Loading
Loading…
Loading…
Tender Value
₹2.4 Cr
EMD Value
₹4.7 L
Closing Date
30 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
+ Capital Works)
Above/Below/Par
SRDSTEC
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' which ever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years,ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange,incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
24 conditions · 16 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Covering letter duly filled by the tenderer to be submitted on their letter head as per Annexure-I of Tender Document.
A copy of Authorization/Power of Attorney issued by the sole proprietor/partnership firm/LLP/ Society/JV/Company in favour of the individual to sign the tender on behalf of the sole proprietor/partnership firm/LLP/Society/JV/company as per clause no. 14 part -l of Tender Document. In case of company power of attorney must be backed by the resolution of Board of Directors and create liability against the company.
Details of Plant and Machinery already available with the firm must be uploaded.
List of engineers/personnel already available/ proposed to be employed for deployment on this work must be uploaded.
Details of Beneficiary for Electronic Transfer of Funds must be uploaded.
An undertaking by sole proprietor firm/all partners of the partnership firm/Power of attorney holder if company (as per Annexure-B/C uploaded with Tender Document )or LLP or Society/JV that he/they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 (Part-II) of the General Conditions of Contract (as per Annexure-B/C uploaded with Tender Document). (Detail instructions/condition may be seen on Tender Document)
Please submit the copy of the registration certificate of firm, PAN, GSTIN (if applicable)etc.
Tenderes are compulsorily required to upload undertaking (attached as Annexure-A uploaded with Tender Document) regarding Employment /Partnership of Retired Railway Employees attached as Annexure'A'. Otherwise the tenderer will give full information as to the date of retirement of such Engineer or gazetted officer from the said service and as to whether permission for taking such contract, or if the Contractor be a partnership firm or an incorporated company, to become a partner or director as the case may be, has been obtained by the tenderer or the Engineer or officer, as the case may be from the President of India or any officer, duly authorized by him in this behalf, shall be clearly stated in writing at the time of submitting the tender. Note:- Tenders without undertaking or required information shall be summarily REJECTED.
The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership firm/Company/Joint Venture (JV) /Registered Society/ Registered Trust/HUF etc. The Tenderer (s) who is/ are constituents of firm, company, Association or Society shall enclose self-attested copies of the constitution of their concern, Partnership Deed, copy of PAN Card and Power of Attorney along with their tender. Tender Documents in such cases shall to be signed by such persons as may be legally competent to sign themon behalf of the firm, Company, Association, Trust or Society, as the case may be. Following documents shall be submitted by the tenderer: (a)Sole proprietor Firm: (i) Affidavit of sole proprietorship firm. (ii) All documents in terms of explanatory notes in clause 14.0 PART-I of Tender Document (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of explanatory notes in clause 14.0 PART-I of Tender Document. (c) Partnership firm, as per Tender Form-2 (Annexure-I) Para 14.10 PART-I of Tender Document: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) All other documents in terms of TENDER FORM -2 of Tender Document (d) Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association)/AOA (Articles of Association) of the company. (ii) A copy of Certificate of Incorporation. (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms of explanatory notes in clause 14 PART-I of Tender Document (e) Limited Liability Society: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation of LLP. (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender/MoU/JV on behalf of the LLP and create liability against the LLP. (iv) All other documents in terms of explanatory notes in clause 14 PART-I of Tender Document (f) Registered Society & Registered Trust: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society. (v) All other documents in terms of explanatory notes in clause 14 PART-I of Tender Document (g) Joint Venture: All documents as specified under Para 14 PART-I of Tender Document
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suomoto post tender letters of the tenders shall be treated as NULL & Void as per Para 4.6 of STD- 2022
This tender will govern under "Indian Railway Standard General Condition of contract - 2022 or latest. Tenderers are requested to read GCC and tender document very carefully before submitting their Bid.
Performance Guarantee- The successful bidder shall submit PG as per procedure Mentioned in para no.16.(4) of Tender Document in part II, The successful bidder shall submit the performance Guarantee(PG) amounting to 5% of the contract value.
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
Undertakings by Partnership Firm- In case the Letter of Acceptance (LOA) is issued to a partnership firm, the undertakings as per Para no. 18.10 of Tender Document in part - I shall be furnished by all the partners through a notarized affidavit, before signing of contract agreement.
As per Railway board letter No. 2018/CE-1/CT/4 dt. 17.10.2018 contractor shall mandatorily update the labour data on Railway Shramik kalyan portal on monthly basis. The detailed guidelines are given in Para no 55-C of Tender Document in PART-II.
Provision/Upgradation of Infrastructures at Eight Goods Shed over MB Division (SEO, AWP, DPR, BJO, DUB, IQB, RK, BEK).
01RT1-TELE-8-shed-MB-2025
01RT1-TELE-8-shed-MB-2025
Open
Works - General
12 Months
Moradabad, Uttar Pradesh
₹0
₹4.7 L
30 Jul 2026
8 Jul 2026
16 Jul 2026
157 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,37,42,567.62 | ||
| — | 8500.00 | — | — | ||
| Supply of OFC single mode 6 Fibre armoured cable as per attached specification in tender document part-III. Inspection by consignee. | — | — | — | 2,45,055 | |
| — | 5490.00 | — | — | ||
| Supply of STP CAT-6 Cable as per attached specification in tender document part-III. Inspection by consignee. | — | — | — | 1,31,869.8 | |
| — | 1110.00 | — | — | ||
| Supply of CAT6 UTP ETHERNET cable, Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 29,126.4 | |
| — | 12000.00 | — | — | ||
| Supply of HDPE Pipe of 40 mm dia as per RDSO spec. RDSO/SPN/TC/45/ 2013, Rev. 2.0 Amendment-1 & amendment- 2 or latest with end cap provided with each drum. Inspection by RITES. As per attached specification in tender document part-III. | — | — | — | 7,25,400 | |
| — | 12000.00 | — | — | ||
| Laying of HDPE duct in the trenches and in the protective works already provided including in HDD portion and supply pulling of Nylon rope through it at different places as per direction of engineer in charge or site engineer. As per attached specification in tender document part-III. | — | — | — | 87,720 | |
| — | 12000.00 | — | — | ||
| Drawing / Blowing of Optical Fiber Cable in PLB HDPE Duct. Inspection by site Engineer. As per attached specification in tender document part-III. | — | — | — | 1,39,200 | |
| — | 2270.00 | — | — | ||
| Boring & Trenchless cabling along with supply & insertion of self lubricated HDPE pipe as per IS 4984:2016 (PN 6) of 110mm outer dia with 6mm wall thickness in the bore for laying of Signaling / Telecom /Power cable under track/road/culvert etc. cable laying covered separately. Inspection by RITES for supply portion & for execution by site engineer. As per attached specification in tender document part-III. | — | — | — | 32,85,053.2 | |
| — | 1500.00 | — | — | ||
| Laying of Power cables in 1 inch PVC conduit pipe/casing caping with suitable clamping. (PVC conduit pipe/ Case Caping & other accessories are to be supplied by the contractor.). Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 59,100 | |
| — | 37000.00 | — | — | ||
| Laying of signaling / Telecom / Power cables of different sizes as per drg. No. (NR/S&T/CON/1.1/97) and as per cable route plan approved by railway and meggering of cable before and after its laying of all type of outdoor cables. Meggering to be done for each drum separately. Meggering sheets to be supplied and filled up by contractor and submitted to railway. Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 2,77,870 | |
| — | 38.00 | — | — | ||
| Supply Installation and commissioning of maintenance free earthing system which consists of supply of earthing kit-1 set consisting of (1) Earth Electrodes of copper clad steel alloy of 10 feet (3mts) long, 17mm dia and copper thickness of 250 microns- 1Nos. (II) RDSO approved Earth enhancing compound in 30 kg. Pack - 01 Nos. (III) Copper tape of 25mm x 6mm x 300mm with 99% purity - 02 Nos. and another of 25 mm x 6mm x 150mm to terminate on earth electrode. The earthing material shall be supplied as per RDSO specification RDSO/SPN/197/2008 or latest. Inspection by RDSO. As per attached specification in tender document part-III. | — | — | — | 5,23,902.96 | |
| — | 60.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of Full HD Fixed bullet type/Dome type IP colour camera along with suitable housing, mounting arrangements and all accessories required for fixing and as per RDSO Specification No. RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by RDSO. As per attached specification in tender document part-III. | — | — | — | 8,15,188.2 | |
| — | 16.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of 4K UHD Bullet Type IP Camera along with the mount. All the accessories and fixing materials including mount required for this installation are to be supplied by contractor within the same cost.as per RDSO Specification No RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by RDSO. As per attached specification in tender document part-III. | — | — | — | 7,14,847.52 | |
| — | 8.00 | — | — | ||
| Supply, installation, testing, wiring& commissioning of Full HD Resolution Large Format Display LED Monitor Screen Size 55"(inches) or larger as per RDSO Specification No RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by RDSO. As per attached specification in tender document part-III. | — | — | — | 5,16,070.56 | |
| — | 16.00 | — | — | ||
| Supply and installation of 8 TB surveillance Hard Disk(internal) used for NVR. Inspection by Consignee. As per attached specification in tender document part-III. | — | — | — | 2,38,232.16 | |
| — | 5.00 | — | — | ||
| Supply and Installation of 32 Channel 4K NVR with 4 HDD NVR supported of 10TB.Specification as per. RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 1,64,926.15 | |
| — | 2.00 | — | — | ||
| Supply of Server Hardware for Video Management and recording along with all accessories as per RDSO Specification No RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by RDSO. As per attached specification in tender document part-III. | — | — | — | 5,44,417.02 | |
| Installation, Testing & Commissioning of Server for Video Management and recording along with all accessories as per RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by site engineer. As per attached specification in tender document part-III. | — | 2.00 | — | — | |
| — | 16.00 | — | — | ||
| Supply, installation, testing, wiring & commissioning of Video Management & Recording software with license as per RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest(Per camera license means video management(Viewing) at multiple locations such as station, RPF post & server room by same license). Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 89,466.72 | |
| — | 1.00 | — | — | ||
| Installation, Testing, Wiring and Commissioning of 64Channel Network Video Recorder and 64 TB storage after RAID 5/6configuration. All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. Inspection by Site engineer. As per attached specification in tender document part-III. | — | — | — | 2,878.56 | |
| — | 1.00 | — | — | ||
| Supply of 64 Channel Network Video Recorder and 64 TB storage after RAID 5/6configuration with HDD[8 nos. of HDD capacity 8TB each], 2nos. ethernet complete with all other accessories as per RDSO spec. No:RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 1,67,763.47 | |
| — | 3.00 | — | — | ||
| Supply, Installation, testing, wiring& commissioning of PC Work station hardware as per clause No 11.0 of RDSO Specification No RDSO/SPN/TC/65/2021 Version 6.0or latest for viewing monitoring and system management with digital keyboard and loaded with GUI client software feature as per clause no18.2.0 of RDSO/SPN/TC/65/2021Version 6.0 or latest. Software licenses conditions as per clause No20.0 of RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by RDSO. As per attached specification in tender document part-III. | — | — | — | 6,12,856.47 | |
| — | 16.00 | — | — | ||
| Supply, installation, testing, wiring & commissioning of Video Analytic software with license as per RDSO Specification No RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. (Per camera license means video management(Viewing) at multiple locations such as station, RPF post & server room by same license). Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 1,57,338.24 | |
| — | 2.00 | — | — | ||
| Supply, Installation, testing, wiring& commissioning of external storage with (Hardware and Software) with minimum 240TB RAW usable storage capacity with all accessories as per clause 12.0 asper RDSO Specification No RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by RDSO. As per attached specification in tender document part-III. | — | — | — | 19,88,392.46 | |
| — | 8.00 | — | — | ||
| Supply, Installation, Testing &Commissioning of Aggregate Switch ( 24xG SFP ports and 4x10GSFP+ ports) as per RDSO Specification NoRDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by RDSO. As per attached specification in tender document part-III. | — | — | — | 6,54,900.48 | |
| — | 26.00 | — | — | ||
| Supply of single mode single fibre 10G SFP+ module compatible with Layer 3, Layer 2 and Aggregates witches. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 80,070.9 | |
| Installation, testing and commissioning of single mode single fibre 10G SFP module compatible with Layer 3, Layer 2 and Aggregate switches. Inspection by site engineer. As per attached specification in tender document part-III. | — | 12.00 | — | — | |
| — | 88.00 | — | — | ||
| Supply , installation and commissioning of SFP module 10/100/1000 mbps compitable with switch single mode 1310/1550 Fiber module single fibre with suitable patch cord. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 1,87,620.4 | |
| — | 29.00 | — | — | ||
| Supply, installation, testing and commissioning of Media Converter fiber to Ethernet 100 base T Signal mode fiber with all required accessories fiber including AC 230 V to DC Power adapter, as per Clause No. 16 of RDSO Spec. RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 1,73,848.91 | |
| — | 6.00 | — | — | ||
| Supply of 2Mbps Modems G.703 (E1) at carrier end and V.35 at DTE end complying RDSO SPECIFICATION NO. RDSO/SPN/TC/80/2020 Revision 2.0. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 71,778.6 | |
| — | 4000.00 | — | — | ||
| Supply of 3 Core x 2.5 Sq mm multistrand copper conductor, PVC insulated, armoured power cable confirming to IS:694 part I as per RDSO specification No.RDSO/SPN/TC/65/2021 Ver. 6.0 Amdt. 1, 2 & 3 or latest. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 3,06,080 | |
| — | 2.00 | — | — | ||
| Supply, Installation, testing & Commissioning of UPS (online) 5KVA as per technical specifications attached in tender document. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 2,36,775.36 | |
| — | 2.00 | — | — | ||
| supply of online UPS of Rating 2.0 KVA. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 98,000 | |
| — | 6.00 | — | — | ||
| Supply, Installation, testing & commissioning of UPS (online) 3 KVA as per attached specification in tender document part-III. Inspection by consignee. | — | — | — | 4,25,786.1 | |
| — | 7.00 | — | — | ||
| Supply and installation of 19" 42U Rack with all accessories like Electrical fitting, Fan tray, Patch Panel, cable manager, SPD for housing IP storage unit. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 2,35,040.96 | |
| — | 500.00 | — | — | ||
| Cutting of platform surface Tile/slab) for a depth of 25cm and a width of 10cm and refilling/reconditioning/concreting/repairing the platform after laying HDPE pipe and cable. Cutting should be done with marble cutting machine in proper manner and restore the same as before in such a manner that aesthetic of the platform is not distrurbed. Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 78,545 | |
| — | 1650.00 | — | — | ||
| Excavation of cable trench at platform/concreted surface of 120 mm wide &300 mm deep with marble cutting machine as per approved cable plan at place where cess formation width does not allow, standard width/depth of trench to be dug for safety reason .Restoring surface to normal condition as prior to trenching required material will be supplied by the contractor according to excavated surface. Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 2,83,998 | |
| — | 30.00 | — | — | ||
| Supply of 6U Outdoor cabinate enclosure IP66 complied pole mount similar to Rackom 6U IP66 or similar. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 2,19,013.5 | |
| — | 2.00 | — | — | ||
| Supply and Installation of surface Wall mountable type 19 inch 6Unetwork Rack with front glass door with lock and rack fixing multipoint AC Power trip & all accessories. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 7,364.16 | |
| — | 5.00 | — | — | ||
| Supply Wall Mount 19" 6U Rack, as per attached specification in tender document part-III. Inspection by consignee. | — | — | — | 21,442.05 | |
| — | 26.00 | — | — | ||
| Installation, Testing & Commissioning of19" 6U Rack. All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 1,603.42 | |
| — | 8.00 | — | — | ||
| Preparation of drawing mentioning the location of cameras wiring diadrams showing clearly the STP/CAT-6, OFC, Power cable OTDR test reports of OFC cable, earth resistance test reports, technical details of servers, switches, workstations, media convertors, storages and submission in soft as well 3sets in printed to the consignee. Adiagram of camera location either inpictorial view or in descriptive manner as decided by the officer incharge should be prepared on asuitable sheet and displayed in CCTV control room. Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 1,71,007.52 | |
| — | 5190.00 | — | — | ||
| Supply of PVC Conduit Pipe of 25 mm dia ISI marked heavy (HMS)series as per IS: 9537part-III - 1983 standards or latest. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 1,18,435.8 | |
| — | 5190.00 | — | — | ||
| Laying & Fixing of conduit 25mm (conduit Pipe must be fixed with clamp at the interval of 300mm)/HDPE/GI/RCC Pipe. Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 1,02,398.7 | |
| — | 2220.00 | — | — | ||
| Laying of UTP/OFC/CAT-6 cables in1 inch PVC conduit pipe/casing caping with suitable clamping. (PVC conduit pipe/ Case Caping & other accessories are to be supplied by the contractor.). Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 82,428.6 | |
| — | 5550.00 | — | — | ||
| Laying of OFC Cable/STP Cable/Power Cable in conduit pipe/pvc channel. Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 55,389 | |
| — | 985.00 | — | — | ||
| SPLICING/DROPPING/TERMINATION of each fiber/pigtail in the LIU/IOBOX/TERMINAL JOINTS through fusion splicing of termination of OFC cables. The fibers terminated shall be tested and test report (Hardcopy and soft copy) shall be submitted to the Railway site incharge for records. Each fiber shall be properly marked with necessary ferrules/tags. Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 1,57,865.95 | |
| — | 10.00 | — | — | ||
| Supply of 2 Mbps Router, 2 LAN/4WAN port, 230V AC operated, asper RDSO spec. RDSO/SPN/TC/84/2008 Rev. 0 or latest, along with connecting cables, connectors etc. Inspection by RITES. As per attached specification in tender document part-III. | — | — | — | 6,22,330.2 | |
| — | 21.00 | — | — | ||
| Supply and installation of FMS (12 F) rack mountable single mode with splicing and termination of OFC cables with all accessories (Pig tail and other materials required for work to be supplied by contractor. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 76,073.13 | |
| — | 31.00 | — | — | ||
| Supply, installation and complete wiring of optical fibre cable termination box for 6 fibres complete with base housing, base mountings with fixing arrangement etc. & splicing of fibre with low loss of pigtail cables. Splice losses in no case should be more than 0.1 dB. Necessary 0dB connectors should be provided in OFC termination box. Payment Terms:100% after execution. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 1,09,351.57 | |
| — | 3.00 | — | — | ||
| Supply and installation of optical fiber cable joint enclosure as per TEC Spec.no.GR/OJC-02/01/March 99 with latest amendment and splicing of optical fiber cables (24 Fibre and testing). This includes provision of joint pit (RCC/Prefabricated) as dectalled in the technical specifications and as advised by Engineer at site. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 53,948.94 | |
| — | 2.00 | — | — | ||
| Supply and installation of FMS (24 F) rack mountable single mode with Suitable type with splicing and termination of OFC cables with all accessories (Pig tail and other materials required for work to be supplied by contractor ). Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 11,924.2 | |
| — | 182.00 | — | — | ||
| Supply of OFC jumper (patch chord)(10 mtr long) with FC/PC & SC or suitable connector at both end as per RDSO/SPN/TC/69/2007 Rev.0 or latest. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 1,02,373.18 | |
| — | 176.00 | — | — | ||
| Supply & Installation of Patch cord RJ- 45 (3Mtr.). Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 38,093.44 | |
| — | 17.00 | — | — | ||
| Supply, installation, testing and commissioning of 24 port b10/100/1000 Mbps smart- managed POE switch with 4 SFP ports as per RDSO/SPN/TC/83/2020 Rev. 2.0 or latest. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 3,26,139.9 | |
| — | 65.00 | — | — | ||
| Supply of Smart Managed 8 Port POE switch supports 1Gbps or more speed with 2 SFP Uplink Ports . RDSO Specs. No.RDSO/SPN/TC/65/ 2021 Ver.6.0 with Latest amendments. Inspection by RDSO. As per attached specification in tender document part-III. | — | — | — | 6,37,937.95 | |
| — | 13.00 | — | — | ||
| Supply of Wireless Keyboard with Mouse. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 18,531.5 | |
| — | 17.00 | — | — | ||
| Supply and installation of 9U Rack Enclosures Networking/Server Rack. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 1,12,738.73 | |
| — | 18600.00 | — | — | ||
| Excavating & refilling of trench in normal soil to the level of ground with rammed earth asper Drg. NO.(NR/S&T/Con/1-1/97) so as not form a drain,0.3 Mts wide & 1 Mts deep on both side of the station along the track. It shall confirm to the safe distance as per signaling &cable route plan in all type of soil, it also includes clearance of roots of trees & bushes. Lesser depth due to site condition shall be paid proportionately, after being decided in writing by engineer not below the rank of JAG. Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 15,13,482 | |
| — | 40.00 | — | — | ||
| Supply & erection of 15 feet GI pipe of 4" diameter of medium quality ISI No.1230 (Part1) 1990. Having iron base plate 10mm thick 30 cmx 30 cm welded at the bottom of pipe with 4 supports of iron bars of size 10 mm dia. The 3 feet shall be buried in the ground and 12 feet shall be above the ground. the work includes digging of pit on platform, laying of cable in between poles in suitable under gorund G.I. pipes, erection of pole and filling the pit with 1:3:4 cement, concrete and sand. final plastering should be done on the surface. The iron bracket on the top of the pole shall be provided to fix the CCTV camera and junction box/6U outdoor cabinet etc.( Necessary fixing and other materials required for fixing should be borne by the contractor). The work includes supply of all the material required in this item. Inspection by consignee for supply portion. As per attached specification in tender document part-III. | — | — | — | 1,33,430.4 | |
| — | 24.00 | — | — | ||
| Supply of G.703 & V.35 converts V.35 electrical signals into optical data stream for transport over single mode or multimode fiber optic cables or similar specification Optical Modem. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 4,60,908 | |
| — | 160000.00 | — | — | ||
| Supply and laying of 2nd class bricks in the trench and laying as per drg.No. (NR/S&T/CON/1.5/97) as per Instructions of the site Engineer. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 12,09,600 | |
| — | 6.00 | — | — | ||
| Supply of Remote Fault Remote Diagnostic System with minimum specification -Intel i7 [up to 4.7 GHz]10 Cores and 12 MB Cache, Windows OS latest, MS office professional latest, RAM- 16 GB DDR4, Storage- 1TB SSD, Screen- 14inches. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 5,16,403.26 | |
| — | 4.00 | — | — | ||
| Supply and installation of Rack Mounted Fiber Management System as per Generic requirement GR NoG /FDM-01/02 April-2007 of TEC with all installation material, splicing, termination and testing of2 x 24 fiber of cable with all connectors and any other material required as per instructions of Railway Engineer's Representative at site. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 92,227.96 | |
| — | 20.00 | — | — | ||
| Supply of single app. case steel RE with 'E' type lock and key ward no.42 and handle as per drg. No. RE/S&T/ALD/SK/219/82 with (Alt A) and 221/82 with Alt.B. Inspection : RITES. As per attached specification in tender document part-III. | — | — | — | 4,36,904.4 | |
| — | 500.00 | — | — | ||
| Termination of all the cores of all type of outdoor cable after its laying on both end. This also includes preparation of test report for core to core & core to earth on prescribed Performa for each core of the cable separately. This also includes dressing & lacing of cables on both ends. Performa for testing & material for lacing to be supplied by the contractor. Inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 5,900 | |
| — | 14.00 | — | — | ||
| Casting, concreting and curing of foundation and erection of App. Cases (Single) as per drg. No.(NR/S&T/D&D/02/2024). All materials such as cement, sand, aggregate and anchor bolts shall be supplied by the contractor. App. Case single will be supplied by railway. Contractor is required to execute all type of repair works of foundations if required during inserting the cable for termination. inspection by site engineer. As per attached specification in tender document part-III. | — | — | — | 69,883.38 | |
| — | 8.00 | — | — | ||
| Supply of apparatus case steel RE half with E type lock and key ward no.42 and handle as per drg.no. RE/S&T/ALD/SK/220/82 with Alt.B and 221/82 with Alt.B. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 1,26,963.84 | |
| for details. | Breakup | — | — | ||
| Preparation & fixing of bakelite hylum sheet 910x800x6mm and teak wooden shelf 900x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location boxes secured by nuts and bolts.This includes fixing of fuses, ARA terminal shelf type Q series relays and other type relays on square bars fixing and jamming of cables with 2 inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in the hole drilled separately for each cable through the salwood plank and all cable entry points on location boxes, location huts, JBs relay room/battery room to be closed with suitable masonry works covered with sand and plastering.Wiring description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including hard wood shelf, hylum board, salwood plank, angle iron square bar, wire and wiring material as per the IRS specn., non deteriorating type fuses with bases,catenary wires , nuts and bolts and other items shall be supplied by the contractor. Relays, ARA terminals only shall be supplied by the Railways. | — | — | — | 70,822.52 | |
| — | 700.00 | — | — | ||
| Supply of Terminal Block 25MM center M6 terminal made of PBT to RDSO Drg.no.SA23471 A (Alt-4) or latest as per RDSO specn. IRS-S-75/2006 (Rev 2) or latest., Inspection : RDSO. As per attached specification in tender document part-III. | — | — | — | 51,737 | |
| — | 22.00 | — | — | ||
| Conventional earth :- Supply and installation of earth electrodes as per std. practice. The item includes digging of pit in earth, 3 Mtrs. deep and fixing earth electrode pipe. Casting of cement concrete enclosures as per drg. No. (NR/S&T/CON/6.4/97). The soil treatement shall be done as per std. pratice. The item includes provn. of mild steel flat of size 35mm x 6mm (as per IRSEM) and nut bolted connection of MS flat with earth electrode. The other end of mild steel flat to be connected to block instrument, cable sheath of power equipment, signal base, apparatus case, CT rack / relay racks, other equipments as per the instruction of Engr. at site & IRSEM. Earhting connection location to location shall be done through cable which shall be provided by Railway. Complete materials such as earth electrodes as per drg. No. ( NR/S&T/CON/6. 3/97), cement, wiring material, nut bolt for connection & mild steel flat of size 35mm x 6mm or 210 sqm as per SEM etc. to be supplied by the contractor. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 58,009.16 | |
| — | 2.00 | — | — | ||
| Dismantling and releasing of Point eqpts. which includes all S&T fittings of electrical and mechanical, facing point lock/ hand plunger lock/ lock bar / holding bar/ EPD/ mechanical detecter/ Pt. machine with all attachments. All dismantelled material to be transported and stacked in the store of SSE/Sig/tele of MB div. | — | — | — | 2,428.46 | |
| — | 8.00 | — | — | ||
| Casting, concreting and curing of foundation and erection of half app.cases of size (670mmx760mm) and 650mm deep as per Drg.No.NR/S&T/CON/2. 8/97. A layer of 3 mm of bitumen compound has to be provided between foundation and location box to prevent ingress of water in the base of location box . All material such as cement,coarse sand,aggregate and anchor bolt shall be supplied by contractor . App. Case half will be supplied by Railway. Contractor is required to execute all type of repair works of foundations if required during inserting the cable for termination. Inspection by site engineer. | — | — | — | 36,694.88 | |
| — | 8.00 | — | — | ||
| Preparation and fixing of bakelite hylum sheet 450x800x6mm and teak wooden shelf 450x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location box secured by nuts and bolts. This includes fixing of fuse ARA terminal, shelf type Q series relays and other type of relays on square bars, fixing and jamming of cable with 2 inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in the hole drilled separately for each cable through the salwood plank and all cable entry points on location boxes, location huts, JBs relay room/battery room to be closed with suitable masonry works covered with sand and plastering.Wiring description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including hard wood shelf, hylum board, salwood plank, angle iron square bar, wire and wiring material as per the IRS specn., non deteriorating type fuses with bases,catenary wires , nuts and bolts and other items shall be supplied by the contractor. Relays,ARA terminals only shall be supplied by the Railways. i)Preparation of App. Case half not involving wiring of relays. Inspection by site engineer. | — | — | — | 30,931.52 | |
| — | 4.00 | — | — | ||
| Supply of Digital insulation Tester (Megger) 100V/500V. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 23,458.16 | |
| — | 3.00 | — | — | ||
| Digital earth tester 4 Terminal, range 0-10/100 ohm with Ni-cd rechargeable battery with accessories kit and other required accessories TEC spec no.GR/TIE-10-April or latest. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 19,413.21 | |
| — | 1.00 | — | — | ||
| Supply of TDR Based cable fault locator for metallic cables Viz LV Power cable/ Control cables/Signaling cables fault location. Inspection by consignee. As per attached specification in tender document part-III. | — | — | — | 1,32,709.21 | |
| for details. | Breakup | — | — | ||
| Supply of disconnect terminal Wago or similar as per spec. no. RDSO/SPN/189/2004 Ver 3.0 or latest as below: Inspection by RDSO. As per attached specification in tender document part-III. | — | — | — | 24,403.8 | |
| — | 30.00 | — | — | ||
| Steel carrier Rail, 35x7.5mm, 1 mm/0.039 in thick, unslotted (1mtr length). Inspection by RDSO. As per attached specification in tender document part-III. | — | — | — | 4,447.5 | |
| — | 40.00 | — | — | ||
| Comprehensive Annual Maintenance Contract for Item no.(11, 12, 13, 14, 15, 16, 20, 21, 23, 24, 28, 31, 32, 33, 47, 54, 55 & 60) for Five years (5% annually after completion of warranty period ) | — | — | — | 13,24,697.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
8goodshed.pdf
ATTACHMENT
TenderDocument8Goodsshed14.07.2026.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .