Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹4.4 L
EMD Value
₹4,400
Closing Date
26 Nov 2026, 5:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
SE RANDB KHORDHA
O/o the Superintending Engineer R and B Division, Khordha
Repair and maintenance of electrical work in ULB Level MPIS at Balugaon NAC in the district of Khordha Buildings.
2026_EICCL_145723_1
TCN-22
Open Tender
Electrical Works
Percentage
30 days
Khordha
2 documents required · 2 mandatory
₹2,000
₹4,400
26 Nov 2026
9 Nov 2026
27 Nov 2026
9 Nov 2026
26 Nov 2026
9 Nov 2026
9 Nov 2026 - 20 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and installation of 36Watt Surface/ Recess type Panel light 2x2 ft., Dimension-595mm x 595 mm x 70mm (+/- 10%) of following body material and construction as per IS : 10322 with metalic body driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -5 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, driver supply connection with Phase, Neutral and Earth terminal,THD < 10% , P. F. 0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K/ 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. Minimum 5 year OEM warranty. System lumen efficacy >= 130 lm/ Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.
(Thermal management: heat sink of aluminium housing such
that LED junction temperature shall not rise above 90°C). (All the reports shall be furnished from 3rd Party Central/ State Govt/ Private Lab. The Lab should be NABL accredited lab). (Make:- Wipro/ LT/ Bajaj/ Havells/ Panasonic/ Phillips/ Jaquar) Powder coated die cast/ Extruded aluminium Body (Thickness > 1.20 mm) | 8 | nos | 5,069 | ₹40,552 |
| 2 | Supply and installation of 10Watt Sleek LED mirror light fitting with extruded polycarbonate housing, High optically efficient diffuser, The luminaire should be Replacement with 2 years, Matt Surface, Plastic and aluminium Service Life: 15,000 Hrs (min) as details in items. (Make:- Wipro/ LT/ Bajaj/ Havells/ Panasonic/ Phillips/ Jaquar) | 1 | nos | 377 | ₹377 |
| 3 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored). | 18 | nos | 42 | ₹756 |
| 4 | Supply and installation of 18 watt LED Recessed / surface Down lighter (Round/ square/ Rectangular) (Pro SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with metalic body driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 deg to 40 deg centigrade, internal surge protection of 4.0 KV with Short & Open circuit protection, driver supply connection with Phase, Neutral and Earth terminal ,THD < 10% , P. F. 0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends , CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. Minimum 5 year OEM warranty. System lumen efficacy 120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.
(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) (All the reports shall be furnished from 3rd Party Govt. approved NABL accredited lab). (Make:- Wipro/ LT/ Bajaj/ Havells/ Panasonic/ Phillips/ Jaquar) Powder coated die cast/ Extruded aluminium Body including trim with Aluminium Reflector | 4 | nos | 2,136 | ₹8,544 |
| 5 | Supply, Installation, Testing and Commissioning of following sweep ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, 100% copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req. (Make: USHA/ Havells/ Crompton) 1200mm sweep, BEE 5 star rating, service value 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) (Make: USHA(Technix)/ Havells(Pro28)/ Crompton(Niteo)) | 5 | nos | 4,060 | ₹20,300 |
| 6 | Supply and installation of 250Watt Flood Light, powder coated pressure die cast aluminium body, Precise lens, Polycarbonate (PC) Lens with built in driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F. 0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection,EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect. Minimum 5 year OEM warranty. System lumen efficacy 120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (All the reports shall be furnished from 3rd Party Central/State Govt/Private Lab. The Lab should be NABL accredited lab). (Make:- Wipro/ LT/ Bajaj/ Havells/ Panasonic/ Phillips/ Jaquar) | 18 | nos | 11,639 | ₹2,09,502 |
| 7 | S/F of 32A Flash type DP switch (Make - Cona/ Anchor) | 5 | nos | 277 | ₹1,385 |
| 8 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Dome/Bullet Camera, 1/2.8" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 - 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance - Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : 30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make-Honeywell Value series/Pelco/Axis/Bosch | 3 | nos | 12,500 | ₹37,500 |
| 9 | Supplay installation testing & commission of 8 port Giga Poe + 2 Uplink Giga ( Working up to 130 mtr) (CP PLUS/secureye /Equi). As per Derection of Enginer in charge. | 2 | each | 7,800 | ₹15,600 |
| 10 | Supplying and drawing following sizes of FRLS/FRLSH PVC insulated class 2 copper conductor, single core cable conforming to IS 694, IS 8130, IS 5831 in the existing surface/ recessed steel/ PVC conduit as required. (Make Of Wire:- Finolex/ Polycab/ Havells/ KEI/ Anchor/ V-guard/ RR kabel) (Make of Conduit:- Norpack/ AKG/ BEC/ Precision/ Polycab/ Anchor/ Sudhakar/ Supreme/ Kinjal) 3X4Sqmm | 140 | mtr | 217 | ₹30,380 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_2.pdf
PDF • 1.66 MB
Tendernotice_1.pdf
PDF • 0.49 MB
BOQ_619576.xls
BOQ • 0.27 MB
corrigendum22.pdf
PDF • 1.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .