NISER/IWD-ELE/SBS/2019-20/025

Supplying and fixing of 200A 4way double door MCCB panel board system including supply and fixing of Incoming and Out going MCCB, with Sheet steel enclosure, epoxy powder coating RAL 9002,IP41 with 400A - Rated short circuit withstand capacity of busbar 35kA at 415V for 1 sec. Suitable for 4P MCCB incomer& 3P MCCB outgoing (4nos.). Incoming: 200Amp,4P, 35KA, TM release with earth fault protection MCCB, Ics = 100% Icu. Out going: 4nos. of 100 Amp 3P, 16KA TM release MCCB Make: (Hager/ABB/Schnider/ Equivalent)

200 A, 25kA, FPMCCB, Thermal Magnetic release, Ics = 100% Icu Make: Schnider EASYPACT CVS.

Supplying and fixing 100Amp MCCB sheet steel enclosure, on surface or in recess, for 100 amp 4 pole MCCB with connections, testing and commissioning etc. as required. Make: Legrand/Hager/C&S

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, MCCB incomer TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 18), Double door VTPN DB Make: Hager/Legrand/Schnider

Supply of 63 A, 16 KA,TPN MCB (Hager/Legrand/Schnider)

10 amps. to 32 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity. (Hager/Legrand/Schnider)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. (But without MCB/RCCB/Isolator) including DB nomenclature SLD etc as required. 12 way , Double door. Make: Hager/Legrand/Schnieder

Supply and fixing of AC1 MNX25, 25 amp 2pole Power contactor with thermal magnetic realy (Ref. Model L&T MN2 Relay/ABBTA25DU 8.5-20), relay range (6-10 Amp) in the existing DB. Make: L&T/ABB

6 amps. to 25 amps. ratings , SPN MCB, “C” curve, 10 KA breaking capacity. (Hager/Legrand/Schnider)

Supply, Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required with double run 8 SWG GI wire. 3.5Cx150 Sq MM AL Armoured XLPE Cable Make: Polycab/Universal/RR Kabel

Supplying and making end termination with brass double compression gland and tinned copper lugs for 3.5Cx150 Sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. Make: Dowells/ Ismal & Gripwell/ Comet

Supply, Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required with double run 8 SWG GI wire. 3.5Cx50 Sq MM AL Armoured XLPE Cable Make: Polycab/RR Kabel/Universal

Supplying and making end termination with brass double compression gland and tinned copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5C X 50sq. mm Cable Make: Dowells/ Ismal & Gripwell/ Comet

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Make: Polycab/Havells/Universal

Supply, Laying and fixing of one number PVC insulated and PVC sheathed / XLPE copper power cable of 1.1 kV grade of following size on wall surface as required. 3 X 6 sq. mm CU Armoured XLPE Cable Make: Polycab/Havells/Universal

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Make: Polycab/Havells/Universal

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and fixing of 6 Module modular box with 2nos. of 6/16A socket out let and 2 nos. of 16amp Modular switch including installation, fixing of switch and socket and connection and nomenclature) Make: Legrand (Mylinc/Myrius) only

Supplying and fixing of DLP U-PVC trunking system (50x80 MM) with accessories on surface or on table surface as required. Make: Legrand/Hager/Equivalent only

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.