Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.4 LAccepted-Finance | L1 | Accepted-Finance ADMITTED | |
| 2 | L2₹43.5 L+₹1.0 L (2.46%)Accepted-Finance | L2 | Accepted-Finance ADMITTED | |
| 3 | L3₹44.7 L+₹2.3 L (5.38%)Accepted-Finance | L3 | Accepted-Finance ADMITTED | |
| 4 | L4₹45.3 L+₹2.9 L (6.86%)Accepted-Finance 06 GOVIND NAGAR PANCHAYAT USR TRANSPORT CAMPBELL BAY OLD FISHERMAN COLONY CAMPBELL BAY GREAT NICOBAR ISLANDS | L4 | Accepted-Finance ADMITTED | |
| 5 | L5₹45.5 L+₹3.1 L (7.28%)Accepted-Finance 254 MG ROAD LAMBA LANE JUNGLIGHAT PORT BLAIR SOUTH ANDAMAN ANDAMAN AND NICOBAR ISLANDS 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L5 | Accepted-Finance ADMITTED |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
25 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE (I) CAMPBELL BAY, ARMY LAND, CAMPBELL BAY, GREAT NICOBAR-744302
PROVN OF TRAINING FACILITY AT 154 INF BN (TA) BIHAR, CINCAN LAND AT CAMPBELL BAY
2024_MES_639159_2
8106/E8
Open Tender
Civil Works
Item Rate
180 days
CAMPBELL BAY
PLEASE REFER TENDER DOCUMENT AND NIT
8 documents required · 8 mandatory
₹500
GE (I) CAMPBELL BAY
₹87,000
Yes
28 May 2024
4 Apr 2024
27 Apr 2024
4 Apr 2024
25 Apr 2024
11 Apr 2024
Amount
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil all as specified and as directed.
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc; or for shafts, wells, cess pits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil all as specified and as directed.
Description all as per Item No 2 above but exc 1.5m to 3.0m deep complete all as specified and as directed.
M & L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M & L for use and waste of timber as in formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits of foundation and plinth beam and similar work vertical or to batter for rough finished surfaces of concrete flat all as specified and as directed.
M & L for use and waste of timber as in formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete square, circular, rectangular on plan or polygonal all as specified and as directed.
M & L for RCC M30 (Design Mix) (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M & L for RCC M30 (Design Mix) (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.
M & L for mild steel TMT reinforcement bars 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clip all as specified and as directed.
M & L for mild steel TMT reinforcement bars of 5 mm dia and over up to 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clip all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm all as specified and as directed.
Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and as directed.
M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:6) complete all as specified and directed.
S & F rolled mild steel work as in plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections confirming to Fe 410-W (Gde E-250) quality A complete all as specified and as directed.
S & F mild steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc., confirming to Fe 410-W (Gde E-250) quality A complete all as specified and as directed.
M & L for rolled mild steel sections conforming to Fe 410 -W (Gde E- 250) as in vertical member, main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates all as specified and as directed.
S & F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and as directed.
M & L for 20mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt min 30cm long as required complete all as specified and as directed.
M & L for preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
S & F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 MPa (AZ-150) as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S & F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa (AZ-150) as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M & L for hard core of gauge n.exc 63 mm with broken stone or boulders, deposited, spread and levelled in layers n.exc 15 cm thick, watered and well rammed to a true surface all as specified and as directed.
M & L for providing 50mm thick cement concrete (1:2:4), type B-1 (using 20mm graded stone aggregate) as in flooring complete all as specified and as directed.
M & L for providing 75mm thick cement concrete (1:4:8), type D-2 (using 40mm graded stone aggregate) as in flooring complete all as specified and as directed.
M & L for Glass dividing strips, 3 mm thick inserted in position, conform to design 38mm wide complete all as specified and as directed.
M & L for rendering 15 mm thick in cement plaster (1:4) on fair faces of concrete surfaces, finished fair and even mixed with WPC as per manufacturer's instructions complete all as specified and directed. Note : WPC shall be measured and paid separately.
M & L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10Sqm over new surfaces complete all as specified and as directed.
M & L for 75m mm thick PCC (1:3:6) type C-1, (using 20mm graded stone aggregate) as in plinth protection, pavings, path etc., surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed.
Supply only of integral waterproofing compound of approved make all as specified and as directed.
S & F PVC (SWR) pipes, 150mm bore as in half round gutters including fixing with PVC clamps suitable for non AC sheet roof complete all as specified and as directed.
S & F PVC 150mm dia drop ends / stop end suitable for 150mm half round valley gutters complete all as specified and as directed.
S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.
S & F for PVC (SWR) bends 110mm bore any radius complete all as specified and as directed.
M & L for chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
M/S G S GREWAL
RSL Construction
USR Transport
Kakolil Trade Agencies
T.M.RAMANATHAN AND SONS
KCM BUILDERS & CONSTRUCTIONS (INDIA) PVT.LTD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .