Auditorium Chair ( PAC Only ) Average Turn Over of Last 3 Years 94 Lakh (s) Experience with Gov. Required 3 Year (s) Auditorium Chair ( 200 ) ( Under PAC ) Make hr-miller Model hrmilleraudi-m-mico Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of Supply of auditorium chair Knocked Down To Be Assembled At Consignee Site By The Seller * Type of chair Floor mounted * SEAT Type of seat seat with auto tip up mechanism with push back feature * Seat rest assembly 12mm ±1mm thick flat plywood moulded with polyurethane foam and upholstered with 3-layer foam laminated fabric and injection moulded cover * 1/4 Seat under structure MS black powder coated understructure with integrated auto tip- up mechanism which folds the seat when not in use * Fixing of understructure to ground By anchors with washer and nut * seat width ±10mm 600 * seat depth ±10mm 460mm * Seat thickness(including cushion)±10mm 110mm * PU foam moulded with density±2Kg/CuM 45Kg/CuM * Upholstery fabric 3-layer foam laminated fabric * Shade of Upholstery fabrics Blue * BACKREST Type of backrest Rocking backrest up to 100mm * Backrest assembly made up Of 12mm ±1mm thick flat plywood upholstered with 3 layered foam laminated fabric and injection moulded back cover * Backrest width ±10mm 520m 520m Backrest height ±10mm 650mm 650mm Backrest thickness ±10mm 110 mm * PU foam moulded with density ±2mm 45Kg/CuM * Upholstery fabrics 3-Layer Foam Laminated Fabric * Shade of Upholstery fabric Blue * ARMREST Type of armrest One side(common for two chairs) * Armrest made up of Integral polyurethane foam with 65mm±10mm 'A' hardness and reinforced with MS insert fixed with leg * 2/4 frame Armrest cladding Metal structure * PU foam moulded with density ±2mm for Armrest 45Kg/CuM * Armrest width ±10mm 80mm * MISC Side panel/Aisle panel Made up of 2mm thick CR steel.each side panel is clad with two fabric upholstered particle board of 9mm thick * Leg frame assembly fabricated From MS tube 60mmX40mmX2mm thick welded with grouting member * Writing pad Without * Type of writing pad N.A * Number of bottom plates 2 Nos foundation plate of 120mm(W)X170mm( L)X5mm(T) HR steel * Rocking Spring Rocking coil spring steel conforming to IS:4454/Latest grade II tested for 500000 cycle * GENERAL DIMENSION Arms to arms inner width ±10mm 530 mm 500 mm

Auditorium Chair ( PAC Only ) Average Turn Over of Last 3 Years 94 Lakh (s) Experience with Gov. Required 3 Year (s) Auditorium Chair ( 200 ) ( Under PAC ) Make hr-miller Model hrmilleraudi-m-mico Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of Supply of auditorium chair Knocked Down To Be Assembled At Consignee Site By The Seller * Type of chair Floor mounted * SEAT Type of seat seat with auto tip up mechanism with push back feature * Seat rest assembly 12mm ±1mm thick flat plywood moulded with polyurethane foam and upholstered with 3-layer foam laminated fabric and injection moulded cover * 1/4 Seat under structure MS black powder coated understructure with integrated auto tip- up mechanism which folds the seat when not in use * Fixing of understructure to ground By anchors with washer and nut * seat width ±10mm 600 * seat depth ±10mm 460mm * Seat thickness(including cushion)±10mm 110mm * PU foam moulded with density±2Kg/CuM 45Kg/CuM * Upholstery fabric 3-layer foam laminated fabric * Shade of Upholstery fabrics Blue * BACKREST Type of backrest Rocking backrest up to 100mm * Backrest assembly made up Of 12mm ±1mm thick flat plywood upholstered with 3 layered foam laminated fabric and injection moulded back cover * Backrest width ±10mm 520m 520m Backrest height ±10mm 650mm 650mm Backrest thickness ±10mm 110 mm * PU foam moulded with density ±2mm 45Kg/CuM * Upholstery fabrics 3-Layer Foam Laminated Fabric * Shade of Upholstery fabric Blue * ARMREST Type of armrest One side(common for two chairs) * Armrest made up of Integral polyurethane foam with 65mm±10mm 'A' hardness and reinforced with MS insert fixed with leg * 2/4 frame Armrest cladding Metal structure * PU foam moulded with density ±2mm for Armrest 45Kg/CuM * Armrest width ±10mm 80mm * MISC Side panel/Aisle panel Made up of 2mm thick CR steel.each side panel is clad with two fabric upholstered particle board of 9mm thick * Leg frame assembly fabricated From MS tube 60mmX40mmX2mm thick welded with grouting member * Writing pad Without * Type of writing pad N.A * Number of bottom plates 2 Nos foundation plate of 120mm(W)X170mm( L)X5mm(T) HR steel * Rocking Spring Rocking coil spring steel conforming to IS:4454/Latest grade II tested for 500000 cycle * GENERAL DIMENSION Arms to arms inner width ±10mm 530 mm 500 mm

530 mm

550 mm

440mm

480mm Seat to floor height ±10mm 400 * Backrest to floor height ±10mm 1000 900

1000

1050 Arms to floor height 630 mm * COLOUR & FINISH All steel components should be Epoxy polyester powder coated(DFT 40-60 microns) * WARRANTY Warrantee period in number of years 2-YEAR 3-year

4-year

5-year

1-YEAR

2-YEAR CERTIFICATION Test reports to be furnished to buyer on demand YES * OEM of offered product is ISO 9001:2015 certified YES * OEM of offered product is ISO 14001:2015 certified YES * 3/4 OEM of offered product is ISO 18001:2007 certified YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ratri Parida 768019

Indian Institute of Management Sambalpur

Sambalpur University Campus

Jyoti Vihar

Burla

Sambalpur

Odisha- 768019 200 15