SPL REPAIR TO BLDG NO 10F 1 BLOCK AT OFFRS MESS, 02X LAVARATORY BLOCKS AT BLDG NO P 106 OF 2TT WG AND ROOF TREATMENT OF BLDG. NO P-59, CENTRE HQ OF AMC C AND C UNDER GE (EAST) LUCKNOW

Amount

Demolition of cement concrete (unreinforced) in floors and pavings not exc 15cm thickness (above or below GL) complete all as specified and directed

Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.

Taking down cement or cement lime plaster or stone/brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from the frame) area not exc 1.5 sqm each complete with hold fasts etc complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from the frame) area exc 1.5 sqm but not exc 4.0 sqm each with hold fasts etc complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.

M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in CM 1:6 complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:4) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:4) mixed with water proofing compound @ 3 % by weight of cement on other than fair faces of brick/stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed. (Note:- WPC shall be measured and paid separately 'Only')

M&L for 15mm thick rendering in CM (1:6) on other than fair faces of brick work/stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in floors complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.11 sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exc 0.11 sqm but not exc 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in CM 1:4 complete all as specified and directed.

All as per item No. 14 but on skirting over 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

S&F pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc ocmplete all as specified and directed.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc ocmplete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commerical type on both sides complete all as specified and directed.

S&F 2nd class hardwood, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, fitted with cut and mitred beads for securing glass etc, sizes of members shutters as specified in SSR Part I, section 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed.

S&F 2nd class hardwood, 35mm thick, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS : 1003 (part I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm pre-laminated coloured PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with pre-laminated sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded pre-laminated (Nut Brown colour) PVC sheet on the front face & 2mm pre-laminated (Nut Brown colur) PVC sheet on back face, and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F in repair 3mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F 3mm thick glass, ordinary quality fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F MS butt hinges, medium weight, cold rolled, ISI marked of size 100mm, complete all as specified and directed.

S&F 100mm butt hinges stainless steel with galvanised mild steel hinge pin anodised ISI marked and fixed, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

S&F in repair mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed

M&L cutting holes in brick walls (not exc half brick) for inserting hold fasts and making good dismantled portion in PCC 1:2:4 (20mm thick stone aggregate) and CM 1:3 complete all as specified and directed.

M&L mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290 , Gde -165 complete all as specified and directed.

Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.

Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.

S&F 15mm GI water tubing (concealed type), medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

S&F 20mm GI water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

Refixing old 15mm GI tubing (concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

S&F for 500 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top ) hoisted & fixed in position including dismantling of existing unserviceable RCC/PVC water tank complete all as specified and directed.

M&L for disconnecting existing tanks exc 250 ltr and not exc 500 ltr capacity setting a side (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position complete all as specified and directed.

S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed

S&F in repair tubular towel rail, chromium plated brass 20mm dia 'D" type 60cm long between flanges complete all as specified and directed.

S&F in repair brass chromium plated shower rose of 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, float valve, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F in repair wash hand basins vitreous china, coloured flat back size 550 x 400mm fixed including bracket complete all as specified and directed.

S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.

S&F in repair 15mm bore cast copper alloy chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (concealed type), screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

Taking out old U/S water closet and S&F vitreous China "Orissa pattern" size 580 x 440mm" coloured, with intergral foot rests with vitreous china 'P' or 'S' trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed.

Supply only liquid water proofing compound of approved quality and make confirming to ISI complete all as specified and directed.

Taking down 100mm/75mm dia AC rain water pipe (any size or pattern) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Note:- AC rain water pipe shall be measured over all as fixed along the centre line over the fittings and accessories)

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors/trenches with & including existing/new PVC clamps complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors/trenches with & including existing/new PVC clamps complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75/110mm bore PVC (SWR) reducers complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry with mixture of white & grey cement and pigment over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection finished fair & even laid in alternative bays not exc 2 meter in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in soft loose soil complete all as specified and directed.

Demolition and breaking up SWG drain pipe line set in CM of description, 150mm dia including side packing / haunching complete all as specified and directed.`

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) for bed concrete to drain pipe packing under hunching for sides for 150mm dia SWG pipe lines complete all as specified and directed.

M&L for SWG drain pipe grade 'A' of 150mm dia laid in trenches including jointing in CM 1:3 complete all as specified and directed.

Returning and filling in approved earth including levelling spreading watering and well ramming in any layers not exc 25cm thick complete all as specified and directed.

Removing excavated materials not exc 100m and depositing where directed and complete all as specified and directed.

S&F in repair new rigid PVC waste pipe of approved quality 32mm bore, 75mm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width/ girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm thick wall putty, complete all as specified and directed.

M&L for preparation of old wall plastered surfaces and applying a coat of cement base paint complete all a specified and directed.

Complete removal of existing old wall surfaces and appling two coats of oil bound distemper over a coat of 1mm thick average thick wall putty, complete all as specified and directed.

S&F in repair 15 mm thick stop valves, cast copper alloy, chromium plated, with long shank and cup concealed type complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) and PVC seat cover excluding flushing cistern and flush pipe complete all as specified and directed

S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair soap dish, any type fixed to plugs with chromium plated brass screws completed all as specified and directed.

S&F in repair plastic water closet seat cover white, closed pattern with flat bottom & cover and aluminum anodised hinging device complete all as specifed and directed

Taking down existing treatment any type/any thickness on roof including taking down/removing the backing bed concrete if any and dispose off at a distance exc 100m complete all as specified and directed

M&L for brushing neat cement slurry with 3.0 Kg/sqm over roof slab complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in roof padding/ roof kerbs / benching / coved fillets etc rounded or chamfered on edges, complete all as specified and directed

M&L for roof/sunken treatment with polymeric water proofing mem brane with certain specification given below as under complete all as specified & directed (a) M&L plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 LTRs /Sqm and allow to dry (c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (d) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper (e) applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm.

M&L for 40mm thick brick tiles laid on 15mm thick screed bed in CM 1:6 and joints grouted flush in CM 1:3 with WPC as per manufacture's instruction complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but not exc 2.00 sqm and easing, adjusting and also refixing builders hardware as required and renewal of unserviceable screws and refixing in the same opening complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per serial item No 99 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per serial item No 99 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per Serial Item No 99 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board.

S&F switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

S&F socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.

S&F switch socket combination outlet 2 in 1, 3 pin, 05 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

S&F switch socket combination outlet 2 in 1, 3 pin, 06/16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

S&F lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

S&F in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed. Make : Crompton, Cat No : LBHE-10-CDL or equivalent in Havells, Cat No : RUGBYNEONFT10WLED760SSYMBOPC, PHILIPS Cat no WT202WLED6SCWPSUS2PC

S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC,Philips cat no TMC 501P1XT-LED22W P 3241

S&F LED tube light fittings 600 mm, 10W, 240V, 50Hz, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.

S&F in replacement of LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. Make : Crompton, Cat No : LSTP-45-CDL or equivalent in Havells/ Philips or equivalent as approved by GE.

S&F ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

S&F in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

S&F in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

S&F fan regulator , fulsh stapped type ,electronic ,230 Volt, complete all as specified and directed

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless complete all as specified and directed.

S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm complete all as specified and directed.

Cutting walls any type, making holes for fixing of exhaust fan of any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed

Supply only LED bulb 9/10 Watts suitable for B22 white in colour complete all as specified and directed.

S&F sheet metal enclosure with socket plug top and MCB SPN 20 Amp series with enclosure with a two pin and earth plug and socket complete all as specified and directed.

S&F in replacement TPN MCB DB 4 ways ,Double door with 415 Amps, Double door type complete all as specified and directed .

S&F in replacement MCB TPN 63 Amp, 415 Volt , C- series, 50 Hz, breking capacity-16 kA complete all as specified and directed .

S&F in replacement SPN MCB DB 8 ways with 200 Amps rated bus bar 240Volt, Double door type complete all as specified and directed.

S&F in replacement MCB SPN 40 Amps 240 V, C- curve, 50 Hz, breking capacity-10 KA complete all as specified and directed.

m/s raghubar dayal

ANIL CONSTRUCTION

KUMAR ENTERPRISES

M/S KAUSHIK CONSTRUCTION

QUALITY CONSTRUCTIONS CO

m/s durgesh traders & constractions

M/s Rathore Traders

M/S SWATI CONSTRUCTION

Rakesh Traders