Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance 282 283 REMCO LAYOUT 1ST C CROSS 5TH A MAIN VIJAYANAGAR BANGALORE KARNATAKA 560040 | BENGALURU URBAN | KARNATAKA | 560040 | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Others-Invalid EMD submitted. |
| 4 | Rejected-Technical 388 SRI BENAKA 1ST PHASE 4TH STAGE VIJAYANAGAR MYSORE KARNATAKA 570017 | MYSURU | KARNATAKA | 570017 | Rejected-Technical Not complied as per NIT |
Tender Value
₹40.0 L
EMD Value
₹78,000
Closing Date
27 Apr 2023, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Director, CSIR-CFTRI, Mysore
Cheluvamba Mansion, V V Mohalla, Mysore
Laying of New UG Cables, Indoor and Outdoor Panels, Outdoor Lighting and Machine Power Lines to CoE-MIC under Phase II at CSIR-CFTRI, Mysuru
2023_CSIR_150146_2
E/EW/004/1012/2022-23
Open Tender
Electrical Works
Item Rate
90 days
CSIR-CFTRI Mysore
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹78,000
1 May 2023
21 Apr 2023
28 Apr 2023
21 Apr 2023
27 Apr 2023
21 Apr 2023
21 Apr 2023 - 26 Apr 2023
Amount
Supplying, Installation, Testing & Successful Commissioning of 30 Watts, IP65 LED Focus light fitting (cool day light white light), complete with internal wiring, 1 metre length of any standard make rated 2 core copper wire etc., ready to use suitable to fix on wall / ceiling with required harware arrangements and to work with 230V Single Phase, 50Hz AC Supply; to service with Item No: 2.1 as required. LED Fitting Make: Philips / Wipro / Havells / Bajaj / Syska.
Supplying, Testing and Successful Commissioning of 4.0 Core x 6.0 sq.mm size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. The laying have already been considered under Main / Sub Serial nos of Item Nos:4, 17, 18 and to use Main / Sub Serial nos of Item Nos: 19 & 20 as required while laying at the site. Electrical Engineer-In Charge will give the Instruction. UG Cable Make: CCI / Polycab / Havells / Universal / KEI.
Supplying, Testing and Successful Commissioning of 3.5 Core x 35.0 sq. mm size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. The laying have already been considered under Main / Sub Serial nos of Item Nos:4, 17, 18 and to use Main / Sub Serial nos of Item Nos: 19 & 20 as required while laying at the site. Electrical Engineer-In Charge will give the Instruction. UG Cable Make: CCI / Polycab / Havells / Universal / KEI.
Supplying, Testing and Successful Commissioning of 3.5 Core x 95.0 sq. mm size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. The laying have already been considered under Main / Sub Serial nos of Item Nos:4, 17, 18 and to use Main / Sub Serial nos of Item Nos: 19 & 20 as required while laying at the site. Electrical Engineer-In Charge will give the Instruction. UG Cable Make: CCI / Polycab / Havells / Universal / KEI.
Supplying, Testing and Successful Commissioning of 3.5 Core x 400.0 sq. mm size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. The laying have already been considered under Main / Sub Serial nos of Item Nos:4, 17, 18 and to use Main / Sub Serial nos of Item Nos: 19 & 20 as required while laying at the site. Electrical Engineer-In Charge will give the Instruction. UG Cable Make: CCI / Polycab / Havells / Universal / KEI.
Labour charges for digging 8 feet of depth below ground level, including hard soil if any encountered, fixing the Item No: 13, refilling of soil etc., as required. (along with solid charcoal / coke and salt from S.No:13 as required, already estimated under S.No.13)
Laying of one number of PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade of Upto 35 sq. mm size through the already laid HDPE Pipe as required. Please note that excavation of trench & refilling are already covered under Main/Sub Serial Nos of Item No.20.
Laying of one number of PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade of Above 35 sq. mm and upto 95 sq. mm size through the already laid HDPE Pipe as required. Please note that excavation of trench & refilling are already covered under Main/Sub Serial Nos of Item No.20.
Laying of one number of PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade of Above 185 sq. mm and upto 400 sq. mm size through the already laid HDPE Pipe as required. Please note that excavation of trench & refilling are already covered under Main/Sub Serial Nos of Item No.20.
LT Double Door IP55 Indoor Panel Box of size 36" (W) x 36" (H) x 12" (D) made out of 1.6mm thick CRCA sheet steel enclosure, painted with two coats of red oxide & two coats of enamel paint siemens gray colour and consisting of 4 x 200 Amps Capacity Tinned Copper BusBar strips with 3 Phase colour coding and insulation. At the bottom, 1 No of 125A., 36KA Range 4P MCCB has to be provided. The output from the MCCB has to be connected to the BusBars either with same size & range Copper BusBar links / Copper Cables. Each Busbar to have 5 nos of holes at equal distance to connect UG Cables / Copper Wires of size from 10 Sq.Mm to 35 Sq.Mm. Din rail provisions has to be made to fix 5 Nos of 4 Pole MCBs / RCCBs to connect the outputs tapped from the BusBar. All plate cutting for fixing glands, entry and exit of UG cables are to be made available for minimum of 3 sets of UG Cables. The Panel Box should have provision for mounting on the ground with total stand height of 1.5 Feet grouted to the floor, doors on both front & rear side with locking arrangements, RYB LED Indicating Lamps, Suitable Range Multifunctional 3 Phase, 4 Wire Panel Meter to read & display Voltage, Current etc., 2 nos of earth bolts on either side of the box, covering the Bus-bar visibility with 6mm Hylem sheets from inside, water proof vents on both the sides covered with wire mesh from inside to avoid entry of any insects entering inside the box as required. Panel Meter Make: HPL / L&T / Schneider & MCCB Make: L&T / ABB / Schneider / Havels. Panel drawing to be approved by the Electrical Engineer In-Charge.
LT Double Door IP55 Indoor Panel Box of size 36" (W) x 48" (H) x 18" (D) made out of 1.6mm thick CRCA sheet steel enclosure, painted with two coats of red oxide & two coats of enamel paint siemens gray colour and consisting of 4 x 200 Amps Capacity Tinned Copper BusBar strips with 3 Phase colour coding and insulation. At the bottom, 1 No of 200A., 36KA Range 4P MCCB has to provided. The output from the MCCB has to be connected to the BusBars with same size & range Copper BusBar links. Each Busbars to have 5 nos of holes at equal distance to connect UG Cables / Copper Wires of size from 10 Sq.Mm to 35 Sq.Mm. Din rail provisions has to be made to fix 5 Nos of 4 Pole MCBs / RCCBs to connect the outputs tapped from the BusBar. All plate cutting for fixing glands, entry and exit of UG cables are to be made available for minimum of 3 sets of UG Cables. The Panel Box should have provision for mounting on the ground with total stand height of 1.5 Feet grouted to the floor, doors on both front & rear side with locking arrangements, RYB LED Indicating Lamps, Suitable range Multifunctional 3 Phase, 4 Wire Electronic Trivector Energy Meter with Class 1.0 accuracy, required CTs to read and record upto 250 Amps. to fix above the Panel in a suitable size Metal Box, 2 nos of earth bolts on either side of the box, covering the Bus-bar visibility with 6mm Hylem sheets from inside, water proof vents on both the sides covered with wire mesh from inside to avoid entry of any insects entering inside the box as required. Meter Make: HPL / L&T / Schneider & MCCB Make: L&T / ABB / Schneider / Havels. Panel drawing to be approved by the Electrical Engineer In-Charge.
LT Double Door IP55 Indoor Panel Box of size 36" (W) x 60" (H) x 18" (D) made out of 1.6mm thick CRCA sheet steel enclosure, painted with two coats of red oxide & two coats of enamel paint siemens gray colour and consisting of 1 No of 400A, 50KA Range 4P MCCB and 2 Nos of 250A, 36KA Range 4P MCCB. The output from the 400A MCCB has to be connected to the 2 x 250A MCCBs with Independent 250A range Tinned Copper Busbar Strips / 250 A range Copper UG Cable. All plate cutting for fixing glands, entry and exit of UG cables are to be made available for minimum of 3 sets of 95 Sq.Mm UG Cables. The Panel Box should have provision for mounting on the ground with total stand height of 1.5 Feet grouted to the floor, doors on both front & rear side with locking arrangements, RYB LED Indicating Lamps, Suitable range Multifunctional 3 Phase, 4 Wire Electronic Trivector Energy Meter with Class 1.0 accuracy, required CTs to read and record upto 250 Amps. to fix above the Panel in a suitable size Metal Box, 2 nos of earth bolts on either side of the box, covering the Bus-bar visibility with 6mm Hylem sheets from inside, water proof vents on both the sides covered with wire mesh from inside to avoid entry of any insects entering inside the box. Electronic Trivector Energy Meter & MCCB Make: L&T / ABB / Schneider / Havels. Panel drawing to be approved by the Electrical Engineer In-Charge.
LT Double Door IP55 Outdoor Panel Box of size 60" (W) x 72" (H) x 36" (D) made out of 1.6mm thick CRCA sheet steel enclosure, painted with two coats of red oxide & two coats of enamel paint siemens gray colour and consisting of 4 nos. of 800 Amps Capacity, Aluminium Busbar strips with proper colour coding and insulation. At the bottom,1 No of 800A., 50KA Range 4P MCCB has to provided. The Input side of 800A MCCB will be terminated with 2 x 400 Sq.Mm UG Al Cable. The output from the 800A MCCB has to be connected to the 800A BusBars with same size & range Aluminium BusBar links. From each of this Busbar, 250Amps Capacity Aluminium Busbar link has to be connected to the Four Numbers of 250A, 50KA, 4P MCCBs in the Panel individually. The output of 250A MCCB will be terminated with 95 Sq.Mm UG Cable. All plate cutting for fixing glands, entry and exit of UG cables are to be made available for minimum of 4 sets of UG Cables. The Panel Box should have provision for mounting on the ground with total stand height of 2.5 Feet grouted above the floor with cement & brick works, doors on both front & rear side with locking arrangements, RYB LED Indicating Lamps, Suitable Range Multifunctional 3 Phase, 4 Wire Panel Meter to read & display Voltage, Current etc., 2 nos of earth bolts on either side of the box, covering the Bus-bar visibility with 6mm Hylem sheets from inside, water proof vents on both the sides covered with wire mesh from inside to avoid entry of any insects entering inside the box as required. Meter Make: HPL / L&T / Schneider & MCCB Make: L&T / ABB / Schneider / Havels. Panel drawing to be approved by the Electrical Engineer In-Charge.
LT Double Door IP55 Indoor Panel Box of size 36" (W) x 72" (H) x 36" (D) made out of 1.6mm thick CRCA sheet steel enclosure, painted with two coats of red oxide & two coats of enamel paint siemens gray colour and consisting of 4 nos. of 800 Amps Capacity, Aluminium bus-bar strips with proper colour coding and insulation. At the bottom,1 No of 800A., 50KA Range 4P MCCB has to provided. The output from the MCCB has to be connected to the BusBars with same size & range Aluminium BusBar links. Each Busbars to have 3 nos of holes at equal distance to connect UG Cables of size 95 Sq.Mm to 400 Sq.Mm. All plate cutting for fixing glands, entry and exit of UG cables are to be made available for minimum of 3 sets of UG Cables. The Panel Box should have provision for mounting on the ground with total stand height of 1.5 Feet grouted to the floor, doors on both front & rear side with locking arrangements, RYB LED Indicating Lamps, Suitable Range Multifunctional 3 Phase, 2 nos of earth bolts on either side of the box, covering the Bus-bar visibility with 6mm Hylem sheets from inside, water proof vents on both the sides covered with wire mesh from inside to avoid entry of any insects entering inside the box as required. MCCB Make: L&T / ABB / Schneider / Havels. Panel drawing to be approved by the Electrical Engineer In-Charge.
LT Double Door IP55 Outdoor Panel Box of size 36" (W) x 48" (H) x 36" (D) made out of 1.6mm thick CRCA sheet steel enclosure, painted with two coats of red oxide & two coats of enamel paint siemens gray colour and consisting of 4 nos. of 200 Amps Capacity, Aluminium bus-bar strips with proper colour coding and insulation. At the bottom, 1 No of 200A, 50KA Range 4P MCCB has to provided. The output from the MCCB has to be connected to the BusBars with same size & range Aluminium BusBar links. Each Busbars to have 3 nos of holes at equal distance to connect UG Cables of size 35 Sq.Mm. All plate cutting for fixing glands, entry and exit of UG cables are to be made available for minimum of 3 sets of UG Cables. The Panel Box should have provision for mounting on the ground with total stand height of 1.5 Feet grouted to the floor using cement, bricks etc., doors on both front & rear side with locking arrangements, RYB LED Indicating Lamps, Suitable Range Multifunctional 3 Phase, 4 Wire Electronic Trivector Energy Meter, 2 nos of earth bolts on either side of the box, covering the Bus-bar visibility with 6mm Hylem sheets from inside, water proof vents on both the sides covered with wire mesh from inside to avoid entry of any insects entering inside the box. Electronic Trivector Energy Meter & MCCB Make: L&T / ABB / Schneider / Havels. Panel drawing to be approved by the Electrical Engineer In-Charge.
Single Door IP55 Indoor MCCB Box of size 24" (W) x 24" (H) x 12" (D) made out of 1.6mm thick CRCA sheet steel enclosure, painted with two coats of red oxide & two coats of enamel paint siemens gray colour and consisting of 1 No of 125A, 36KA Range 4P MCCB. The Box should have provision for mounting on the wall with required hardware arrangements, locking arrangements for door, RYB LED Indicating Lamps, 2 nos of earth bolts on either side of the box, water proof vents on both the sides covered with wire mesh from inside to avoid entry of any insects entering inside the box. MCCB Make: L&T / ABB / Schneider / Havels. Panel drawing to be approved by the Electrical Engineer In-Charge.
Supplying and fixing metal box of 100 mm (L) X 100 mm (H) X 60 (D) mm deep sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick (apprx.10.5Kg plate weight) including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. Note: Masonry enclosure size is 1.5 Feet x 1.5 Feet x 1.5 Feet constructed with Cement, Sand and Bricks; The Cover plate should be of MS / Aluminium / Cast Iron; 50Kg of solid charcoal / coke and 50 Kg of sea salt for each earthpit; The copper plate has to be Tin coated; The GI Pipe have to be brazed to the copper plate using bronze; 2 x 4.0mm Dia Solid Bare Copper Wire to run upto the top of the pipe tightned with 2 Sets of SS nut, bolts and washers on the plate; 2 Sets on the GI Pipe and finally terminated to 2 Sets on the top of the pipe. Drawing to be approved by the Electrical Engineer In-Charge.
Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia GI pipe from earth electrode including connection with copper thimble excavation and re-filling as required.
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required.
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm size direct in the existing RCC/HUME/METAL pipe as required.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Above 185 sq. mm and upto 400 sq. mm direct in the existing RCC/HUME/METAL pipe as required.
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm (clamped with 1mm thick saddle) size on wall surface as required.
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) size on wall surface as required.
Supplying and laying of 63mm dia (OD-63mm & ID-51mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, joining etc. in the existing trench, complete as required.
Supplying and laying of 90mm dia (OD-90mm & ID-76mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, joining etc. in the existing trench, complete as required.
Supplying and laying of 120mm dia (OD-120mm & ID-103mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, joining etc. in the existing trench, complete as required.
Supplying and laying of 63mm dia (OD-63mm & ID-51mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, joining etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
Supplying and laying of 90mm dia (OD-90mm & ID-76mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, joining etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. .
Supplying and laying of 120mm dia (OD-120mm & ID-103mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, joining etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
Supplying and making end termination with brass compression gland and aluminium lugs for 3 1/2 x 35 sq. mm (32mm) PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Aluminium Lugs and Brass Compression Gland Make: Dowells / Comet / Braco. Note: Each means all lugs for one end of the UG Cable.
Supplying and making end termination with brass compression gland and aluminium lugs for 3 1/2 x 95 sq. mm (45mm) PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Aluminium Lugs and Brass Compression Gland Make: Dowells / Comet / Braco. Note: Each means all lugs for one end of the UG Cable.
Supplying and making end termination with brass compression gland and aluminium lugs for 3 1/2 x 400 sq. mm (82mm) PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Aluminium Lugs and Brass Compression Gland Make: Dowells / Comet / Braco. Note: Each means all lugs for one end of the UG Cable.
Providing, laying and fixing 100 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trench ( 75 cm deep) and re-filling etc. as required. G.I Pipe Make: Apollo / Jindal / Zenith / Tata
Supplying and fixing 4 way (4 + 12), Double Door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator). Make: L&T / ABB / Schneider / Havels.
Supplying and fixing 25 Amps rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand / Schneider / ABB / L&T
Supplying and fixing 40 Amps rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand / Schneider / ABB / L&T
Supplying and fixing 63 Amps rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand / Schneider / ABB / L&T
Demolishing cement concrete Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-incharge.
Cutting road and making good the same including supply of extra quantities of materials i.e. aggrigate, moorum screening, red bajri and labour required. Water bound macadam.
Cement Concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tampling complete.
SRS ELECTRICALS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .