Supply, Installation, Testing and Commissioning of Fire Detection and Fire Fighting Systems at Hotel Kalinga Ashok, Bhubaneswar, Odisha

Amount

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Sprinkler System Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required

300 mm dia

200 mm dia

150 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

32 mm dia

25 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

Sidewall type

Pendent type

Conceiled type

Upright Sprinkler

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.

100 mm size

150 mm size

Wet Riser System Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

SITC of landing value (s.s.) type- A, single handed, ISI marked

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Gun metel

20 mm dia bore reinforced rubber of length 36.5mtr fitted with 5mm dia nozzle with a ball valve. The hose reel shall be recessed swinging type with rell drum hose provided with necessary couplings.

Supply & Fixing of 25mm dia ball valve, C.I. class - 125

SITC of draw off connection (s.s.)

Supplying, erection, testing and commissioning of safety valve fitted on the top most point of the wet riser with riser with drain connection inclusive of accessoires etc as required 25 mm dia

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 Way Type

Supply, erection, testing and commissioning of slim seal type butterfly valves with shperoidal graphite iron disc (SG iron), with rubber seal and tested to 10kg / sq.cm including a set of suitable MS flanges, as per IS, bolts, nuts GI washers, rubber gaskets etc., complete. (Intervalve make)

300mm dia.

200mm dia

150mm dia

100mm dia

80 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

300 mm dia

150mm dia

80 mm dia.

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required. Single headed Gunmetal

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

300mm dia

200mm dia

150mm dia

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.

100 mm dia

150mm dia

Supply, erection, testing and commissioning of slim seal type sluice valves with shperoidal graphite iron disc (SG iron), with rubber seal and tested to 10kg / sq.cm including a set of suitable MS flanges, as per IS, bolts, nuts GI washers, rubber gaskets etc., complete. (Intervalve make)

Supplying and fixing air vessel made of 200 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :

80mm dia

100 mm dia

150 mm dia

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required Single headed Gunmeta

Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3 x 35 sq mm

3 x 70 sq mm

3.5 x 150 sq mm

Supplying & Laying of PVC insulated & PVC sheathed/XLPE power Cable of 1.1KV grade of following size on wall surface as required.

3 C x 70 sq mm Armoured Cable

3 Cx 35 sq mm Armoured Cable

3.5 C x 150 sq mm Armoured Cable

First Aid Fire Fighting Appliance Supply, fixing of Following fire extinguishers :-

9 liter Water expelling fire Extinguisher

Abc Powder Type 6 Kg Fire Extinguisher

Co2 Type 4.5 Kg Fire Extinguisher

SITC of Wall mountable Metal First Aid Box/Emergency Medical kit/First Aid Box : Color: Red & White, min Size:290 * 90 * 340 mm(W x D x H) Made from galvanize Metal with 7 Way Processed Powder Coating for Long Lasting Front Heavy Clear acrylic. 4 Partition for medicines organize with lock and 2 set of key Ideal for Offices, Hotel organisation etc..On the top handle for carry to some where.Opening Mechanism-Door Opening Mechanism, Item Shape -Rectangular

LED lit laser etched fire exit sign/Hydrant Sign complete with maintenance free battery of at least 1 hr duration with chrome finish (Double Side)

Misc. Civil Work : Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Protek System and Integrator

SAMEER ENTERPRISES

M/s New Hi-Tech

UMA FIRE SERVICES PVT LTD

NILEX FIRE PROTECTION SYSTEMS

MANAYILS PROJECTS AND ENGINEERS

DIGITEK FIRE SAFETY PVT LTD

Aswin Fire System Private Limited