Supply, Installation, Testing and Commissioning of Panic Alarm System (comprising 15 panic call button along with hooter and display units) at Baghajatin SGH, South 24 Parganas under RATTIRER SATHI.

Amount

SITC of Microprocessor based Intelligent addressable Security alarm control panel ( EN54/VDS approved ) fully networkable having requisite numbers of loop with 20% spare capacity with each loop capable of taking requisite number of devices as per latest IS/NBC, 1/4 VGA display character alpha-numeric liquid crystal display.The panel shall be soft addressable type.The panel shall be able to give pin point location of all call/ fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered.The Panel should be able to store sufficient numbers of log events in its Memory as per recommended standards. IS / NBC. Should have the provision for incorporating with BMS.

The panel shall have in built rectifier, provision for external & internal printer ( if required ), Loop cards (no field loop card is allowed), L C D unit to indicate Fire/Fault Signal with address and analog output, complete in all respects, in built Surge protection facility, integral SMF lead acid batteries with sealed cells of 24 V capable of running for 24 hours normal working and then be capable of operating the system for 30 minutes during Emergency condition, with integral battery charger complete as required.

The Panel shall be capable of being networked ( future expansion ) with other similar Panel located at different part of the premises through single RS 485 bus.The Panel shall have provision for interfacing with BMS( RS 485 ). The panel should have modbus output & ready to communicate with remote computer. The system must be preloaded with licenced software. (Approved Make: BOSCH, Model No. AVENAR 2000 or equivalent).

Single Loop Security Alarm Panel.

SITC of Addressable Manual Call Point ( EN54/VDS approved ) soft addressable type with in built fault isolator as per NFPA style 7 wiring complete as required. [ Approved Make: BOSCH, Model No. FMC-210-DM-G-R or equivalent].

Supply & Installatin of Key for Manual Call Point. [ Make :- BOSCH, Model No. FMM-KEY-FORM G/H or Equivalent].

SITC of Addressable Loop Powered Hooter Base complete with inbuilt isolator & IP65 base. ( EN54/VDS approved). [Approved Make: BOSCH, Model No. FMC-420-A-BS-RD or equivalent].

SITC of Addressable Loop Powered Hooter ( sound output of minimum 90 db ) cum strobe (strength of light 10 cd) complete all accessories ( EN54/VDS approved). [ Approved Make: BOSCH, Model No. FNS-420-R or equivalent ].

Supply and laying 20mm dia. FR grade PVC Rigid Conduit Pipe (Precision/ Polycab) on surface of wall, ceiling wilth all accessories e.g. PVC Saddle, Elbow, Tee, Circular Box, Screw, etc. and mending good damages to original finish as per direction of EIC.

Supply & Laying of 2 Core 1.5 sq.mm un-armoured FRLS shielded copper Cable (For Loop) (Make. MEM) in prelaid 20mm NB PVC rigid conduit pipe including necessary terminations at all required as direction of EIC. ( Inside of the building) [ Make: Polycab/RR Kabel/ Finolex].

Computer Gallery (BID ID -5787449)

ATOP ELECTRONICS CORPORATION (BID ID -5769597)