MODERNISATION OF LOGISTICS AND STORAGE FACILITIES (PHASE-II) AT BRD, AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.

All as per item No 1 here-in-before but exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

S&F for anodised powder coated aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc.complete all as specified and directed.

M&L for powder coated (min 50 micron) aluminium three track sliding window with extruded profile of top bottom & side track for fixing 5.5mm thick tinted glass fitted with glazing clips and EPDM rubber in two shutters and fixing SS wire mesh in one shutter and powder coated deco grill including roller and handle complete all as specified and directed. Note:- (a) including 5.5mm thick tinted glass, SS wiremesh, Deco grill etc in this item. (b) Framed section 3 track size = 92x31.75x1.5mm (c) Shutter section size = 40x18x1.55mm

S&F anodised aluminium powder coating of any clour (thickness or powder coating not less than 50 micron) door shutters aluminium section weighing 0.55 Kg/m including neccsary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sq.m in each pane complete all as specified and directed.

S&F solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed.

S&F aluminium extruded section body door closer hydraulically regulated designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Taking down cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar in 1:4 in two layers with backing coat 10 mm thick and second coat 5 mm thick with WPC on fare face of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separatly under respective item of this schedule.

M&L for rendering 5mm thick in cement mortar 1:3 on ceiling finishing even and smmoth without using extra cement complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coat of oil bound distemper on new surface complete all as specified and directed.

All as per item No 13 here-in-before but three coat white wash on ceiling

All as per item No 13 here-in-before but two coat of cement base paint on wall

Demolition of textile coverings including frames (if any) and cover fillets (measured flat and not girthed) complete all as specified and directed.

S&F 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling sectin (Not exc 1.2m length) of 0.55 mm thick ness having kurled web of 50mm and flanges of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia gI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and directed.

M&L for providing and fixing gypsum board 12 mm thick in ceiling fixed with screw as per manufactures instruction complete all as specified and directed.

M&L for preparation new ceiling surfaces and applying two coat of oil bound distember over a coat of primer complete all as specified and directed.

Surface excavatiion n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L broken brick hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L for cement concrete 75 mm thick type C2, 1:4:8 using 40 mm graded stone aggregate as in floor sub base complete all as specified and directed.

M&L for 150 mm thick PCC 1:1.5:3 type A1 using 20 mm graded crsued stone aggregate as in PCC hard standing, finish the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for forming 12mm thick expansion joints, 100 mm thick concrete slab, filled with pre-formed bituminous filler and top 30 mm primer and sealed with sealing compound grade 'A' complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper of approved tint complete all as specified and directed.

All as per item No 25 here-in-before but one coat of cement base paint.

All as per item No 25 here-in-before but one coat of white wash on ceiling.

Taking down steel rolling shutter of size exc 5 sqm but not exc 15 sqm each complete all as specified and directed.

S&F gear operated type rolling shutters of 1.25 mm thick laths, with out ball bearing including top cover, anchoring rod, and one shop coat of primer with bevel gear box and crank handle erected in position as indicated in position complete all as specified and directed.

S&F suitable ball bearing for rolling shutters complete all as specified and directed.

S&F safety lever locks mild steel with 4 levers per rolling shutters complete all as specified and directed.

M&L preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid over and including 20mm screed bed in cement mortar1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

All as per item No 34 here-in-before but on vertical surfaces over and including 10 mm thick rendering in cement mortor1:4 complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40mm graded stone agg 75mm thick as in plinth protection complete all as specified and directed.

M&L for treatment of soil under existing floors using chemical emulsion for post constructional antitermite treatment @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with ement mortar 1:2 (1 Cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for rubbing and polishing to the esixting kota stone complete all as specified and directed.

Dismantling structural steel work including doors,gates but excluding framed truss etc.complete all as specified and directed.

Excavating in post holes soft/loose soil (or similr holes) not exc 0.5 cum getting out returning filling in and reamming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance not exc 50m and making good surfaces complete all as specified and directed.

M&L for cement concrete in foundations filling and mass concrete type B2, 1:2:4 using 40mm graded stone aggregate complete all as specified and directed.

M&L rolled MS sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L for Fe 410 -W (Gde- E- 250) quality- A MS pate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc.flushing at junction of parapets complete and removing the same to the places where directed complete all as specified.

M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc at any height and in any position complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:3 on brick work or concrete surfaces on other than fair face surface,surface finished even and smooth without using extra cement using waterproofing compound fair and complete all as specified and directed. Note:- WPC shall be measured and paid separatly under respective item of this schedule.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for applying water proofing treatment with APP modified polymeric membrane centre core of 100 micron HMHDPE, weight not less than 3 Kg/Sqm and clear thickness of membrane not less than 3 mm, on newly prepared surface with torch application as per manufacturer instruction complete all as specifid and as directed with the following description :- (a) Apply evenly a coat of bituminous primer conforming to IS -3384 @ 0.40 Kg/Sqm. (b) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a IInd course. (c) Laying of APP modified polymeric membrane , 100 micron HMHDPE, having outer film 20 micron each, 3mm thick , weight @ 3 Kg/Sqm as a IIIrd course. (d) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a forth course.

Taking down carefully aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceiling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc.

M&L for point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed in and including PVC conduit with all fittings (concealed type) medium grade ISI marked and PVC insulated FRLS copper conductor cable of size 1.5 sq mm as earth wire , connected to common earth dolly suitable for mounting modular switches complete all as specified and directed for the folloiwing type point wiring :- Note:-The Quoted rates are including cutting of chases and making good disturbed surfaces

One light/fan point controlled by one way switch

One 3 pin socket outlet point 5 Amp on same board.

One 3 pin socket outlet point 5 Amps on independent board.

All as per item No 53 here-in-before but One 3 pin socket out let 15 Amps on independent board point, with cables 4.0 Sq mm size and earth wire 4.0 sqmm.

Taking down existing sub main wiring of any type and description including removal of teak wood batten/pipe etc complete all as specified and directed.

M&L for sub main wiring with multistranded FRLS copper conductor cable PVC sheathed in and including concealed in brick wall/RCC as per the site condition, providing suitable PVC conduit with all fittings (concealed type) medium grade ISI Marked with two runs of 4.0 Sqmm and one run of 4.0 Sqmm FRLS copper conductor as earth wire and connected to earth dolly complete all as specified and directed. Note:-The Quoted rates are including cutting of chases and making good disturbed surfaces

M&L for sub main wiring with multistranded FRLS copper conductor cable PVC sheathed in and including concealed in brick wall/RCC as per the site condition, providing suitable PVC conduit with all fittings (concealed type) medium grade ISI Marked with two runs of 1.5 Sqmm and one run of 1.5 Sqmm FRLS copper conductor as earth wire and connected to earth dolly all as specified and as directed. Note:-The Quoted rates are including cutting of chases and making good disturbed surfaces

M&L for modular socket outlet 6A, 2/3 pin combined 2 module complete all as specified and directed.

M&L for modular socket outlet 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.

M&L for modular switch 1 way 6 Amps 1 module, suitable for 230 Volts AC supply complete all as specified and directed.

M&L for modular switch 1 way 15/16 Amps 1 module, suitable for 230 Volts AC supply complete all as specified and directed.

M&L for modular white cover plate with frame 3 module complete all as specified and directed.

M&L for modular white cover plate with frame 6 module complete all as specified and directed.

M&L for modular metal flush box 3 module complete all as specified and directed.

M&L for modular metal flush box for 6 module complete all as specified and directed.

M&L for ceiling rose 3 phase/PVC/ polycarbonate isolated body complete all as specified and directed.

M&L for step type elctronic fan regulator modular type, single phase 220 V , two module type complete all as specified and directed.

S & F wall mounted LED batten 20 watt, 2000 lm in a compact batten (57.5 cm), decorative mushroom profile LED lighting fixture with extruded aluminium channel, environmental friendly, energy efficient & integrated electronic driver 230 Volt, AC, single phase, 50 Hz including all accessories prewired including making necessary electrical connection with 3 core copper coductor and testing complete all as specified and directed.

S&F for 2'x2' size LED panel lighting luminaire glare free illumination suitable for false ceiling (armstrong/Grid) fitting size 595x595x70 mm (LXWXH) of 42 watts capacity recess mounting with high brightness SMD LEDs complete all as specified and directed. Make :- Havells model No Pluto Neo Panel 2x2 or in crompton/Philips/Havells

M&L for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps complete all as specified and directed.

Taking down main distribution board of any type incl all accessories removing the same from site and making good the disturbed surface complete all as specified and directed.

M&L for distribution boards in sheet metal enclosure fabricated with CRCA sheet steel, powder coated included with insulated bus bar, neutral bars and earth bars, cement spill protector and colour coded inter connecting wire set, cable ties, blanking plates of double door type suitable for housed for MCB's (D.B) 8 way (SPN) 200 Amps rated bus bar complete all as specified and directed.

M&L for MCB 240 volts SPN 32 amp 'B' curve 10KA breaking capacity, ISI marked, complete all as specified and as directed by EIC. Make :- Indoasian/L&T/Havells

M&L for MCB 240 volts SP 6- 32 amp 'B' curve 10KA breaking, capacity, ISI marked complete all as specified and directed. Make :- L&T/Havells/Legrand

M&L for LED type flood light of 30 watts type, single phase, 230 volts, IP-66 cool white complete fixing to building walls including testing complete all as as specified and directed. Note- Necessary GI bracket of suitable dia and size deemed to be included in quoted rate by the contractor). Make :- Havells model No JETA Quanto Plus or in Crompton/ Philips

S&F ceiling fan of 1200 mm sweep double ball bearing type, 3 blade, 50-60 watts with wide blades for higher air delivery, copper winding, AC, 230 Vols, 50 Hz , BEE 5 Star rating ivory/white in colour complete with ergonomic canopy and down rod complete all as specified and directed. Make - Havells Model No ES-50/Bajaj/Usha

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI wire 4 mm main earthing lead by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 with connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt all around earth plate, test point of phosphorous bronze / gun metal of size 75 mmx 75 mm x25 mm, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 15 mm dia GI light grade earth lead protection pipe complete all as specified and directed. Note:- Earth wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item.

Supply, installation, commissioing and testing wall split units indoor and outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity with 410a refrigerant, 1.5 Ton capacity complete comprising of the following :- (a) Room evaporaive indoor unit with speed blower fan of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water. (b) Out door condensing unit of capacity 18000BTU/Hr capacity with condenser fan motor of appropriate capacity - 01 No air cooled condenser pf 1.5 TR capaicty - 01 No shall be installed out side the building on and including suitable factory made mild steel brackets fixed on wall using fastners for fixing and installation of AC's. (c) Refrigerant copper pipe of suction and discharge line with insulation, condensing water drain pipe & protected by suuitable size of flexzible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing unit with suitable size of copper cable shall be fixed. (d) Making good the distrubed surface to match the existing surface after pluging the holes etc. Note : (i) Cutting holes in walls/window of any thickness for installation of AC etc connection and making good the distrubed surface to match with the thickness for installation of AC etc, connection and unit rate quoted by contractor shall deemed to be inclusive of this aspect. (ii) Electrical cable of required size & length to connect outdoor unit with indoor unit and indoor unit to viltage stablizer is deemed to be included in the quoted rates of contractor. (iii) Copper piping/with insulations and drain piping shall be also deemed to be inclusive in quoted unit rate. MAKE- Blue Star Model No IC518QTX or equivalent of Carrier/ Hitachi/LG/Voltas

Supply and fixing voltage stablizer for automatic operation, single phase, naturally air cooled, indoor type, Copper wound & designed for input variation between 170 V to 280 V with output voltage stabilized at 230 V with accuracy + 2.5% and of capacity 4 KVA completed all as specified and directed. Make:- Bluebird/Volina/Vintek/Voltas/V-Guard

Bee Kay Engineers & Contractors

BRIJ MOHAN LAL AND CO.

POOJA ENTERPRISES

M/S Chhavi Constructions Co

V r traders