Construction of New Rural Police Station building for Law Order with development works at Denkanikottai in Krishnagiri District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.2 : Earth work excavation in all soils (excluding refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6: Supply and Filling of 40mm HBSJ

2.7: Supply and Filling of 20mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3 : Supply and planting avenue trees

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

53.3 : S & F of C.I. Steps ( 5 kg)

Electrical arrangements 69 : S & F of 15 Amp. Power plug

72 : S & F of Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : S & L of 8 SWG wire

78 : Providing Earthing Station IS3043 (Type I)

81 : Meter Cupboard

86 : Anti termite treatment

ANNEXURE-I 2.1.1 : Supplying and filling Gravel (including Tax collected by Government per Cum)

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Stilt / Ground Floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.5.1 : Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 110 mm tk (B.P.) (using crushed stone sand) with admixture a. In Foundation and basement

b. In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

11.5.1: Brick Partition work in C.M. 1:4 Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 70 mm tk (B.P.) (using crushed stone sand) with admixture a. In Ground floor

b. In First Floor

c. In Second Floor

14.1.2.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & basement

18.1 : Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.For Vertical wall

e. Circular column

f. Curved surface

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 750mm x 2100mm (Single Leaf)

b) Door size 900mm x 2100mm (Single Leaf)

c) Door size 1000mm x 2100mm (Single Leaf)

d) Door size 1200mm x 2100mm (Single Leaf)

21.6.1 : R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using standardised concrete mix M20 grade. (using crushed stone sand) a. 750 x 2100mm

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

23.5: Supply and Fixing of MS Door (for lockup door) a) MS Door of Size 1000 X 2100mm

24.1.1 : Supply and Fixing of MS ventilator of size (for lockup ) a) MS Ventilator of size 1200 X 600mm

b) MS Ventilator of size 900 X 600mm

c) MS Ventilator of size 600 X 600mm

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) with plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) with plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) with plasticizer

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) with plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M20)

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5 : PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.5.1 : Gully Trap using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

71.2: Supply and fixing of 32 amps triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection and earth connection cost of all materials etc., all complete and as directed by the departmental officers.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.8 : Run of 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.1: Supplying and delivery of Three phase ELCB/RCCB

98.5.4: TW Panelled door shutter with brass fittings (Double leaf) a. 1800mm x 2100mm.

112.1 : S&F of 225 mm dia sweep AC exhaust fan

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1: Vitrified Tiles flooring (ivory) incl. pointing (using crushed stone sand)

367: Providing wooden (melamine) polish for new wood

379.5.1 : S&F of Granite Tiles - (Superfine Polished with Machine Cut Edges) of size 2'0 x 1'0 or 1'0 x 1'0 or 1'0 x 0'6 of 10 mm thick (Ruby Red) (using crushed stone sand) a.In Ground floor

ANNEXURE-II: A1: Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.

A2: Supplying and fixing in position of colour galvalume sheet of 0.47mm thick as ridge piece inclusive of overlap length labour charges and nuts, bolts etc., all complete and as directed by the departmental officers. (the quality and the brand of material should be got approved by the executive engineer before use)

A3: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free.

A4: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free.

A5: Providing teakwood glazed french window shutters and 5.5mm thick ground or frosted glass for panels including labour charges and cost of furniture fittings as per schedule ‘E' and directed by the departmental officers. a) 1000mm x 2100mm

A6: Supply & Fixing of WPC solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Bulk Density 800 Grms / Cub.Mt.. The frame shall be fixed onto the wall using 8 x 100mm long M.S fastener Screw fitted with polymeric nylon sleeve. A minimum of 4nos screws to be provided for each vertical member.Supply & Fixing of 25mm (+/- 1mm) thick Qute WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is designed homogeneously by Smooth Routing and 3D embossed grains on one side. The other side of the door shutter shall be plain mat finish. The door must be completely made by machine, without any post-production fabrication. The Solid WPC board shall have minimum Bulk Density 650 KG/ Cub.Mt. The door is suggested to be hinged to the frame with minimum of 5 inch butt hinges of SS make.

A7: Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

A8: Supply and installation of two-track sliding UPVC windows shall utilize UPVC profile sections with an outer wall thickness of 2.30mm (±0.2mm), featuring an outer frame of 60mm x 52mm, a shutter of 66mm x 42mm x 50mm, an interlock of 45mm x 36mm, and a glazing bead of 24.5mm x 16mm. All frame, sash, and mullion profiles shall be reinforced, where required, with a 1mm thick GI steel section, and windows are to be equipped with security devices such as touch locks or crescent locks, nylon rollers, and an aluminium track, all compliant with relevant specifications and departmental directives. Glazing shall consist of 5mm thick Plain or Pinhead glass, secured by TPE (Grey) weather-sealed gaskets, while all corners and mullion joints of the frame and sash shall be mitred cut and fusion welded without mechanical joints, with all welded joints neatly trimmed to a grooved nib finish, ensuring sharpedge- free products. The complete window units shall be fixed into pre-finished openings by drilling and fastening through the outer frame with highquality fasteners, and silicon sealant shall be applied to fill the gap between the wall and window frame for a leak-proof installation and complete finish etc., Complete and as directed by the department officers.

A9: Providing Wallputty (One coat) for newly plastered surface

A10: Supplying and fixing of following size of Aluminium Dye casting letters with MRF Powder Coating including labour charges for fixing in position cost and conveyance of all materials, T.W plugs, screws metal paste and labour charges etc.,. a) 12" size Aluminium Dye casting letters

A11: Supplying and fixing of Plastic name board of size 20"x5" with Stikness cut in computer to the depth including cost & fixing charges etc., all complete

A12: Supplying and fixing of 1x1/2 feet Police Vinyl Round Logo including cost of logo and fixing charges etc., all complete and as directed by the departmental officers.

A13: Supplying and fixing of 24" height Aluminium TNPHC Emblem including cost of emblem and labour charges for fixing with necesssary Scaffolding etc., all complete and as directed by the departmental officers.

A14: Supplying and fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A15: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A16: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A17: Supplying and fixing of 30W LED Street light with necessary fittings (Superior variety) Charges for fixing 30W LED lamp street light fittings

A18: Supplying and fixing 3 Nos 100 Amps 500 volts grade/ well porcelin fuse unit on suitable teak wood plank

A19: Drilling of 150mm dia Vertical in bores in hard rock area to the required deptph as directed by the departmental officers including labour charges for inserting casing pipe assembling in the drilled holes including pasting the jointing with solvent cement if necessary grouting the casing pipes etc., and including transport charges of drilling rig and supporting vehicles from one place to another etc., all complete a) Up to 150m below Ground Level

b) From 151m up to 180m

c) From 181m up to 210m

d) From 211m up to 240m

e) From 241m up to 270m

f) From 271m up to 300m

A20: Supply and delivery of 150mm of PVC casing pipes (6kg/cm²) as per IS 12818 /1992 of approved quality for borewells with average wall thickness of 6.1mm and inner/outer threaded ends in standard length of 3m including transporting charges to site of work and all other taxes etc., all complete as directed by the departmental officers. (The PVC casing pipe should be got approved from the EE before use )

A21: Supply and fixing of PVC 160mm dia top end cap of approved make 6.1mm thick with inner thread etc., all complete as directed by the departmental officers.

A22: Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by ‘V’ notch method.

A23: Supply and delivery of 12mm dia Nylon Rope for Bore-well including cost of materials and labour charges etc., complete as directed by the departmental officers.

A24: Supply and fixing of 150mm MS Bore Clamp set with ISI mark including labour charges for fixing etc., all complete as directed by the departmental officers.

A25: Supplying and delivery of wet type lubricated 3 HP submersible motor with multistage pumpset. As per ISI specification. The pumpset is suitable for AC three phase electric power the pumpset is suitable for Bore well etc., all complete and as directed by the departmental officers. Motor: 2.2 KW / HP, 415 Volts, 50HZ, 50 Stage, Depth of Borewell: 292m, Yield of the bore well: 2", Total head: 132-356m, Discharge: 72/24 lpm, Delivery size: 40mm, (TEXMO)

A26: Supply and delivery of 1 HP Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. Duty - LPM X M - 50 X 40

A27: THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). Upto 5 HP

A28: Labour charges for the erection of submersible pumpset in borewell / openwell including fixing and jointing submersible cable with proper clamps upto the starter. Upto 5 HP

A29: Supplying and laying of 3 core 4 sqmm 1100V grade copper UG flat cable of best and approved quality having ISI mark etc., all complete.

A30: Supplying and delivery of following dia "U" PVC pipe with ISI mark etc., all complete. a) 32mm dia UPVC column pipe

A31: Supplying, laying, fixing and jointing the following PVC pipe as per ASTM-D-1785 of schedule 40 including cost of materials and labour charges for laying, jointing and cost of conveyance charges with necessary specials etc., all complete and as directed by the departmental officers. a) 32mm dia PVC pipe

A32: Supplying and laying of GI pipe "B" class with ISI mark for Below ground level including cost of Earth work excavation and refilling ,labour charges, etc complete, all complete and as directed by the departmental officers a) 40mm dia GI 'B' class pipe

A33: Supplying and laying of GI pipe "B" class with ISI mark for above ground level including cost of clamping and labour charges, fixing GI pipes etc complete, all complete and as directed by the departmental officers. a) 50mm dia GI pipe "B" class

b) 40mm dia GI pipe "B" class

A34: Supplying and fixing of 32 mm dia Heavy PVC pipe including all specials for casing pipes for 4.0 sq mm submersible flat cable etc., all complete and as directed by the departmental officers.

A35: Supplying and delivery of following dia PVC pipe with ISI mark etc., all complete and as directed by the departmental officers. a) 50mm dia PVC pipe 10 Kg/cm²

b) 40mm dia PVC pipe 10 Kg/cm²

A36: Supplying, laying and fixing and delivery of following dia GI, GM, CI, PVC, UPVC and MS specials of best and approved quality having ISI mark etc., all complete. a) 32mm dia GI Bend

b) 32mm dia GI Hex Nipple

c) 32mm dia GI Union

d) 50mm dia Gun Metal Gate valve

e) 32mm dia Gun Metal Gate valve

f) 25mm dia Gun Metal Gate valve

g) 50mm dia GI Bend

h) 50mm dia GI Union

i) 50mm dia GI Hex Nipple

j) 50mm dia CI Foot Valve with stainer

k) 40mm dia GI Bend

l) 40mm dia GI Union

m) 40mm dia GI Tee

n) 50mm dia Gun Metal Non-Return valve

o) Supplying of 40mm dia Cast Iron Adopter

p) 40mmx32mm dia GI Reducer

q) 50mm dia PVC Coupling

r) 50mm dia PVC Tee

s) 50x40mm dia PVC Reducer

t) 40mmx32mm dia PVC Reducer

u) 50mm dia PVC Elbow

v) 40mm dia PVC Coupling

w) 40mm dia PVC Elbow

x) 40mm dia PVC Tee

A37: Supplying and fixing of SFRC manhole Cover with frame of following size with locking arrangements including of all cost etc., all complete and as directed by the departmental officers. a) 600mm x 600mm

A38: Supplying and fixing of following dia MS pipe with 3.6mm thick including cost of all materials and all labour charges etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officer (The brand and quality should be got approved from EE before use).

A39: Supplying and fixing of 5W LED bulb Spot light fittings including cost of material and labour charges for fixing of light etc., all complete and as directed by the departmental officers. (The brand shall be got approved from the Executive Engineer before use)

A40: TPMCB DB with Metal Door Cover with IP42 Protection HIGHER END. Supplying and fixing of 4 ways 3 phase DB. No. of ways incomer MCB / Isolator - 4 No. of ways incomer ELCB / RCD - 4 No. of outgoings ways - 12 and Rotary switch with 3 nos Indicator lamps including interconnection wire in DB box etc., all complete and as diected by the departmental officers.

A41: Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40 A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Lower End

A42: Supply and fixing of following Miniature Circuit Breakers 240 V / 415V 50hz - AC supply suitable for both lighting and motor circuits - lower end with ISI mark etc., all complete and as directed by the departmental officers. a) Four Pole 63A, 10KA

b) Triple Pole 6A to 32A, 10KA

c) Double Pole 6A to 32A, 10KA

d) Single Pole 6A to 32A, 10KA

A43: Supplying and delivery of following PVC armoued LTUG cable with ISI mark. a) 3.5 core 25 sq.mm. PVC Armoured UG Cable

A44: Labour Charges for conveying and fixing of UG Cable of Size of 4 to 95 Sq.mm and 2, 3, 3.5, 4 core with necessary MS clamps and brass screws including cost of materials and redoing the dismantled portion in to the original position etc., all complete and fixing of UG cables on walls and ceiling etc., all complete and as directed by the departmental officers. (Above G.L)

A45: Labour charges for conveying and laying of UG cables in the cable trench including earth work and providing sand cushion with brick layers below ground level etc., complete for UG cable of size 4 to 95 Sq.mm and 2, 3, 3.5, 4 core with ISI Mark etc., all complete and as directed by the departmental officers.

A46: Supply & fixing of Brass Cable gland suitable for following PVC armoured LTUG cable etc., all complete. a) Cable gland suitable for 3.5 core 25 sq.mm. UG Cable

A47: Supply & fixing of Crimping lugs suitable for following PVC armoured LTUG cable a) Crimping lugs suitable for 3.5 core 25 sq.mm. UG Cable

A48: Construction of Leach pit arrangements including cost of earth work, RCC Ring - 2 Nos, filling 40mm & 20mm size metal with required depth and top cover slab and labour charges etc., all complete and as directed by the departmental officers.