SPECIAL REPAIRS TO BLDG NO P-80 AND P-81 AT JARAWA MT AND SPECIAL REPAIR TO PERIMETER WALL, MS RAILING NEAR NDV AND ODV UNDER AGE B/R-I OF GE HADDO, PORT BLAIR

Amount

M&L for Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth and getting out in soft / loose soil for foundation of poles (or) cable laying all as specified and directed.

M&L for rough excavation n exc. 1.5m deep and getting out in hard / dense soil complete all as specified and directed.

M&L For Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc not exceeding 10 sqm on plan and getting out in hard / dense soil etc all as specified and as directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm hard dense soil.

M&L for Removing excavated soil to a distance not exc 50 m and depositing where directed at a level n.exc, 1.5m above the starting point complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed

S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws as specified.

S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws as specified.

M&L for Aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering etc fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed

M&L for mild steel work as posts and struts in fencing including cutting tops as required drilling holes, notching for wires etc and similar works conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F mild steel Roof trusses (framed), trussed purlins, and fastening and heavy brackets framing (beam, tee, angle, channel or flats section) including distance pieces, cleat etc conforming to Fe-410 (Gde-E250) quality -A complete all as specified and as directed.

S & F framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290,Gde E-165 complete all as specified and as directed.

S & F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces over 10 cm in width or girth not otherwise described and complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint including preparation of old steel surfaces over 10 cm in width or girth not otherwise described and complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided, etc complete all as specified and as directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided, etc complete all as specified and as directed

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundation of posts, railing and similar work complete all as specified and directed

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

Demolition of cement concrete un-reinforced in ground floors and pavings not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete etc all as specified and as directed.

M&L for reinforced cement concrete (Design mix) M-30 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete (Design mix) M-30 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for reinforced cement concrete (Design mix) M-30 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L form work for rough finished flat surfaces to sides of concrete foundations, footings, bases of column, raft and raft beams, sides and soffits (if any) of foundation and plinth beam, vertical or to batter of flat surfaces complete all as specified and as directed.

M&L for fair finished Square, rectangular and polygonal form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for flat formwork to fair finished surface of concrete flat, side and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and directed

M&L for 75mm thick PCC 1:2:4 type B2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and directed

M&L for Machine cut Kota stone slab 20-25mm thick as in floors / treads of steps laid over and including 15mm thick cement screed base of CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting and polishing by machine incl rounding the edges and mirror polishing to give high gloss finish complete all as specified and directed

M&L for Machine cut Kota stone slab 20-25mm thick (single piece) as in riser of steps, skirting, dado and pillar over 10mm thick cement screed base of CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting and polishing by machine incl rounding the edges and mirror polishing to give high gloss finish complete all as specified and directed

M&L for broken glass coping on top of security wall in cement mortar 1:3 complete all as specified and directed

S & F for galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Demolition of precast cement concrete block walling built in CM or cement lime mortar complete all as specified and as directed.

M&L Precast cement concrete block masonry exc 10cm in width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:4) etc all as specified and as directed.

M&L for Rendering 10mm thick in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth without using extra cement etc all as specified and as directed.

M&L for preparation of newly plastered Internal wall surface and applying two coats of distemper oil emulsion over a coat of average 1mm thick wall care putty to make the surface smooth complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of average 1mm thick wall care putty to make the surface smooth after complete removal of existing treatment complete all as specified and as directed.

M&L for 15mm thick plaster in CM (1:4) on fair faces of brick walls or concrete surfaces including mixing of liquid water proofing compound 200ml per 50kg of cement bag, finished the surface even and smooth without using extra cement etc all as specified and as directed. (Note: Water proofing compound shall be measured and paid seperately)

M&L for preparation of surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for complete removal of existing treatment on plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and includig priming coat of exterior primer applied @ 0.90 litre / 10 Sqm complete all as specified and as directed.

M&L precast cement concrete louveres and jallies 40mm thick (measured solid), including all mouldings, type B0, 1:2:4 (using 12.5mm graded stone aggregate) and set in cement mortar 1:4 complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including crancking, bending spirally hooping for columns, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

M&L for Mild steel TMT bars 6mm to 8mm dia and over,cut to length, bent to shape requiried, including brancking, bending spirally hooping for columns, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in mortar all as specified and directed.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc.

Taking down fuse Unit/DBs 415 Volt/230 Volt

Taking down old aluminium sub main wiring of any size.

Taking down existing light fittings of any type any capacity complete all as directed.

M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including concealed with all fittings PVC conduits (Medium grade) of size not less than 20 mm dia including sunk pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover for mounting switches/ sockets/ regulators etc. complete as specified for :- Make of wire : Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC conduit : Modi/ Precision/ Supreme/ Finolex/ Polycab.

Description same as per Srl item No 51 above but One light/fan point controlled by one switch 5 Amps one way.

Description same as per Srl item No 51 above but, point wiring for 5 pin switch socket outlet , 6 Amps on independent board

Description same as per Srl item No 51 above but, point wiring for 5 pin switch socket outlet , 6 Amps on same board

All as per item No.51 above but point wiring with two single core 4.0 sqmm size PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket outlet and Geyser and one run of 4.0 Sqmm cable for earth in green colour on independent board.

S & F Switch piano , flush type, single pole one way 6 amps, 240 Volts complete all as specified and directed. Make : Anchor/Legrand/ Cona

S & F Switch piano , flush type, single pole one way 16 amps, 240 Volts complete all as specified and directed. Make : Anchor/Legrand/ Cona

S & F for socket outlet 2 in 1, 3 pin, 6 Amps, flush type, universal complete all as specified and directed. Make : Anchor/Legrand/ Cona

S & F for socket outlet 2 in 1, 3 pin, 6 & 16 Amps, flush type, universal complete all as specified and directed. Make : Anchor/Legrand/ Cona

M&L for ceiling rose, 3 phase, PVC/Polycarbonate, isolated body, complete all as specified and as directed.

Taking down old corroded GI bracket of 25mm dia and Supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building security light all as specified and directed

S& F 30 watts LED building security light fittings win peanuts leans IR 65 luminaire comprise of elegantly designed COB LED ensure efficient optics and uniform distribution of light for street light application. Pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with pranuts including necessary fixing arrangements as per site requirements class Make : Luker Cat Part No: LSTE-30 or equivalent to Philips /Havells

Supplying, fixing and testing tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make : Luker Cat Part No : LT5M20 or equivalent to CG/Philips /Havells

S & F Sub main wiring with PVC insulated cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red /Yellow/ Blue, Neutral- black and earth- green in and including rigid PVC conduit concealed in wall (ISI marked) incl all specials like joint elbow, Tee, junction, bend etc and provision of PVC insulated copper conductor single core 4.0 Sqmm for earth continuity all as directed. Make of wire :Gloster /Havells /Anchor /Polycab /Finolex and Make of PVC Conduit : Modi / Precision / Supreme / Finolex / Polycab Note : 3 runs of 4.0 sqmm cable alongwith PVC conduit shall be measured as one unit.

S & F Sub main wiring with PVC insulated cable 4 single core 6 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red /Yellow/ Blue, Neutral- black and earth- green in and including rigid PVC conduit concealed in wall (ISI marked) incl all specials like joint elbow, Tee, junction, bend etc and provision of PVC insulated copper conductor single core 4.0 Sqmm for earth continuity all as directed. Make of wire :Gloster /Havells /Anchor /Polycab /Finolex and Make of PVC Conduit : Modi / Precision / Supreme / Finolex / Polycab Note : 5 runs of 6.0 sqmm cable alongwith PVC conduit shall be measured as one unit.

S & F triple pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door TPN DB system 04 ways,including taking down old unserv DB of any type /rating and making good to the distrubed surface /walls. Make: Indo asian / Havells / L&T / Legrad

S & F SPN DB sheet metal enclosure double door IP -43 protection, 4 way with 200 Amps rated standard bus bar , of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed. Make:Indo Asian/Havells/L&T

S & F MCB TPN 63 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : Legrand/ Indo Asian/Havells/L&T

S & F MCB TPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : Legrand/ Indo Asian/Havells/L&T

Supplying & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make :Indo Asian /Havells/L&T

Supply & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make :Indo Asian /Havells/L&T

M & L Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement all as specified and as directed by Engineer-in- Charge.

Supply and laying/fixing in trenches, cable ducts ,clamping on wall or any place DWC HDPE pipe of size 50 mm(OD) x 38mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection all as specified and directed. Make:Rex Poly Extrusion Ltd/Tirupati Plastomatics Pvt Ltd.

Supply, laying,testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 25 Sqmm 4.0 core (laid on floor/Roof/wall in proper saddling all as specified and directed. Make Polycab/ Gloster/ Anchor/ Havells/ Finolex

M&L for cutting the road / footpath / hard standing etc for laying of pipe complete all as specified and directed.

Earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion.

V KARTHICK

CHANDER SEKER ENTERPRISE

CARTWHEEL CONSTRUCTION

M/s Ramesh Lal

M/s Prem Enterprise

LOOK UP ENTERPRISES

M/s K Moorthi

JD Construction