASSIC CONSTRUCTION AND SUPPLIERS (BID ID -3150587)

SARASWATI ENTERPRISE (INDEX NO CEEC D-81) (BID ID -3150199)