DAY TO DAY MAINT WORKS AND REPAIR AND MAINT OF FOOTPATH PAVER BLOCKS AND OPEN DRAINS AT SI LINES UNDER GE BHOPAL

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

M&L for taking down and refixing in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware etc. complete all as specified and directed.

All as per item No 4.00 above but not exceeding 1 Sqm each, complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed. [MAKE:- Prayag (Cat No.501 Smart flush cistern) or equivalent in PARRYWARE-SLIMLINE/CERA as approved by GE]

S&F in repairs Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size:- 430mm x 510mm x 203mm, bowl size:- 430mm x 380mm x 203mm, including CP waste coupling and 32mm dia PVC waste pipe of suitable length complete all as specified and directed. [MAKE:- Prayag (Cat No.1218D Gloss) or equivalent in NIRALI/BLUE STAR as approved by GE]

S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8328) or equivalent in JAGUAR/MARC as approved by GE]

S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, long neck, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8308) or equivalent in JAGUAR/MARC as approved by GE]

S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8606) or equivalent in JAGUAR/MARC as approved by GE]

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8602) or equivalent in JAGUAR/MARC as approved by GE]

S&F in repairs wash basin mixture, centre hole, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated screwed for iron pipe or for unions 15mm bore, complete all as specified and directed. [MAKE: PRAYAG (Cat.No.7250) or equivalent in MARC/ PLUMBER as approved by GE]

S&F in repairs hand shower (health faucet) with 1.0 mter long braded flexible tube and wall hook complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-85) or equivalent in JAQUAR/MARC as approved by GE]

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. [Make:- Prayag/Polyplast as approved by GE]

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, fixed in repairs complete all as specified and directed.

S&F in repairs tubular towel rail of aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-40) or equivalent in JAQUAR/MARC as approved by GE]

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 50 cm long complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-45) or equivalent in JAGUAR/CERA as approved by GE]

S&F in repairs corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf with chromium plated bracket guard and railing 300mm size complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-46) or equivalent in JAGUAR/CERA as approve by GE]

S&F in repairs Jet spray (butterfly) with 1 mtr tube complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-18) or equivalent in JAQUAR / PLUMBER / MARC as approved by GE]

S&F in repairs Toilet paper holder of mild steel Chromium plated, fixed to walls with chromium plated brass screws complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-38) or equivalent in JAGUAR/CERA as approved by GE]

S&F in repairs Grating round 140 mm size of PTMT (Minimum weight 50 gms) complete all as specified and directed.

S&F in repairs Soap dish disc (oval) type, mild steel Chromium plated of approximate size 100 x 50 x 10 mm complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-45) or equivalent in PARRYWARE-SLIMLINE/CERA as approved by GE]

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Refixing old steel tubing 15 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

Refixing old steel tubing 20 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

S&F in repairs Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. [MAKE:- Prayag or equivalent in JAGUAR/MARC as approved by GE]

S&F in repairs Angular Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. [MAKE:- Prayag or equivalent in JAGUAR/MARC as approved by GE]

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore (minimum weight 90 gms) complete all as specified and directed. [MAKE:-PRAYAG (Cat No.121-F) or equivalent in POLYTUFF/PEARL as approved by GE]

S&F in repairs Nipple suitable for HDPE water tank, 20 mm bore (minimum weight 45 gms) complete all as specified and directed.

S&F in repairs heavy duty, PVC connections 15 mm size with CP nuts of length 450 mm suitable for hot water complete all as specified and directed. [Make:- Prayag/Polyplast as approved by GE]

S&F in repairs vitreous china wash down water closet pan, pedestal pattern, ISI marked, white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. [MAKE:-SOMANY (Cat No.120403 OR 120404) or equivalent in CERA/PARRYWARE/HINDWARE as approved by GE.]

S&F in repairs Vitreous china squatting pan of pattern ‘long pan’, size 580 mm, white with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern excluding flush pipe including provision of cement concrete bedding complete all as specified and directed.

Labour only for repairs of PVC valveless syphonic type flushing low level cistern by making it fuctional complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125 mm size with swivel joints complete all as specified and directed. [MAKE:- Prayag (Cat No.BS-76) or equivalent in JAGUAR/CERA as approved by GE]

S&F in repairs PVC flush pipe 32 mm bore for low level flushing cistern complete all as specified and directed.

S&F in repairs Vitreous china wash basin, ISI marked, white, flat back, size 550 x 400mm, including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. [MAKE:-SOMANY (Cat No.110107) or equivalent in CERA/PARRYWARE /HINDWARE as approved by GE.]

S&F in repairs Vitreous china wash basin, ISI marked, white, Oval type, including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. [MAKE:-HINDWARE (Cat No.10049) or equivalent in CERA/PARRYWARE as approved by GE.]

S&F in repairs PVC float set for flushing cistern of 10 Ltr capacity complete all as specified and directed. [Make:- Prayag/Cera/Hindustan/HR Johnson as approved by GE]

S&F in repairs good quality rubber washer for flushing cistern of 10 Ltr capacity complete all as specified and directed. [Make:- Prayag/Cera/Hindustan/HR Johnson as approved by GE]

S&F in repairs good quality PVC syphone for 10 Ltr capacity complete all as specified and directed. [Make:- Prayag/Cera/Hindustan/HR Johnson as approved by GE]

S&F in repairs wall mixture non-telephonic with crutch for mixing hot & cold water, fancy type, chromium plated, screwed for iron pipe or for unions 15mm bore, complete all as specified and directed. [MAKE:- Prayag (Cat No.7365 or 7265) or equivalent in JAQUAR / PLUMBER / MARC as approved by GE]

S&F in repairs brass spindle of centre hole wash basin mixer, any type for making it non-leaking complete all as specified and directed.

S&F in repairs PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 75 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) junction single (single T), equal or unequal, 75 mm bore complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and directed. [MAKE:-SANT / LEADER / RAMCO / ZOLOTO as approved by GE]

S&F in repairs PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

M&L in replacement salt glazed stoneware drain pipes 150mm bore, grade ‘A’, laid in trenches and jointed as specified complete all as specified and directed.

M&L in repairs sand stone slabs 75 mm thick as in man hole cover stone, etc minimum size 600mm x 1200mm, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and directed.

M&L in repairs sand stone slabs 50 mm thick as in guly trap cover stone, etc minimum size 450mm x 450mm, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and directed.

M&L for Cleaning of spot blockage of IWC/EWC/Gully trap/Nahani trap/floor trap, etc; of any type including cleaning of sludge & removing to out side of residential/bldg or cleaning and removing of spot blockage by any means in between trap and up to Ist manhole of any size and depth; collecting and removal of sludge in pit dug out for the purpose and covering with excaved soil to a distance not exceeding 250 M; with and including cutting/clearing away grass, vegetation, saplings, shrubs, brushwood, undergrowth, roots, etc complete all around of manholes upto a distance 1.2m & along pipe lines both sides upto a distance 2m complete all as specified and directed.

M&L for Cleaning of manholes of any description, size, depth and in any position, mechanically or manually by taking off sludge waste/night soil and silted soil from the existing manhole (after dewatering), collecting and removal of sludge in pit dug out for the purpose and covering with excaved soil to a distance not exceeding 250 M and covering with excaved soil complete all as specified and directed. NOTE:- Measurements will be taken only after dewatering of manholes.

M&L for Puncturing (breaking) of existing RCC/SGSW pipe line of any dia & at any depth between manholes for removing/cleaning blockages in pipe with & including necessary excavation, RFR, collecting and removal of sludge in pit dug out for the purpose and covering with excaved soil to a distance not exceeding 250 M and making good punctured area in cement mortar 1:1 including cutting/clearing away grass, vegetation, saplings, shrubs, brushwood, undergrowth, roots, etc complete all around of manholes upto a distance 1.2m & along pipe lines both sides upto a distance 2m complete all as specified and directed.

Cleaning of existing chocked /blocked sewage lines (burried underground at any depth) of any bore/dia, description and in any position by taking out loose sediments such as sand, girt, ash, sludge water, rags, fibres, vegetation, etc including removal of sludge/debris to a distance exc 250m but n exc 500m complete all as specified and directed.

S&F in repairs flexible PVC waste pipe 32 mm bore suitable for wash basin, etc complete all as specified and directed.

S&F in repairs flexible PVC waste pipe 40 mm bore suitable for kitchen sink, etc complete all as specified and directed.

Opening of air lock/bockage in GI pipe line from outlet of OH water tank to allinternal GI pipes/fittings to obtain smooth & full flow of water by air /gravity pressure from bib taps/ pillar taps/over head shower, etc complete all as specified and directed.

S&F in replacement Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLAST as approved by GE]

S&F in replacement Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLAST as approved by GE]

S&F in repairs 6” overhead shower with 300mm arm & flange complete all as specified and directed. [MAKE:- Prayag (Cat No.BS-79S) or equivalent in JAGUAR/CERA as approved by GE]

S&F in repairs to leaking bib tap/pillar tap/stop valve by replacement of PVC washer of suitable size complete all as specified and directed.

S&F in repairs Bib cock, 2 way double handle with flange, cast copper alloy, chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.7212) or equivalent in JAGUAR/CERA as approved by GE]

S&F in repairs to leaking bib tap/pillar tap/stop valve by replacement of suitable brass spindle & cup complete all as specified and directed.

S&F in repairs bathroom cabinet of hard thermosetting plastic of size 622 x 422 mm, fitted with superior quality distortion free 4 mm thick mirror complete all as specified and directed. [Make: PRAYAG (Model No. 555) or equivalent in NEELKAMAL/ PARRYWARE as approved by GE]

S&F in repairs PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 110 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from water tanks of capacity not exceeding 500 litres and from mouth of circulating pipes, etc complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from water tanks of capacity not exceeding 1000 litres and from mouth of circulating pipes, etc complete all as specified and directed.

M&L for grinding & polishing on existing old marble/mossaic/terrazo/ kota stone surfaces including filling all existing joints with grey cement slurry mixed with pigment to match the shade of slab complete all as specified and directed..

Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brickwork/stone masonry built in cement or cement lime mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed..

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed.

M&L for vitrified light shade flooring tiles 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, laid in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. [MAKE: SOMANY/KAJARIA/ORIENT as approved by GE]

M&L for vitrified light shade tiles 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/KAJARIA/ORIENT as approved by GE]

M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:4 complete all as specified and directed. [MAKE: SOMANY/KAJARIA/ORIENT as approved by GE]

M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/KAJARIA/ORIENT as approved by GE]

M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/KAJARIA/ORIENT as approved by GE]

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, moulding and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. [MAKE:-JOHNSON ENDURA or equivalent in SOMANY/ KAJARIA/ORIENT as approved by GE]

M&L for rendering 15mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Brick work with fly ash bricks (Modular size), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 except bricks complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 except stone complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25mm thick (size not less than 450mm x 600mm) with and including 20mm thick cement screed base in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

M&L for 20-25 mm thick cuddapah stone slab (single piece) as in cooking platforms and like; with & including 15mm thick screed bed in CM 1:4 and pointing in grey cement and making hole for LPG gas pipe complete all as specified and directed.

Welding in repairs exceeding 2.5 cm but not exceeding 5 cm in length, thickness of metal to be welded not exceeding 6mm complete all as specified and directed.

Running welding in repairs, thickness of metal to be welded not exceeding 6mm complete all as specified and directed.

Running welding in repairs, thickness of metal to be welded exceeding 6mm but not exceeding 9mm complete all as specified and directed.

S&F in repairs stainless steel plate rack of minimum size 31”x36’x10” fixed with screws on wall complete all as specified and directed. [Make : PRAYAG (Model No P-348) or equivalent in NEELKAMALNIRALI as approved by GE]

S&F in repairs stainless steel plate rack of minimum size 24”x30’x10” fixed with screws on wall complete all as specified and directed. [Make : PRAYAG (Model No P-330) or equivalent in NEELKAMAL/NIRALI as approved by GE]

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads and S&F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads and S&F Sheet glass 4.0 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs 40 mm dia, cupboard knobs fixed with nut, screws and washers of mild steel, bright finished complete all as specified and directed.

Resecuring or easing & adjusting, without taking down, shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Resecuring or easing & adjusting, without taking down, shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S&F in repairs decorative mild steel chromium plated, 19mm dia, minimum thickness 1mm, curtain rod with side fixing brackets, rings & decorative knobs complete all as specified and directed.

S&F in repairs Aluminium anodised barrel tower bolts of extruded section, 100 mm long complete all as specified and directed.

S&F in repairs Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

S&F in repairs Aluminium handles, cast type anodised, 150 mm size complete all as specified and directed.

S&F in repairs 25 mm dia, cupboard knobs fixed with nut, screws and washers of mild steel, bright finished complete all as specified and directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 150mm complete all as specified and directed.

S&F in repairs Door closer hydraulically regulated, cast iron body, designation No.2, universal type, suitable for door shutters of weight between 36 to 60 kg complete all as specified and directed.

S&F in repairs 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. [MAKE:-RAJSHRI / SINTEX as approved by GE]

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. [MAKE:-RAJSHRI / SINTEX as approved by GE]

S&F factory made Flush shutters 40mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F in repairs Pre-laminated particle board 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work with & including fixing French polished 6mm thick teak wood lipping all round with nails complete all as specified and directed.

S&F in repairs Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 150 mm long complete all as specified and directed.

S&F in repairs Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 100 mm long complete all as specified and directed.

S&F in repairs Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs Aluminium alloy, anodised, sliding door bolt 200 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 100mm size complete all as specified and directed.

S&F Continuous (Piano) hinges, mild steel, bright finish or electro galvanized, 30 mm width of flaps (when open) complete all as specified and directed.

S&F in repairs 250 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate duly welded to steel frame complete all as specified and directed.

S&F in repairs Extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and directed.

S&F in repairs mild steel peg stay stove enameled black for steel window/ventilator complete all as specified and directed.

S&F in repairs MS powder coated peg sets of 3 Nos pegs, heavy quality complete all as specified and directed.

S&F in repairs MS powder coated peg sets of 6 Nos pegs, heavy quality complete all as specified and directed.

S&F in repairs Hasp and staple 150 mm size, mild steel, safety type, stove enamelled black, including bolt to hinge plate, fixed with screws complete all as specified and directed

S&F in repairs Hasp and staple 150 mm size, safety type, aluminium anodised including bolt to hinge plate, fixed with screws complete all as specified and directed.

M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

Supplying, fabricating & fixing powder coated aluminium sections of required size for doors, windows and ventilators, frames and shutters and partitions including aluminium hinges of required size jointing cleats, screws sash fasteners, plug for fixing with walls, columns, etc complete all as specified and directed. [MAKE: JINDAL/ AJIT INDIA/ HINDALCO as approved by GE]

S&F in repairs mirror reflecting Sheet glass 5.0 mm thick, ordinary quality and glazing to aluminium door, window & partition including pad/gasket, area exceeding 0.5 Sqm in each pane complete all as specified and directed.

Taking down aluminium door shutters of any description & area and refixing in the same/other opening after carrying out necessary repairs replacing rubber beading and jointing cleats (if required) and refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed. NOTE:- Aluminium styles/rails, if required to be replaced will be measured and paid separately.

Taking down aluminium window shutters of any description & area and refixing in the same/other opening after carrying out necessary repairs replacing rubber beading and jointing cleats (if required) and refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed. NOTE:- Aluminium styles/rails, if required to be replaced will be measured and paid separately.

S&F in repairs Sheet glass 4 mm thick, ordinary quality and glazing to aluminium door, window & partition including pad/gasket, area exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs 12mm thick toughen glass as in doors, partitions, stair case railings, or other similar works in approved shape & design with necessary steel fittings & fixtures including 300mm ong stainless steel handles fixed n both sides to door shutter, locks fixed with wall/ceiling/floors, floor springs, etc complete all as specified and directed..

S&F in repairs Floor door springs suitable for aluminium swing doors including necessary cutting in floors and making good to match with the existing surface complete all as specified and directed. [Make : Kelwyn/Amar or equivalent as approved by GE]

S&F in repairs mild steel, 6 lever, mortise lock, vertical type, size 75mm, SS finish complete all as specified and directed.

S&F in repairs cup board, 6 lever, mortise lock, size 100mm, SS finish complete all as specified and directed.

S&F in repairs 0.90mm thick decorative laminate, any type, fixed with approved adhesive as per manufacturers instructions complete all as specified and directed.

S&F in repairs 1.50mm thick decorative laminate, type-1, colour & patterns as approved, fixed with approved adhesive as per manufacturer’s instructions complete all as specified and directed.

S&F in repairs asbestos free calcium silicate board of size 600x600x6mm, fixed to steel frame work in ceiling with & including applying two coats of oil bound distemper complete all as specified & directed. NOTE:- Cost of making frame work for light fittings, etc is deemed to be included in the quoted unit rate

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed..

S&F in repairs Asbestos cement 6mm thick, corrugated or semi corrugated sheets in roofs, walls etc, fixed with L or J type or cranked hook bolts complete all as specified and directed.

S&F Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F Steel work in tubular/structural trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL as approved by GE]

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in ridges, etc, fixed with & including self tapping screws complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL as approved by GE]

M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means including filling depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats distemper oil emulsion, white or tinted complete all as specified and directed. NOTE:- 3mm thick wall care cement putty where ever required shall be measured & paid separately.

M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion, white or tinted complete all as specified and directed.

M&L for Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats of exterior acrylic emulsion weather coat paint, white or tinted complete all as specified and directed. [Make:- Ace Paint of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE] NOTE:- 3mm thick wall care cement putty where ever required shall be measured & paid separately.

M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of exterior acrylic emulsion weather coat paint, white or tinted complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats of interior plastic emulsion paint, white or tinted complete all as specified and directed. NOTE:- 3mm thick wall care cement putty where ever required shall be measured & paid separately.

M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of interior plastic emulsion paint, white or tinted complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of ceilings and applying one coat of interior plastic emulsion paint, white or tinted complete all as specified and directed.

M&L for applying 3mm thick wall care putty complete all as specified and directed. [Make: Birla/JK]

M&L for French polishing on surfaces of wood and wood based materials of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

M&L for 3 to 5mm thick heritage finish with granular finish (shape/size/colour of granules as approved by the user) complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying high Granular textured finish paint over and including one coat of primer as per manufactures instructions complete all specified and directed . NOTE:- (i) Texture finish shall be applied by texture roller to produce high profile texture finish. (ii) Make of Granular textured finish paint:- Asian Royal or equivalent in Dulux/Nerolac as approved by Engineer-in-charge. (iii) 3mm thick wall care cement putty where ever required shall be measured & paid separately.

M&L for Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F for Shalimar Tar Plastic (STP) TM waterproofing compound or equivalent approved make for certain degree of expansion, contraction and vibration around J hooks of Asbestos/GI sheets, caulking for roads and masonary walls, filling minor cracks and gaps complete all as specified and directed.

Attending day to day complaint of different type of plumbing nature such as cleaning and refixing of old GI/PVC pipe line, repair and fixing sanitary fittings such as Bib taps, Pillar taps, Flushing cistern, WCs and any other plumbing related works as assigned by the Engr-in-charge on all days excluding sundays and holidays by employing 01x Plumber (skilled) with proper dress and tools to entire satisfaction of Engr-in-charge complete all as specified and directed

Attending day to day different type of carpainter complaint such as refixing of doors and windows fixing of window glass panes any other joinery related works as assigned by the Engr-in-charge on all days excluding sundays and holidays by employing 01x Carpenter (skilled) with proper dress and tools to entire satisfaction of Engr-in-charge complete all as specified and directed

Demolition of reinforced cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Demolition to cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling posts or struts (Wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground (posts embedded in in concrete, brick work, masonry work, etc.) complete all as specified and directed.

Dismantling asbestos cement / galvalume (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface channels and drains complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in 25mm thick sub floors, leveling course, etc finished even & rough complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Add to or deduct from BOQ item No. 179.00 for each 25 mm girth or part thereof over or under 30 cm complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed. [MAKE: ACCOPROOF/WATER SEAL/MC BOUCHAMIE, MUMBAI/FOSROC/CICO/PIDILITE as approved by GE]

M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy/reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. [MAKE:- MEHTAB / NAVYA TILES / SAP PAVERS/ SAGAR TILES or any ISI marked as approved by GE]

M&L for Factory made, machine pressed, M-40 grade concrete interlocking paver blocks (glossy/reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 80 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. [MAKE:- MEHTAB / NAVYA TILES / SAP PAVERS/ SAGAR TILES or any ISI marked as approved by GE]

Taking down old paver blocks any shape/thickness from the surface and re-fixing at same place with and including required thickness of stone dust after leveling of ground with proper slope to make the surface even complete all as specified and directed.

M&L for Chequered paver tiles reflective/glossy type, any colour as decided by GE, size- 300mm x 300mm x 20 to 25mm thick, set, jointed and pointed in neat cement slurry in floors, etc with & including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Use & waste of Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for fair finished flat surfaces of concrete complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for RCC 1:2:4 Type B-1 as in slabs supported in walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F for Mild steel angle iron as in posts and struts including embeding in concrete , notching for wire , cutting tops to shape,drilling holes, bolting etc., conforming to Fe 290 Gde E-165, complete all as specified and directed.

Mild steel screw bolts ( machine made ) with hexagonal or square heads at one end and screwed the other ends with washers 12 mm dia and n exc 5 cm long, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed.

Supply only mild steel Galvanised wire Chain link fencing square mesh of size 50 x 50 mm made out of 4 mm dia wire, complete all as specified and directed.

S&F for galvanised 2 strand steel barbed wire 2.24mmn dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, icl securing or typing at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out in hard / dense soil, complete all as specified and directed.

S&F Mild steel conforming to Fe-290 Gde E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of walls and applying two coats of cement based paint, complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over & including a coat of cement wash complete all as specified and directed.

M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Fibre glass reinforced translucent corrugated sheeting, 1.5 mm thick, with two corrugations sid lap fixed with L type or J type or cranked hook / bolts complete all as specified and directed.

M&L for Cutting holes in brick walls built in cement or cement lime mortar for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3; cutting exceeding half brick but not exceeding one brick complete all as specified and directed.

S&F Mild steel plain black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets, fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required complete all as specified and directed.

S&F reinforced concrete pipes, class NP2, 300mm bore, laid and jointed with collars complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC) of any diameter, set in cement mortar including fittings complete all as specified and directed.

M & L 50 mm thick Sand stone slabs in foothpath, sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in louvers and jallies 35mm thick (measured solid) of approved design/style including all mouldings and set in cement mortar 1:4 complete all as specified and directed.

M&L for Providing Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in precast fencing posts, struts, etc, average sectional area exceeding 100 Sqcm and not exceeding 250 Sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed..

M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in kerbs stone for side of path, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Painting lines, dashes, arrows, letters, etc on roads, pavements and the like exceeding 10cm wide with road marking paint, white or golden yellow complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Deduct schedule of credit (calculation will be done off line) Rs. 56140.00

Neelam Traders

Samaksh Enterprises

H S ENTERPRISES

SATHI ENTERPRISES