Execution of Renovation of the Office of the DC (Handicrafts), NERO at Guwahati, Assam

SL NO. Description DSR Amount NDSR Amount

2 COST OF SANITARY WORKS ₹ 1,96,034.54 ₹ 3,06,299.50

Grand Total (DSR + NDSR) ₹ 2,27,11,790.59

Grand Total (DSR + NDSR) ₹ 2,27,11,790.59

Digitally signed by DAIPAYAN

Schedule of Quantities - Civil Works

DSR 2023 Particular Qty. Unit DSR Rate DSR Rate DSR Amount NDSR amount

item no./Non with 0.973

DISMANTLING AND DEMOLISION

1/15.57 Dismantling aluminium/ Gypsum partitions, doors, 1331.36 sqm ₹ 56.35 ₹ 65.25 ₹ 86,871.24

windows, fixed glazing and false ceiling including

disposal of unserviceable materialand stacking of

serviceable material with in 50 meters lead as directed

by Engineer-in-charge.

2/15.23 Dismantling tile work in floors and roofs laid in cement 833.19 sqm ₹ 73.40 ₹ 84.99 ₹ 70,812.82

mortar including stacking material within 50 metres

15.23.1 For thickness of tiles 10 mm to 25 mm

WINDOWS/VENTILATION AND DOORS

3/15.12.1 Dismantling doors, windows and clerestory windows 70.00 each ₹ 367.20 ₹ 425.17 ₹ 29,761.90

(steel or wood) shutter including chowkhats, architrave,

holdfasts etc. complete and stacking within 50 metres

15.12.1 Of area 3 sq. metres and below

WINDOWS AND VENTILATION GRILLS

4/15.18 Dismantling steel work in built up sections in angles, 777.60 ₹ 5.65 ₹ 6.54 ₹ 5,085.50

tees, flats and channels including all gusset plates, bolts,

nuts, cutting rivets, welding

etc. including dismembering and stacking within 50

WOODEN RACKS AND PARTITIONS

5/15.14 Dismantling wood work in frames, trusses, purlins and 0.34 cum ₹ 4,459.10 ₹ 5,163.06 ₹ 1,755.44

rafters up to 10 metres span and 5 metres height

including stacking the material within 50 metres lead :

15.14.1 Of sectional area 40 square centimetres and

6/15.7 Demolishing brick work manually/ by mechanical means 12.59 cum ₹ 2,060.20 ₹ 2,385.44 ₹ 30,032.69

including stacking of serviceable material and disposal

of unserviceable material within 50 metres lead as per

direction of Engineer-in-charge.15.7.4 In cement mortar

DISMANTLING OF EXISTING PIPE

7/15.44 Dismantling G.I. pipes (external work) including 18.00 m ₹ 149.80 ₹ 173.45 ₹ 3,122.10

excavation and refilling trenches after taking out the

pipes, manually/ by mechanical means including

stacking of pipes within 50 metres lead as per direction

of Engineer-in-charge :

15.44.1 15 mm to 40 mm nominal bore

FLUSHING CISTERN

8/15.52 Dismantling of flushing cistern of all types 16.00 each ₹ 112.05 ₹ 129.74 ₹ 2,075.84

(C.I./PVC/Vitrious China) including stacking of useful

materials near the site and disposal of unserviceable

materials within 50 metres lead.

DISPOSAL OF RUBBISH

Digitally signed by DAIPAYAN

DSR 2023 Particular Qty. Unit DSR Rate DSR Rate DSR Amount NDSR amount

item no./Non with 0.973

9/15.60 Disposal of building rubbish / malba / similar 300.00 cum ₹ 263.95 ₹ 305.62 ₹ 91,686.00

unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting,

unloading to approved municipal dumping ground or as

approved by Engineer-in-charge, beyond 50 m initial

lead, for all leads including all lifts involved

10/6.12 6.12 Half brick masonry with common burnt clay F.P.S. 84.83 sqm ₹ 931.75 ₹ 1,078.85 ₹ 91,518.85

(non modular) bricks of class designation 7.5 in

foundations and plinth in : 6.12.1 Cement mortar 1:3 (1

cement : 3 coarse sand)

11/8.2 Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished machine-cut

granite stone for kitchen platforms, pantry counters,

vanity counters, window sills, facias and similar

locations of required size, approved shade, colour &

texture, laid over 20 mm thick cement mortar 1:4 joints

treated with white cement, mixed with matching

pigment , epoxy touch up, including rubing , curing,

moulding & polishing of edges to give high gloss finish

etc complete at all levels.

8.2.2 Granite stone slab of colour black, cherry/ruby red

12/8.3 Providing edge moulding to 18 mm thick marble stone

counters, vanities etc including machine polishing to

edge to give high gloss finish etc complete as design

approved by Engineer In charge

TOILET WALL TILE

13/8.31 Providing and fixing Ist quality ceramic glazed wall tiles 175.58 sqm ₹ 1,267.95 ₹ 1,468.12 ₹ 2,57,772.51

conforming to IS: 15622 (thickness to be specified by

the manufacturer), of approved make, in all colours ,

shades except burgundy, bottle green , black of any size

as approved by Engineer-in-Charge, in skirting, risers of

steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade

GRILL IN WINDOWS

14/9.48 Providing and fixing M.S. grills of required pattern in

frames of windows etc. with M.S. flats, square or round

bars etc. including priming coat with approved steel

primer all complete.Fixed to steel windows by welding.

9.48.1 Fixed to steel windows by welding 2960.51 kg ₹ 219.10 ₹ 253.69 ₹ 7,51,051.78

Digitally signed by DAIPAYAN

DSR 2023 Particular Qty. Unit DSR Rate DSR Rate DSR Amount NDSR amount

item no./Non with 0.973

15/9.53 Providing 40X5 mm flat iron hold fast 400 mm long 138.00 each ₹ 228.85 ₹ 264.98 ₹ 36,567.24

including fixing to frame with 10 mm dia bolts, nuts and

wooden plugs and embedding in cement concrete block

16/9.70 ISI Marked Stainless Steel butt hinges with stainless

steel screw complete

17/9.74 Providing and fixing bright finished brass tower bolts 75.00 each ₹ 441.60 ₹ 511.32 ₹ 38,349.00

(barrel type) with necessary screws etc. complete :

18/9.76 Providing and fixing bright finished brass 100 mm 18.00 each ₹ 854.65 ₹ 989.57 ₹ 17,812.26

mortice latch and lock with 6 levers and a pair of lever

handles of approved quality with necessary screw etc

19/9.81 Providing and fixing bright finished brass handles with 14.00 each ₹ 256.65 ₹ 297.17 ₹ 4,160.38

screws etc. complete:

20/9.82 Providing and fixing bright finished brass hanging type 25.00 each ₹ 121.65 ₹ 140.85 ₹ 3,521.25

floor door stopper with necessary screws, etc.

21/9.83 Providing and fixing aluminium die cast body tubular 25.00 each ₹ 1,124.85 ₹ 1,302.43 ₹ 32,560.75

type universal hydraulic door closer (having brand logo

with ISI, IS : 3564, embossed on the body, door weight

upto 35 kg and door width upto 700 mm), with

necessary accessories and screws etc. complete.

22/9.127 Providing & Fixing decorative high pressure laminated

sheet of plain /wood grain in gloss / matt/ suede finish

with high density protective surface layer and reverse

side of adhesive bonding quality conforming to IS : 2046

Type S, including cost of adhesive of approved quality.

9.127.1 - 1.5 mm thick

Digitally signed by DAIPAYAN

DSR 2023 Particular Qty. Unit DSR Rate DSR Rate DSR Amount NDSR amount

item no./Non with 0.973

23/9.147D 9.147D Providing and fixing factory made uPVC white

colour sliding glazed window upto 1.50 m in height

dimension comprising of uPVC multi-chambered

frame with in-built roller track and sash extruded

profiles duly reinforced with 1.60 ± 0.2 mm thick

galvanized mild steel section made from roll

forming process of required length (shape & size

according to uPVC profile), appropriate dimension of

uPVC extruded glazing beads and uPVC extruded

interlocks, EPDM gasket, wool pile, zinc alloy (white

powder coated) touch locks with hook, zinc alloy body

with single nylon rollers (weight bearing capacity to be

40 kg), G.I fasteners 100 x 8 mm size for fixing frame to

finished wall and necessary stainless steel screws

etc. Profile of frame & sash shall be mitred cut and

fusion welded at all corners, including drilling of holes

for fixing hardware's and drainage of water etc. After

fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon

sealent over backer rod of required size and of

approved quality, all complete as per approved

drawing & direction of Engineer-in-Charge. (Single /

double glass panes, wire mesh and silicon sealent shall

be paid separately). Variation in profile dimension in

higher side shall be accepted but no extra payment

on this account shall be made.

9.147.A1 Two Track two panels slidining window with aluminium

channel for roller track, wool pile, nylon roller with SS

9.147.A1.3 Using R4 series with frame (64mm & above) x (45mm & 70.38 sqm ₹ 9,628.60 ₹ 11,148.67 ₹ 7,84,643.39

above) & sash (44mm & above) x (55 mm& avove) with

zinc alloy (zamak) powder coated handles on every

panel along with multi-point locking system (height

9.147.A5 Three track panels sliding window with aluminium

channels for roller track, wool pile, nylon roller with SS

9.147.A5.3 Using R4 series with frame (115mm & above) x (45mm 40.32 sqm ₹ 9,888.35 ₹ 11,449.42 ₹ 4,61,640.61

& above) & sash (44mm & above) x (55 mm& avove)

with zinc alloy (zamak) powder coated handles on every

panel along with multi-point locking system (height

9.147.D1 Ventilator casement window single panel with or

without fixed panel with S.S 304 friction hinges as per

size and weight of sash, single point locking zinc alloy

(zamak) powder coated handles.

above) & sash /mullion (33 mm & above)x (50mm &

above). Height upto 0.90 metre.

Digitally signed by DAIPAYAN

DSR 2023 Particular Qty. Unit DSR Rate DSR Rate DSR Amount NDSR amount

item no./Non with 0.973

24/11.3 Cement concrete flooring 1:2:4 finished with a floating

coat of neat cement , including cement slurry, but

excluding the cost of nosing of steps etc complete

11.3.1 40 mm thick with 20 mm nominal size stone aggregate 71.52 sqm ₹ 614.20 ₹ 711.16 ₹ 50,862.16

25/11.33 2 5 mm wooden planking, tongued and grooved in 75.17 sqm ₹ 4,508.95 ₹ 5,220.78 ₹ 3,92,446.03

flooring, including fixing with iron screws complete with

:11.33.1 Second class teak wood

TOILET FLOOR TILE

26/11.41A.3.1 Glazed Vitrified tiles Matt/Antiskid finish of size 28.84 sqm ₹ 1,464.85 ₹ 1,696.11 ₹ 48,915.81

27/11.41A Providing and laying Vitrified tiles in floor in different 625.76 sqm ₹ 2,056.90 ₹ 2,381.62 ₹ 14,90,322.53

sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming

to IS:15622, of approved brand & manufacturer, in all

colours and shade, laidon 20 mm thick cement mortar

1:4 (1 cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints with

white cement and matching pigments etc. The tiles

must be cut with the zero chipping diamond cutter only

Laying of tiles will be done with the notch trowel, plier,

wedge, clips of required thickness, leveling system and

rubber mallet for placing the tiles gently and

easily.11.41A.2 Glazed vitrified floor tiles polished finish

of size. 11.41A.2.4 Size of Tile 800 x 1200 mm.

28/11.46 Providing and laying Vitrified tiles in floor in different

sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming

to IS:15622, of approved make in all colour & shade, in

skirting , riser of steps, over 12 mm thick bed of cement

mortar 1:3, jointing with grey cement slurry @ 3.3

kg/sqm including grouting thrre joint with white cement

& matching pigments etc complete.

Digitally signed by DAIPAYAN

DSR 2023 Particular Qty. Unit DSR Rate DSR Rate DSR Amount NDSR amount

item no./Non with 0.973

29/12.45 Providing and fixing false ceiling at all height including 740.19 sqm ₹ 1,529.10 ₹ 1,770.50 ₹ 13,10,506.40

providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of

size 25 mm wide x 1.6 mm thick with flanges of 27 mm

and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x

50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size and

other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200

mm centre to centre, to which the ceiling section 0.5

mm thick bottom wedge of 80 mm with tapered flanges

of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm

long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having

flanges of 20 mm and 30 mm long, the perimeter of

ceiling fixed to wall/partition with the help of rawl plugs

at 450 mm centre, with 25mm long dry wall screws @

230 mm interval, including fixing of gypsum board to

ceiling section and perimeter channel with the help of

dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of

tapered and square edges of the board with

recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering

upto 150 mm on both sides of joint and two coats of

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant

30/12.57 Providing and fixing thermal insulation with Resin 116.87 sqm ₹ 358.50 ₹ 415.10 ₹ 48,512.74

Bonded Fibre glass wool conforming to IS: 8183 having

density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin

Polythene Bags fixed to wall with screw,

rawel plug & washers and held in position by criss

crossing GI wire etc. complete as per directions of

Engineer-in-Charge.

Digitally signed by DAIPAYAN

DSR 2023 Particular Qty. Unit DSR Rate DSR Rate DSR Amount NDSR amount

item no./Non with 0.973

1:4 (1 cement: 4 fine sand)

PAINTING IN WALLS

32/13.48 Finishing with Deluxe Multi surface paint system for 909.85 sqm ₹ 193.70 ₹ 224.28 ₹ 2,04,061.16

interiors and exteriors using Primer as per

manufacturers specifications :

13.48.1 Two or more coats applied on walls @ 1.25

ltr/10 sqm over and including one coat of Special primer

applied @0.75 ltr /10 sqm

PAINTING IN GRILLS

13.50 Applying priming coat:

33/13.50.3 With ready mixed red oxide zinc chromate primer of 117.41 sqm ₹ 67.40 ₹ 78.04 ₹ 9,162.68

approved brand and manufacture on steel galvanised

iron/ steel works

34/13.62 Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade :

13.62.1 Two or more coats on new work 117.41 sqm ₹ 226.25 ₹ 261.97 ₹ 30,757.90

35/13.80 Providing and applying white cement based putty of 909.85 sqm ₹ 156.05 ₹ 180.69 ₹ 1,64,400.80

average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall

surface to prepare the surface even and smooth

36/26.86 Providing and fixing factory made single extruded WPC

(Wood Polymer Composite) solid

door/window/clerestory windows & desertory other

Frames/Chowkhat comprising of virgin PVC polymer of K

value 58-60 (Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat husk)

and non toxic additives (maximum toxicity index of 12

for 100 gms) fabricated with miter joints after applying

PVC solvent cement and screwed with full body

threaded star headed SS screws having minimum frame

density of 750 kg/cum, screw withdrawal strength of

2200 N (Face) & 1100 N(Edge), minimum compressive

strength of 58 N/mm2, modulus of elasticity 900

N/mm2 and resistance to spread of flame of Class A

category with property of being termite /borer proof,

water/moisture proof and fire retardant and fixed in

position with M.S hold fast/lugs/SS dash fasteners of

required dia and length complete as per direction of

Engineer-In- Charge. (M.S hold fast/lugs or SS dash

fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5mm

tolerance in dimensions i.e depth and width of profile

shall be acceptable. Variation in profile dimensions on

plus side shall be acceptable but no extra payment on

this account shall be made.

Digitally signed by DAIPAYAN

DSR 2023 Particular Qty. Unit DSR Rate DSR Rate DSR Amount NDSR amount

item no./Non with 0.973

37/26.88 Providing and fixing factory made single extruded WPC 57.96 sqm ₹ 4,764.20 ₹ 5,516.32 ₹ 3,19,725.91

(WoodPolymer Composite) solid decorative type flush

door shutter of required size comprising of virgin

polymer of K value 58-60 (Suspension Grade), calcium

carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) having minimum

density of 650 kg/cum and screw withdrawal strength of

1800 N (Face) & 900 N (Edge), minimum compressive

strength 50 N/ mm2, modulus of elasticity 850 N/mm2

and resistance to spread of flame of Class A category

with property of being termite/ borer proof,

water/moisture proof and fire retardant. WPC to be

laminated with PVC foil of minimum 14 microns thick of

approved design pasted with hot melt adhesive on both

faces of shutter and fixing with stainless steel butt

hinges of required size with necessary full body

threaded star headed counter sunk S.S screws, all as per

direction of Engineer-In- Charge. (Note: stainless steel

butt hinges and necessary S.S screws shall be paid

26.88.1 - 30 mm thick

FRAME FOR WOOD PANELLING

38/NS1 Providing and fixing wood work in frames for false 1231.55 sqm ₹ 438.00 ₹ 5,39,419.94

ceilings, partitions, wall linings and similar works using

approved quality 25 mm thick premium BWR Grade

plywood conforming to IS 303 , cut to the required sizes

and shapes, including all necessary sawing, planning,

drilling, notching and fitting, fixed true to line, level and

plumb in position with approved stainless steel screws

of suitable size and gauge. The plywood shall be free

from warping, cracks, delamination and other defects,

and shall be properly aligned and securely fastened to

the supporting framework as per approved drawings

and directions of the Engineer-in-Charge. All edges shall

be neatly finished, joints made tight and flush, and the

completed work shall be rigid, stable and capable of

receiving the specified finishing treatment. The rate

shall include the cost of all materials, labour, tools and

tackles, cutting wastage, handling, lifting,

transportation and all incidental charges required for

the satisfactory completion of the work.

PLY WOOD PANELLING IN CEILING AND WALLS

Digitally signed by DAIPAYAN

DSR 2023 Particular Qty. Unit DSR Rate DSR Rate DSR Amount NDSR amount

item no./Non with 0.973

39/NS2 Providing and fixing wall lining using premium quality 19 1297.75 sqm ₹ 2,421.00 ₹ 31,41,858.81

mm thick flat pressed three-layer medium density

Moisture Resistant (MR) Grade plywood conforming to

IS 12823, Grade-I, Type-II and ISI marked, fixed over the

specified framework with approved stainless steel

screws at required spacing, ensuring the lining is true to

line, level and plumb. The plywood shall be free from

defects such as warping, splitting, delamination or

surface irregularities and shall have balancing

lamination on the reverse side to prevent distortion.

The unexposed face and edges shall be treated with one

coat of approved wood primer before fixing. All joints

shall be neatly aligned, screw heads countersunk, and

exposed surfaces prepared smooth and ready to receive

the specified finish. The work shall include all cutting,

shaping, drilling, fitting, fastening, handling, lifting,

scaffolding, tools and tackles, wastage and incidentals

necessary for completing the wall lining in a sound &

rigid as directed by the Engineer-in-Charge.

ACOUSTIC TAP PANELLING IN WALLS

40/NS3 Providing, fitting and fixing approved quality channeled 174.28 sqm ₹ 6,792.00 ₹ 11,83,709.76

woodwork perforated acoustic panels of size 192 mm

width × 15 mm thickness × 2400 mm length,

manufactured from moisture-resistant fibreboard

substrate with factory-laminated decorative facing in

approved shadeand melamine balancing layer on the

reverse side, having specially engineered Helmholtz

fluted perforations of 3 mm width on the back surface

for acoustic performance. The panels shall be fixed over

the approved aluminium/wooden framework with

concealed clips, screws or fixing accessories as

recommended by the manufacturer, ensuring proper

alignment, level, plumb and uniform joint pattern. The

supporting framework shall be rigid and securely

anchored to the wall or ceiling, and where specified, All

cut edges shall be neatly finished, joints kept uniform,

and the completed installation shall be free from

warping, gaps, dents or surface defects. The work shall

include all materials, fittings, fixtures, cutting, handling,

lifting, scaffolding, tools and tackles, wastage and

incidental operations required for complete installation

as per the approved drawings, manufacturer's

specifications and directions of the Engineer-in-Charge.

Digitally signed by DAIPAYAN

DSR 2023 Particular Qty. Unit DSR Rate DSR Rate DSR Amount NDSR amount

item no./Non with 0.973

41/NS4 Providing, supplying and fixing premium quality roller 110.70 sqm ₹ 4,504.00 ₹ 4,98,593.15

blind system comprising circular extruded aluminium

roller tube manufactured from Aluminium Alloy 63400,

Temper WP, of suitable diameter and thickness to

ensure smooth operation and resistance to deflection,

complete with flat-shaped extruded aluminium bottom

rail of the same alloy and temper for proper fabric

tension and alignment. The system shall include a high-

quality side operating mechanism with 2 mm diameter

endless ball chain cord having moulded plastic balls,

designed for smooth, noiseless and effortless raising

and lowering of the blinds. All plastic components,

including chain connectors, brackets, end caps, clutches

and accessories, shall be manufactured from UV-

stabilized compounds in white colour, resistant to

fading, cracking and deformation due to prolonged

exposure to sunlight. The roller blinds shall be installed

true to line and level using manufacturer-approved

brackets and stainless steel fasteners securely anchored

to walls, ceilings or window frames as specified. The

complete installation shall ensure smooth operation,

proper fabric tracking, uniform rolling, and freedom

from vibration, sagging or misalignment. The rate shall

include all materials, accessories, hardware, fixing

arrangements, cutting, handling, transportation, labour,

tools and tackles, testing and commissioning, and all

incidental works required for a complete and

satisfactory installation as per approved drawings,

manufacturer's recommendations and the directions of

the Engineer-in-Charge.

42/NS5 Providing and fixing 19 mm thick BWR (Boiling Water 71.52 sqm ₹ 1,669.00 ₹ 1,19,367.23

Resistant) Grade plywood conforming to IS 303 for sub-

flooring below wooden flooring, of approved make and

quality, cut to the required sizes and laid over the

prepared floor surface or supporting framework as

specified. The plywood shall be free from warping,

delamination, cracks and other defects, and shall be

fixed securely in position with approved stainless steel

screws at suitable spacing, ensuring a rigid, level and

stable sub-floor. The boards shall be laid with staggered

joints, maintaining uniform gaps where required for

expansion, and all joints shall be properly aligned and

flush to provide an even surface for the subsequent

wooden flooring finish. Necessary cutting, fitting

around columns, walls and service penetrations,

countersinking of screws, edge finishing, handling,

lifting and protection of the completed work shall be

included. The finished sub-floor shall be true to line and

level, free from movement, squeaking or unevenness,

and ready to receive the specified wooden flooring,

complete in all respects as per approved drawings and

directions of the Engineer-in-Charge.

Grand Total of Civil works ₹ 1,00,38,885.74 5482948.89

Grand Total of Civil works ₹ 1,00,38,885.74 5482948.89

Digitally signed by DAIPAYAN

Schedule of Quantities - Plumbing & Sanitary works

DSR 2023/NDSR Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

item 0.973 GST

correction and 19%

17.68 Providing and fixing vitreous china dual purpose closet suitable 2.00 each ₹ 11,847.65 ₹ 13,718.04 ₹ 27,436.08

for use as squatting pan or European type water closet (Anglo

IndianW.C pan) with seat & lid fixed with C.P. brass hinges and

rubber buffers, 10 litre low level flushing cistern with fitting and

brackets, 40mm flush bend, 20 mm over flow pipe, with

specials of standard make and mosquito proof coupling of

approved municipal designcomplete, including painting of

fittings and brackets, cutting and making good the walls and

floors wherever required: 17.68.1 White vitreous china dual

purpose WC pan with white solid plastic seat and lid with white

vitreous china flushing cistern and C.P. flush bend.

17.5/17.5.2 17.5 Providing and fixing white vitreous china flat back half stall 3.00 each ₹ 18,008.75 ₹ 20,851.79 ₹ 62,555.37

urinal of size 580x380x350 mm with white PVC automatic

flushing cistern, with fittings, standard size C.P. brass flush pipe,

spreaders withunions and clamps (all in C.P. brass) with waste

fitting as per IS :2556, C.I. trap with outlet grating and other

couplings in C.P. brass,including painting of fittings and cutting

and making good the walls and floors wherever required :

17.5.2 Range of two half stall urinals with 5 litre

P.V.C.automatic flushing cistern

18.8/18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 157.44 rm ₹ 537.60 ₹ 622.47 ₹ 98,001.68

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Charge.Concealed work, including cutting chases and making

good the walls etc.

18.8.2 20 mm nominal dia Pipes

17.10/17.10.1/17.10.1.1 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) 1.00 each ₹ 6,945.00 ₹ 8,041.41 ₹ 8,041.41

kitchen sink as per IS:13983 with C.I. brackets and stainless

steel plug 40 mm,including painting of fittings and brackets,

cutting and making good the walls wherever required : 17.10.1

Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl

EUROPEAN CLOSET

Digitally signed by DAIPAYAN

DSR 2023/NDSR Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

item 0.973 GST

correction and 19%

NS-S1 Supplying, installing, testing and commissioning approved 3.00 each ₹ 20,715.00 ₹ 62,145.00

quality vitreous china wall-hung European water closet (EWC)

complete with matching seat and cover, heavy-duty CP brass

hinges, rubber buffers, concealed fixing arrangement and all

necessary accessories. The WC shall be fixed firmly on the wall

with suitable heavy-duty brackets and anchor fasteners capable

of safely carrying the imposed load. The work shall include

supplying and fixing a 10-litre wall-embedded or wall-mounted

flushing cistern complete with internal flushing mechanism,

float valve, brackets, fittings, 40 mm flush bend, 20 mm

overflow pipe, mosquito-proof coupling and all necessary

specials and accessories of approved make. Necessary

connections to the water supply and soil/waste system shall be

made with leak-proof joints, including cutting, chasing, drilling

and making good the walls, floors and finishes wherever

required. All exposed metal fittings and brackets shall be

protected with approved paint or anti-corrosive treatment as

specified. After installation, the complete system shall be

tested for proper alignment, stability, flushing efficiency, water-

tightness and smooth operation of all components, ensuring

there is no leakage, seepage, vibration or malfunction. The

work shall be carried out strictly in accordance with approved

drawings, manufacturer's recommendations, relevant IS

standards and the directions of the Engineer-in-Charge, and

shall include all materials, labour, tools, tackles, transportation,

testing and commissioning required for satisfactory

VANITY COUNTER BASIN

NS-S2 Providing, supplying, installing, testing and commissioning 6.00 each ₹ 32,009.00 ₹ 1,92,054.00

premium grade wall-mounted ceramic vanity basin with

cabinet of size 600 mm × 500 mm × 600 mm, complete with

one drawer and one shelf, manufactured from moisture-

resistant board finished with 1 mm thick approved Laminates in

approved shade and texture with matt finish, including all

necessary hardware fittings, soft-close channels, handles,

supports and accessories. The ceramic wash basin shall be of

premium quality, free from cracks, chips and surface

imperfections, and shall be securely fixed over the cabinet with

approved sealant and fixing arrangements. The item shall also

include a 600 mm × 600 mm LED mirror with integrated

illumination, complete with electrical connections, mounting

accessories and concealed wiring as required. The vanity unit

shall be fixed true to line, level and plumb using suitable wall

anchors and brackets, ensuring adequate support and stability.

Necessary drain fittings suitable for wall or floor outlet

connections, waste coupling, bottle trap or approved trap

arrangement, water supply connections and all associated

accessories depending on requirement shall be provided for

complete functionality. The work shall include painting or anti-

corrosive treatment of exposed fittings and brackets where

required, cutting, chasing, drilling and making good walls, floors

and finishes, sealing all joints to prevent water ingress, and

thorough testing for proper drainage, leak-proof performance,

stability and satisfactory operation. The completed installation

shall conform to approved drawings, manufacturer's

specifications and the directions of the Engineer-in-Charge, and

Digitally signed by DAIPAYAN

DSR 2023/NDSR Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

item 0.973 GST

correction and 19%

NS-S3 Providing and fixing approved quality chrome-finished 5.00 each ₹ 915.06 ₹ 4,575.28

rectangular towel ring measuring 215 mm in length and 200

mm in width, maintaining a minimum clearance of 37 mm from

the wall face, manufactured from high-quality brass or stainless

steel with a durable chrome-plated finish, weighing not less

than 100 grams, complete with concealed fixing arrangement,

mounting plate, screws, wall plugs and all necessary

accessories. The towel ring shall be installed at the approved

location, true to line, level and plumb, firmly anchored to

masonry, concrete or finished wall surfaces using suitable

fasteners to ensure rigidity and long-term stability. The chrome

finish shall be uniform, free from scratches, pits, stains or other

defects, and all visible surfaces shall be properly protected

during installation. The work shall include marking, drilling,

fixing, alignment, cleaning of the installed fixture, making good

any minor damage to wall finishes caused during installation,

and all labour, materials, tools, tackles and incidental works

required for complete installation. The finished towel ring shall

be secure, properly aligned, corrosion-resistant and ready for

use, complete in all respects as per the manufacturer's

specifications and the directions of the Engineer-in-Charge.

NS-S4 Providing and fixing approved quality metal chrome-finished 4.00 each ₹ 1,399.55 ₹ 5,598.20

towel rail complete with brackets and concealed fixing

arrangement, having an overall length of 570 mm, usable rail

length of 525 mm, width of 78 mm, effective height of 88 mm,

and weighing not less than 170 grams, manufactured from high-

quality brass or stainless steel with a durable corrosion-

resistant chrome-plated finish. The towel rail shall be securely

fixed to properly seasoned wooden cleats or suitable backing

supports using CP brass screws, wall plugs and concealed

mounting hardware, ensuring firm anchorage and long-term

stability. The fixture shall be installed true to line, level and

plumb at the designated location, maintaining proper

projection and alignment from the wall surface. The chrome

finish shall be smooth, uniform and free from scratches, pits,

stains or other defects, and all exposed surfaces shall be

protected during installation. The work shall include marking,

drilling, fixing, alignment, tightening of fittings, cleaning of the

fixture after installation, making good any minor damage to

adjacent finishes, and providing all materials, accessories,

labour, tools and tackles necessary for complete installation.

TWO WAY BIB COCK

Digitally signed by DAIPAYAN

DSR 2023/NDSR Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

item 0.973 GST

correction and 19%

NS-S5 Providing and fixing approved quality metal chrome-finished 5.00 each ₹ 1,589.15 ₹ 7,945.74

two-way bib cock of 20 mm nominal bore, manufactured from

high-grade brass and finished with a durable chromium plating,

conforming to relevant IS standards . The bib cock shall be fixed

at the designated location and connected to the water supply

line with approved fittings, nipples, sockets, PTFE tape and

accessories required to ensure leak-proof joints. The

installation shall be carried out carefully to maintain proper

alignment, projection and accessibility for operation and

maintenance. The chrome finish shall be uniform, smooth and

free from defects such as scratches, pits or peeling. After

installation, the bib cock shall be tested under working water

pressure to ensure smooth operation of the spindle, proper

functioning of both outlets and complete water-tightness

without leakage from the body, spindle or joints. The work shall

include all cutting, threading, fitting, tightening, testing,

cleaning, protection of fittings, making good any minor damage

to surrounding finishes, and providing all materials, labour,

tools, tackles and incidental works necessary for complete and

satisfactory installation as per the manufacturer's specifications

and the directions of the Engineer-in-Charge.

NS-S6 Providing and fixing 8 mm dia Health faucet with flexible tube 5.00 each ₹ 1,508.51 ₹ 7,542.53

upto 1 metre long with S.S. triangular plate to Eureopean type

W.C. of quality and make as approved by Engineer - in - charge

and as directed by the department.

NS-S7 NS-S7 Providing and fixing of glass soap dispenser as approved 6.00 each ₹ 1,281.48 ₹ 7,688.91

by Engineer - in - charge and as directed by the department.

NS-S8 NS-S8 Providing and fixing approved quality metal chrome- 7.00 each ₹ 1,962.55 ₹ 13,737.84

finished corrosion-resistant pillar tap suitable for wash basins

and kitchen sinks, manufactured from high-grade brass with a

durable chromium-plated finish, conforming to relevant IS

standards and approved by the Engineer-in-Charge. The pillar

tap shall be installed at the designated location and securely

fixed to the basin or sink through the pre-formed hole using the

manufacturer's recommended locking arrangement, washers,

nuts and accessories. The tap shall be connected to the water

supply line through approved flexible connectors, angle valves

or fittings as required, ensuring leak-proof joints with PTFE tape

and suitable sealing materials. The chrome finish shall be

smooth, uniform and free from scratches, pits, cracks or other

defects, and the operating mechanism shall function smoothly

without excessive force. After installation, the tap shall be

tested under working water pressure to ensure proper flow,

smooth operation and complete water-tightness without

leakage from the body, spindle or connections. The work shall

include all materials, fittings, fixing accessories, cutting,

threading, tightening, testing, cleaning, making good any minor

damage to adjacent finishes, and all labour, tools and tackles

necessary for complete and satisfactory installation as per the

manufacturer's specifications and the directions of the

Engineer-in-Charge.

Digitally signed by DAIPAYAN

DSR 2023/NDSR Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

item 0.973 GST

correction and 19%

NS-S9 Providing, fitting and fixing PVC Nahani Trap of 110 mm × 75 14.00 each ₹ 358.00 ₹ 5,012.00

mm diameter of approved make and quality, manufactured

from virgin PVC conforming to relevant IS standards, complete

with removable grating, water seal and all necessary fittings

and accessories. The trap shall be installed at the designated

location in the floor, properly aligned with the waste water

drainage system and connected to the PVC waste pipe using

approved solvent cement and fittings to ensure a rigid and leak-

proof joint. The trap shall be fixed at the correct level and

gradient to facilitate smooth and efficient drainage without

stagnation of water. Necessary cutting, chasing and making

good of floors and surrounding finishes shall be carried out

wherever required. After installation, the trap and connected

pipework shall be tested for proper flow, water seal retention

and leak-proof performance. The completed installation shall

be neat, secure, free from defects and blockages, and ready for

use, including all materials, labour, tools, tackles and incidental

works required for satisfactory completion in accordance with

the manufacturer's specifications and the directions of the

Engineer-in-Charge.

Grand total of Plumbing & Sanitary Works ₹ 1,96,034.54 ₹ 3,06,299.50

Grand total of Plumbing & Sanitary Works ₹ 1,96,034.54 ₹ 3,06,299.50

Digitally signed by DAIPAYAN

Schedule of Quantities - E & M works

DSR/Non Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

DSR item 0.973 GST

1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

surface / recessed medium class PVC conduit, with modular switch,

modular plate, suitable GI box and earthing the point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable etc. as

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the ₹ -

following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed medium class PVC conduit as required

1.14.11 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid 1290.00 Metre ₹ 47.00 ₹ 54.42 ₹ 70,201.80

copper conductor PE insulated, shielded with fine tinned copper braid

and protected with PVC sheath in the existing surface/ recessed steel/

PVC conduit as required.

1.22 Supplying and fixing metal box of following sizes (nominal size) on ₹ -

surface or in recess with suitable size of phenolic laminated sheet

cover in front including painting etc. as required.

1.24 Supplying and fixing following modular switch/ socket on the existing ₹ -

modular plate & switch box including connections but excluding

modular plate etc. as required.

1.25 Supplying and fixing two module stepped type electronic fan regulator 20.00 Each ₹ 369.00 ₹ 427.25 ₹ 8,545.00

on the existing modular plate switch box including connections but

excluding modular plate etc. as required.

1.28 Supplying and fixing following Modular base & cover plate on existing ₹ -

modular metal boxes etc. as required.

1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing ₹ -

surface/ recessed Steel/ PVC conduit as required.

2.2 Providing and fixing following rating and breaking capacity and pole ₹ -

MCCB with thermomagnetic release and terminal spreaders in

existing cubicle panel board including drilling holes in cubicle panel,

making connections, etc. as required.

2.4 Supplying and fixing following way, horizontal type three pole and ₹ -

neutral, sheet steel, MCB distribution board, 415 V, on surface/

recess, complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including earthing etc.

as required. (But without MCB/RCCB/Isolator)

Digitally signed by DAIPAYAN

DSR/Non Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

DSR item 0.973 GST

2.5 Supplying and fixing of following ways surface/ recess mounting, ₹ -

vertical type, 415 V, TPN MCB distribution board of sheet steel, dust

protected, duly powder painted, inclusive of 200 A tinned copper bus

bar, common neutral link, earth bar, din bar for mounting MCBs (but

without MCBs and incomer ) as required . (Note : Vertical type MCB

TPDB is normally used where 3 phase outlets are required.)

2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, ₹ -

miniature circuit breaker suitable for inductive load of following poles

in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick 4.00 Set ₹ 13,838.00 ₹ 16,022.61 ₹ 64,090.44

including accessories, and providing masonry enclosure

with cover plate having locking arrangement and watering pipe of 2.7

metre long etc. with charcoal/ coke and salt as required.

5.8 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below 40.00 Metre ₹ 972.00 ₹ 1,125.45 ₹ 45,018.00

ground as strip earth electrode, including connection/ terminating

with nut, bolt, spring, washer etc. as required. (Jointing shall be done

by overlapping and with 2 sets of brass nut bolt & spring washer

spaced at 50mm)

19.1 Supply, Installation, Testing and Commissioning of 1200 mm sweep, 25.00 Each ₹ 2,730.00 ₹ 3,160.99 ₹ 79,024.75

BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)

Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2

nos. canopies, shackle kit, safety rope, copper winding, Power Factor

not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery

minimum 210Cum/Min , 350 RPM (tolerance as per IS : 374-2019),

THD less than 10%, remote or electronic regulator unit for speed

control and all remaining accessories including safety pin, nut bolts,

washers, temperature rise=75 degree C (max.), insulation resistance

more than 2 mega ohm,suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as required.

NS-E1 Supply, installation, testing and commissioning of 4 kVA automatic 13.00 each ₹ 5,071.00 ₹ 65,923.00

voltage stabilizer suitable for 1.5 TR air-conditioner, designed to

operate within an input voltage range of 130 V to 280 V AC, 50 Hz and

provide a stabilized output voltage of 220–240 V AC with an accuracy

of ±5% . The stabilizer shall be of servo-controlled or microprocessor-

based automatic voltage correction type, incorporating high and low

voltage cut-off protection, overload protection, short-circuit

protection, thermal protection, intelligent time-delay system for

compressor safety, surge suppression and digital voltage display for

input and output monitoring. The unit shall have a minimum

efficiency of 95%, copper wound transformer, high-grade electrical

components and a robust powder-coated metal enclosure with

adequate ventilation. The stabilizer shall be securely wall-mounted or

floor-mounted as approved and connected to the air-conditioner

circuit using suitably sized FRLS copper conductors, cable lugs, glands

and proper earthing arrangements. All electrical connections shall

conform to relevant IS standards and manufacturer's

recommendations. The item shall include all accessories, mounting

hardware, wiring connections, testing and commissioning complete as

approved, specified and directed by the Engineer-in-Charge.

Digitally signed by DAIPAYAN

DSR/Non Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

DSR item 0.973 GST

NS-E2 Supply, installation, testing and commissioning of 5 kVA automatic 14.00 each ₹ 5,663.00 ₹ 79,282.00

voltage stabilizer suitable for 2 TR air-conditioner, designed to

operate within an input voltage range of 130 V to 280 V AC, 50 Hz and

provide a stabilized output voltage of 220–240 V AC with an accuracy

of ±5% . The stabilizer shall be of servo-controlled or microprocessor-

based automatic voltage correction type, incorporating high and low

voltage cut-off protection, overload protection, short-circuit

protection, thermal protection, intelligent time-delay system for

compressor safety, surge suppression and digital voltage display for

input and output monitoring. The unit shall have a minimum

efficiency of 95%, copper wound transformer, high-grade electrical

components and a robust powder-coated metal enclosure with

adequate ventilation. The stabilizer shall be securely wall-mounted or

floor-mounted as approved and connected to the air-conditioner

circuit using suitably sized FRLS copper conductors, cable lugs, glands

and proper earthing arrangements. All electrical connections shall

conform to relevant IS standards and manufacturer's

recommendations. The item shall include all accessories, mounting

hardware, wiring connections, testing and commissioning complete as

approved, specified and directed by the Engineer-in-Charge.

NS-E3 Supply, installation, testing and commissioning of 25 Ampere AC 27.00 each ₹ 918.00 ₹ 24,786.00

Starter suitable for single-phase or three-phase air-conditioning units

as specified, comprising heavy-duty electromagnetic contactor rated

for 25 A, thermal overload relay with adjustable current setting,

start/stop push buttons, auxiliary contacts, and a dust and moisture-

resistant sheet steel or polycarbonate enclosure of minimum IP-42

protection class. The starter shall operate on 230 V/415 V, 50 Hz AC

supply as required and shall conform to relevant IS standards such as

IS 13947 for low-voltage switchgear and control gear. The contactor

contacts shall be made of high-conductivity silver alloy for reliable

switching performance, and the overload relay shall provide

protection against overload, phase failure and single phasing

wherever applicable. The starter shall be securely mounted on the

wall or designated support and connected using suitable size FRLS

insulated copper conductors, cable lugs, glands and earthing

arrangements. All terminations shall be properly tightened and

identified. The item shall include all accessories, mounting hardware,

wiring connections, testing and commissioning complete as per

manufacturer's specifications and the directions of the Engineer-in-

NS-E4 Supply, installation, testing and commissioning of 6-Watt Full Glow 80.00 each ₹ 748.00 ₹ 59,840.00

Round LED Surface Downlighter suitable for ceiling mounting,

comprising a high-efficiency LED light source with a minimum efficacy

of 100 lumens/Watt, operating on 220–240 V AC, 50 Hz supply, with a

power factor not less than 0.90, THD less than 10%, and a correlated

colour temperature (CCT) of 3000K/4000K/6500K as approved. The

luminaire housing shall be manufactured from high-quality powder-

coated aluminium or polycarbonate with a high-transmittance opal

diffuser ensuring uniform full-glow illumination and glare-free light

distribution. The LED driver shall be inbuilt, constant-current type,

surge protected, and capable of stable operation under voltage

fluctuations. The fixture shall have a minimum colour rendering index

(CRI) of 80, beam angle of not less than 110°, and an average rated life

of 50,000 burning hours. The fitting shall be securely surface-

mounted on the ceiling with suitable screws and anchors, connected

through FRLS copper wiring and properly earthed wherever

applicable. The item shall include all accessories, mounting hardware,

wiring connections, testing and commissioning complete as per

relevant IS standards, manufacturer's recommendations and

directions of the Engineer-in-Charge.

Digitally signed by DAIPAYAN

DSR/Non Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

DSR item 0.973 GST

NS-E5 Supply, installation, testing and commissioning of 12-Watt Round LED 220.00 each ₹ 895.00 ₹ 1,96,900.00

Surface Downlighter suitable for ceiling mounting, complete with high-

efficiency LED module, integrated constant-current electronic driver,

diffuser, mounting base and all necessary accessories. The luminaire

shall operate on 220–240 V AC, 50 Hz supply, with a minimum power

factor of 0.90, system efficacy not less than 100 lumens/Watt, and

Cool Day Light (CDL) colour temperature of 6500K ± 500K. The

housing shall be made of high-quality powder-coated aluminium or

flame-retardant polycarbonate with a high-transmittance opal

diffuser to provide uniform, glare-free illumination and a beam angle

of not less than 110°. The LED source shall have a minimum CRI of 80,

rated life of 50,000 burning hours, low THD (less than 10%), and

inbuilt surge protection suitable for normal voltage fluctuations. The

fixture shall be securely surface-mounted on the ceiling using

approved screws and anchors and connected through FRLS copper

conductors with proper termination and insulation. The item shall

include all accessories, mounting hardware, wiring connections,

testing and commissioning complete in accordance with relevant IS

standards, manufacturer’s specifications and the directions of the

Engineer-in-Charge.

NS-E6 Supply, installation, testing and commissioning of Hi-Wall Split Type 13.00 each ₹ 54,060.00 ₹ 7,02,780.00

Air Conditioner of 1.5 TR capacity, 5-Star Energy Rating, non-ducted

type, complete with indoor unit, outdoor condensing unit, cordless

remote controller, interconnecting refrigerant piping, drain piping,

control wiring and all accessories required for satisfactory operation.

The unit shall operate on 230 V ±10%, single-phase, 50 Hz AC supply

and use of R-32 or equivalent, with a minimum cooling capacity of

approximately 1.5 TR and high energy efficiency conforming to the

latest BEE standards. The indoor unit shall be wall-mounted and

equipped with washable air filters, multi-speed blower, auto swing,

sleep mode, timer function and low-noise operation, while the

outdoor unit shall have a hermetically sealed rotary/inverter

compressor, copper condenser and corrosion-resistant housing. The

installation shall include insulated copper refrigerant tubing, power

and control cabling, condensate drain pipe and all necessary fittings

for a distance of up to 3 metres between indoor and outdoor units,

including mounting brackets, vibration isolators and weather

protection arrangements. All electrical connections shall be made

with suitable size FRLS copper conductors and proper earthing. The

item shall include all materials, accessories, labour, tools, tackles,

testing and commissioning complete in accordance with relevant IS

standards, manufacturer's specifications and the directions of the

Engineer-in-Charge.

Digitally signed by DAIPAYAN

DSR/Non Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

DSR item 0.973 GST

NS-E7 Supply, installation, testing and commissioning of Hi-Wall Split Type 14.00 each ₹ 65,672.00 ₹ 9,19,408.00

Air Conditioner of 2.0 TR capacity, 5-Star Energy Rating, non-ducted

type, complete with indoor unit, outdoor condensing unit, cordless

remote controller, refrigerant piping, drain piping, control cabling and

all associated accessories required for complete operation. The unit

shall operate on 230 V ±10%, single-phase, 50 Hz AC supply and shall

be equipped with a high-efficiency inverter-driven rotary or twin-

rotary compressor using R-32 or equivalent, having a minimum

cooling capacity of approximately 2.0 TR and complying with the

latest BEE 5-Star energy efficiency standards. The indoor unit shall be

wall-mounted and provided with washable filters, multi-speed blower,

auto swing louvers, sleep mode, timer, self-diagnosis and low-noise

operation features. The outdoor unit shall be factory assembled with

copper condenser coil, corrosion-resistant cabinet, vibration isolation

arrangement and suitable weather protection. Installation shall

include insulated copper refrigerant pipes, condensate drain pipe,

interconnecting power and control cables, mounting brackets,

clamps, sleeves and all accessories for a piping distance of up to 3

metres between indoor and outdoor units. All electrical connections

shall be made using suitably sized FRLS copper conductors with

proper earthing and protection. The item shall include all materials,

accessories, labour, tools, tackles, testing and commissioning

complete as per relevant IS standards, manufacturer's specifications

and the directions of the Engineer-in-Charge.

NS-E8 Supply, fitting, fixing, testing and commissioning of hard drawn 87.00 m ₹ 1,605.00 ₹ 1,39,635.00

seamless copper tube having 19.05 mm outside diameter and 0.80

mm wall thickness, manufactured from high-purity copper with

copper content not less than 99%, conforming to JIS H3300 and ASTM

B75 standards, with seamless bright finish, internally carbon-free

surface and capped ends for protection during storage, transportation

and installation. The copper tube shall be corrosion-resistant, suitable

for refrigeration and air-conditioning applications, and compatible

with standard copper fittings and accessories. The tubes shall be laid

true to line and level, securely supported with approved clamps,

hangers and saddles at recommended intervals, ensuring protection

against vibration and mechanical damage. All joints shall be made by

brazing, flaring or crimping using approved techniques and materials,

ensuring leak-proof performance and minimum pressure loss. The

refrigerant line shall be properly insulated where specified and routed

neatly with necessary bends, offsets and supports. The work shall

include all fittings, bends, sleeves, supports, consumables, handling,

transportation, labour, tools and tackles required for complete

installation, testing and satisfactory operation, as directed by the

Engineer-in-Charge.

Digitally signed by DAIPAYAN

DSR/Non Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

DSR item 0.973 GST

NS-E9 Supply, installation, testing and commissioning of LED strip lighting 824.00 m ₹ 282.83 ₹ 2,33,055.37

system for ceiling illumination and decorative purposes, comprising

high-quality flexible LED strips with a minimum efficacy of 100

lumens/Watt, operating on 12V/24V DC through a suitable electronic

driver/adaptor compatible with 220–240V AC, 50 Hz input supply. The

LED strips should have uniform light output, low power consumption,

high colour rendering index (CRI ≥ 80), and colour temperature as

specified (Warm White/Cool White/Neutral White/RGB). The strips

shall be mounted in approved aluminium profiles with diffuser covers

wherever specified and securely fixed within ceiling grooves, coves or

recesses to achieve continuous, glare-free illumination. All wiring shall

be carried out using FRLS insulated copper conductors with proper

connectors, terminals and concealed routing, ensuring electrical

safety and aesthetic appearance. The installation shall include drivers,

connectors, mounting accessories, clips, fixing hardware and all

associated components required for complete operation.

NS-E10 Supply, fitting, fixing, testing and commissioning of 4 kg Capacity ABC 12.00 Each ₹ 4,345.34 ₹ 52,144.11

Dry Powder Fire Extinguisher (Stored Pressure Type), duly ISI marked

and conforming to IS 15683:2018, charged with ISI marked ABC dry

chemical powder conforming to IS 14609, suitable for Class A, B and C

fires, complete with seamless mild steel cylinder, squeeze-grip

operated discharge valve, discharge hose/nozzle, locking pin

arrangement, pressure gauge, wall mounting bracket and

manufacturer's operation manual. The extinguisher shall be designed

for an operating temperature range of -10°C to +55°C, painted with

approved corrosion-resistant finish and permanently marked with

manufacturer’s details, ISI certification mark, capacity, operating

instructions and maintenance requirements. The extinguisher shall be

securely mounted on the wall at the specified location using approved

brackets and fasteners, ensuring easy accessibility and visibility during

emergencies. The work shall include all accessories, mounting

hardware, transportation, handling, testing, commissioning and

certification, complete in all respects, in accordance with IS standards,

fire safety regulations, manufacturer's specifications and the

directions of the Engineer-in-Charge.

Digitally signed by DAIPAYAN

DSR/Non Particular Qty. Unit DSR Rate DSR Rate with DSR Amount NDSR Amount

DSR item 0.973 GST

NS-E11 Supply, fitting, fixing, testing and commissioning of 4.5 kg Capacity 6.00 Each ₹ 7,354.85 ₹ 44,129.11

Carbon Dioxide (CO₂) Fire Extinguisher, duly ISI marked and

conforming to IS 15683, suitable for extinguishing Class B fires and

electrical fires, complete with seamless high-pressure steel cylinder

charged with CO₂ gas, discharge valve of wheel-operated type, flexible

high-pressure delivery hose, non-conductive discharge horn, locking

pin arrangement, safety seal, wall mounting bracket and

manufacturer's operation and maintenance manual. The extinguisher

shall be designed and tested for safe operation under the specified

temperature range and working pressure conditions, with all

components manufactured from corrosion-resistant materials and

finished with approved protective coating. The cylinder shall bear

permanent markings indicating manufacturer’s name, capacity, ISI

mark, test pressure, tare weight, date of manufacture and operating

instructions. The extinguisher shall be securely mounted at the

approved location using suitable brackets and fasteners, ensuring

easy accessibility, visibility and compliance with fire safety

requirements. After installation, the unit shall be inspected for correct

weight, valve operation, hose and horn integrity, locking

arrangement, physical condition and proper mounting. The work shall

include all accessories, mounting hardware, transportation, handling,

testing, commissioning and certification required for complete

installation, in accordance with applicable IS standards, fire safety

regulations, manufacturer's specifications and the directions of the

Engineer-in-Charge.

NS-E12 NS-E12 Supplying, installation, testing & commissioning of main 1.00 job ₹ 4,84,649.45 ₹ 4,84,649.45

control and indicating panel made out of 16 SWG MS sheet to

accommodate the following items duly powder coated in approved

colour with louvers for ventilation, locking arrangement, audio and

visual indication for fire alarm and public address system, monitoring

system including connections, interconnections etc complete as

required. 10 Zone panel for fire alarm system 250 Watt amplifier racks

suitable for operation on 230V AC/24V DC supply conforming to IEC-

268-3 complete with all accessories as required - 2 Nos.(one to act as

standby) Talk back master station with LED PTT (press to talk) push

button for operation on 230V AC/24 V DC supply conforming to IEC-

268 for simplex mode of operation / communication suitable for 20

Nos.talk back unit -1 set. Annoucement control desk suitable for

selection of different zones selectively and ON ALL CALL switch with

visual indication etc. complete as required -1 set. Amplifier change

over switch for inter changing amplifier -1 No. Monitor panel for

loudspeaker complete with output selector, ON / OFF switch, fuse,

visual indications etc. complete as required - 1 No. Main ON / OFF

switch, fuse indication lamps, DC and AC voltmeters & ammeters,

terminal blocks etc. complete as required -1 set.Battery charger

trickle cum boost to take complete load of fire alarm & PA system

complete with all accessories including providing & fixing of 2 nos.12

volt, 60 AH each sealed maintenance free batteries -1 set. as directed

by the department.

Grand total of E & M Works ₹ 36,85,089.51 ₹ 30,02,532.41

Grand total of E & M Works ₹ 36,85,089.51 ₹ 30,02,532.41

Digitally signed by DAIPAYAN