864/WS-46/2021-22

Amount

Complete removal of existing treatment including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots from old plastered or un plastered surfaces of walls and preparation of wall surfaces to receive next treatment complete all as specified and directed (Buildings upto and including 3 Storeys).

M&L for applying 3 mm white wall care putty in two layer to obtain smooth/even finish using sand paper complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coat of distemper oil emulsion complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. (Buildings upto and including 3 Storeys).

M&L for preparation of old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. (Buildings upto and including 3 Storeys).

M&L for preparation of old painted steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. (Buildings upto and including 3 Storeys).

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on new/old surfaces with two or more coats, complete all as specified and directed.

M&L for preparation of old plastered or un-plastered surface of walls and applying one coats of plastic emulsion paint complete all as specified and directed.

M&L for preparation of plastered or un-plastered surface old decorative and washing down, brooming down or steel wire brushing, etc and applying one coats of cement base paint on walls, complete all as specified and directed. (Buildings upto and including 3 Storeys).

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old prepared surfaces complete all as specified and directed. (Buildings upto and including 3 Storeys).

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite to laid over including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Providing edge moulding to 18-20mm thick granite/marble stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

S&F in repairs 20 mm dia decorative powder coated drapery curtain rods with bright finish, including decorative side domes, brackets and a minimum of 8 Nos curtain rings in per RM of length complete all as directed.

S&F in repair Vitreous chine wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, complete all as specified and as directed.

S&F in repair Vitreous china, white, wash hand basin, flat back size 550x400mm with Pedestal including MS brackets including cutting for and pinning including 32mm dia PTMT waste coupling in full threaded (minimum weight 45gms), but excluding waste pipe, waste fittings etc complete all as per specified and directed.

S&F fixed in repair Centre hole mixer cock for wash hand basin, for mixing hot or cold water, brass, CP, fancy type, with capstan head handles, screwed down high pressure, screwed for iron pipe or for brass ferrule of 15mm dia complete all as specified and directed.

S&F in repairs Bib taps cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repair Angle valve 15mm dia cast copper alloy fancy type chromium plated screwed down, high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs Towel rail 60 cm long CP complete all as specified and as directed

S&F in repair Corner Glass shelf 300 x 300 mm (Large), 225 x 225 mm (medium) & 150 x 150 mm (small) three set complete all as specified and directed.

S&F in repairs Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long complete all as specified and directed.

S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x3330mm x160mm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and paving's n exc 15 cm thickness (below or above ground level) as in plinth protection /path/hard standing /floor etc complete and removal of debris out side MD land complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) 25 mm thick as in floors complete all as specified and directed.

M&L for Vitrified Ceramic tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:4), complete all as specified and directed.

Ditto all as per ser item No. 30 described here-in-before but in skirting over 10 mm thick CM in 1:3 as in backing coat.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:4), complete all as specified and directed.

M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:4), complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x250x7mm / 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surface in CM (1:4) rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick plaster in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new plastered or un plastered surfaces of wall and applying two coat of distemper oil emulsion complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Buildings upto and including 3 Storeys).

M&L for preparation of plastered or un-plastered surface old decorative and washing down, brooming down or steel wire brushing, and removing all grass, vegetation or shrubs from wall and roof etc and applying two coats of cement base paint on walls complete all as specified and directed. (Buildings upto and including 3 Storeys).

M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in sunken portion complete all as specified directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified directed.

M&L for 15mm thick rendering to sides and bottom of sunken slab in CM 1:3 with water proofing compound, finishing the surfaces even and smooth without using extra cement complete all as specified directed. (WPC shall be measured and paid separately.

Supply only liquid water proofing Compound complete, all as specified and as directed.

S&F GI spouts 32 mm dia projecting out side 40 cm clear from of the face of wall complete all as specified directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc with grade of zinc coating 275 complete all as specified and as directed.

S&F 0.63 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work for cupboard, shelf etc complete all as specified and directed.

M&L for Decorative moulding /beading of fancy type over item No. 50 described here-in-before complete all as specified and directed.

S&F Continuous (Piano) hinges, mild steel, bright finish or electrogalanised, width of flap 30mm when open, complete all as specified and directed.

S&F Brass knobs of suitable size for cupboard and as approved by GE, complete all as specified and as directed.

S&F 100 mm Brass handles, cast type, polished bright complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes including fittings, jointed in cement mortar and taking out of trenches, if required in any description and dia complete all as specified and directed.

S&F 100 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110 mm bore VC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick ordinary quality glass sheet glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified and directed.

M/S PARVEZ AHMAD LONE

M/S REDLY ENGINEERS

M/S SHAH CONSTRUCTION COMPANY