BARCT/NRB/GSO/EMT180/2024/375

Amount

Removal , Modification and Distribution Board work

Removal of complete surface switch boards, Holders, Celling rose, Celling Fans and other electrical fittings, disconnection of wire termination and reconnection of the same wire in new switch boards in Type- C flats in BARC Staff Colony, Tarapur. (aprrox. 14Nos. switch boards, 04Nos. Holders, 04Nos. Celling rose , 03Nos. Celling Fans, 01No. Geyser etc.) Total nos. of flats- 100 Nos.

Removal of complete surface switch boards, Holders, Celling rose, Celling Fans, Distribution Board and other electrical fittings, disconnection of wire termination and reconnection of the same wire in new switch boards in Type-B flats in BARC Staff Colony, Tarapur. (aprrox. 10Nos. switch boards, 04Nos. Holders, 03Nos. Celling rose , 02Nos. Celling Fans, 01No. Geyser, 01 No Distribution Board etc.) Total nos. of flats- 40 Nos.

Modification in DB Box - Disconnection of MCB wire termination in surface mount existing DB box, removing & Pushing back the DB box and make it concealed, reconnection of MCB termination in Type-C Flat in BARC Staff Colony, Tarapur. Civil work required for concelead the DB box is in scope of the contractor. Total nos. of flats - 100 Nos.

Supplying and fixing 12 way , Double door, single pole and neutral,sheet steel, MCB distribution board, 240 V, on recess, complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). Civil work required for concelead the DB box is in scope of the contractor.

Supplying and fixing Cable End Box (Loose Wire Box) suitable For 14 way, Double door SPN MCBDB, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required. Civil work required for concelead the DB box is in scope of the contractor.

Supply installation, testing and commissioning of 32A , 2 pole, 4 Module, RCBO(30mA) installed in the existing DB.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, SP MCB suitable for inductive load of in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply, installation and Guarantee of 1.1KV grade, FRLS PVC insulated wire of following size and laying through casing caping or pulling through conduit pipe safely with out any joint in wire. All wires should be confirm IS:694 with latest amendments. (Red/Yellow/Blue, Black, Green colour)

Supply and Guarantee of 1.5 mm², flexible Multistrand single core copper wire

Installation of 1.5 mm², flexible Multistrand single core copper wire

Supply and Guarantee of 2.5 mm², flexible Multistrand single core copper wire

Installation of 2.5 mm², flexible Multistrand single core copper wire

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. Civil work required for concealed the box is in scope of the contractor.

8 Module (125mmX125mm)

6 Module (200mmX75mm)

4 Module (125mmX75mm)

3 Module (100mmX75mm)

2 Module (75mmX75mm)

1 Module (75mmX75mm)

Fixing of switches/sockets/telephone sockets Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required in Type-C Flat in BARC Staff Colony, Tarapur. Total nos. of flats - 100 Nos.

15/16 A switch

6 pin 15/16 A socket outlet

5/6 A switch

3 pin 5/6 A socket outlet

Telephone socket outlet

Bell Push

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

1200mm BLDC Ceiling Fans Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistancemore than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required in Type-C & B Flats in BARC Staff Colony, Tarapur. 03 Nos. fan required in Type-C flat & 02 Nos. fan required in Type-B flat. Total Nos. of 1200mm BLDC Ceiling Fans = 300 + 180 = 480 Nos.

Exhaust Fan 150mm sweep Supply Installation, testing and commissioning of 150mm sweep, High speed, PVC body, Exhaust fan operate on 230V, 50Hz, AC supply, conforming to relavent IS. in Type-C & B Flats in BARC Staff Colony, Tarapur. Total nos. of flats (Type-C & B ) - 100+ 90 = 190, 01No. exhaust fan required = 1x 190 = 190 Total nos. of Exhaust Fan = 190 Nos.

Supply

Installation

Exhaust Fan 200mm sweep Supply Installation, testing and commissioning of 200mm sweep, High speed, PVC body, Automatic operated shutter Exhaust fan operate on 230V , 50Hz, AC supply, conforming to relavent IS. in Type-C & B Flats in BARC Staff Colony, Tarapur. Total nos. of flats (Type-C & B ) - 100+ 90 = 190, 01No. exhaust fan required = 1x 190 = 190 Total nos. of Exhaust Fan = 190 Nos.

Supply

Installation

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure in concealed, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Total nos. of flats Type-C - 100, 01No. Geyser point required in each flat

PVC Conduit Supplying and fixing of 25mm of medium class PVC conduit along with accessories in recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply and Installation of Modi / Precision make Casing Caping Patti 25 mm x 10 mm x 1.2mm with all accessories such as T, inner outer bend, coupling, junction etc. Installation of Casing Caping Patti 25 mm x 10mm x 1.2mm by drilling hole and fixing with 35/8 screw and rawl plug.

MS switch box with Hylam Sheet cover Supply, installtion, testing and commissioning of MS box made out of 2.0 mm thick CRCA sheet duly applied with red oxide and enamelled paint and have internal collar1/2 inch in two sides to fix the Hylam sheet and cover plate made of sheet 3.0 mm thick Hylam / Backelite of white color, Depth of box should be Minimum 50mm. switch board should consist of piano switches, sockets, Regulator etc. as given below. These switch boards are made to be concealed. Civil work required for concealed the switch box is in scope of the contractor.

Switch board of size 200x 175 x 50 mm with 5 Nos. 6 A SP switch, 1 No. 6 A socket and 1 No. Fan Regulator for Hall main switch board.

Switch board of size 200x175x 50 mm with 5 Nos. 6 A SP switch, 2 No. 6 A socket and 1 No. Fan Regulator for Bedroom main switch board.

Switch board of size 100x175 x 50 mm with 2 Nos. 6 A SP switch, 2 No. 6 A socket for TV point.

Switch board of size 100x125x 50 mm with 2 Nos. SP switch, 1 No. 6 A socket for balcony.

Powder coated Switch board of size 100x175 x 50 mm with 4 Nos. 6A SP switch,1 No. 6 A socket for Kitchen and passage.

Switch board of size 100x125 x 50mm with 2 Nos. 6 A socket for Kitchen.

Switch board of size 100x175 x 50 mm with 1 No. 20A SP switch , 1 No.20 A socket for Power Point.

Switch board of size 100x100 x 50 mm with 1 No. 6A SP switch and 1 No. 6 A socket for kitchen

Modification in Switch Box - Disconnection of wire termination in surface mount existing Metal Switch box, removing & Pushing back the Switch box and make it concealed, reconnection of wire termination in Type-B Flat in BARC Staff Colony, Tarapur. Civil work required for concelead the Switch box is in scope of the contractor. Total nos. of flats - 90 Nos., 03 Switch Box in each flat. Total nos. of switch board = 3 x 90 =270 Nos.

MEPF INFRA

Ramesh Electrical and Mechanical Works

SARASWAT ENGINEERING SERVICES