CONSTRUCTION OF BUILDING,

Amount

EARTHWORK IN EXCAVATION Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling ,(return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed specified. (A) Up to depth of 2.00m below the existing ground (b) in hard/ dense soil

Stone masonry work in retaining wall, wing wall, abutment, foundations, steps, plinth etc in cement mortar in prop1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage. (b) Coarse Rubble Masonry

Providing and laying plain/ reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixture Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level. N) Without using admixture, plasticiser a) M15 grade concrete for prop 1:2:4

Supplying, fitting and fixing in position reinforcement bars confirming to relevant I.S. code for RCC work / RB walling including strengthening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (up to first floor level) (a) From primary producer: Tata/SAIL / Essar steel / Jindal steel / Shyam Steel / RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below Supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete work etc. (b) using 25mm thick plan

Earth / sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading, and unloading and carriage to the site of work

Construction of Granular sub-base by proving well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with total Rotabator at OMC, and compacting with three wheel 80-100 KN static roller capacity to achieve the desired density, complete as per Technical Specification cluse-402.

Providing polished tiles of approved quality, size, shape of specified thickness on pavers over a base of 100mm compacted sand gravel including cutting where necessary finished with flush pointing with Fix-A-Tile ( choksey / sika / pedelite/ rouf)/white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (A) Sun Rock High CTS Tiles (Pavers) (a) Silicon (Pavers) 60 mm thick

Plain cement concrete works with coarse aggregate of size 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately.) (a) in prop 1cement: 3 sand: 6 coars aggregate by volume

Earthwork in excavation for foundation trenches of Walls, retaining walls, footings of columns, steps, septic tank etc including refilling (returns filling) the quantity as necessary after completion of work breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified (A) up to a depth of 2.00m below the existing ground level (a) in ordinary soil

Providing soiling in foundation and under floor with stone/ best quality picked jhama brick sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete. (a) Brick on flat soiling.

Steel work riveted and/ or bolted / riveted in built up sections, frame work including cutting and hoisting, fixing in position and applying a priming coat of red lead paint up to 4.6m height about plinth including drilling holes supplying fitting and fixing with bolts and nuts or welding if necessary as directed. a) In beams and Joist with connecting plates / angle cleats.

Providing pre painted Glavalume sheet Roofing (PPGL) at all levels including fitting and fixing self drilling self tapping screws complete (Roof trusses, purlins etc to be measured and paid separately.) Tata blue scope / Dyna roof/durakolor/ Wonder roof or equivalent direct by the Department. (i) 0 .55 mm thick

Providing pre painted galvanized iron sheet (PPGI) accessories (ridges/valley/gutter/ flashing) at all levels including fitting and fixing self drilling, self tapping screws complete Dyna roof/wonder roof / JSW steel / spectrum or equivalent as directed by the department. (iv) 0.50 mm thick

providing in laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately) (I) Using Mixture Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level N) Without using admixture, plasticiser a) M15 grade concrete for prop 1:2:4

(B) In super structure from plinth level up to 1st floor level. I) walls (thickness not less than 100 mm) including attached plasticiser buttresses, plinth and string course etc. N) Without using admixture, plasticiser a) M15 grade concrete for prop 1:2:4

a)From primary producer Tata / SAIL/ Esser steel Jindal steel / Shyam steel /RINL (I) TMT Corrosion resistant steel (CRS) reinforcement bar

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S Rod/ Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) in cement mortar in proportion 1:4 (1 cement:4sand)

15mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm grith and finished even the smooth including curing complete as directed A) on rough side b) in cement mortar 1:4

Sides of tie Beams, Grade, Beams etc. at or below ground level (b) Using 25mm Thick Plank

Flat surfaces such as soffits of suspended floor, roofs, landings cantelever slabs, chajjas, balconies and the like. (a) floors etc. upto 200 mm in thickness. (ii) using 25mm thick plank

Cement concrete works in topping 1:1:2 (1cement:1sand:2 grade aggregates on RCC floor tread and rise of steps finished with a floating coat of neat cement using cement slurry for bonds @ 2.75 kg of cement per sq. m of floor to be laid in panel including curing complete as directed (a) 15mm thick

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18 mm on floor skirting, rises and treads of steps over 15mm thick base of cement mortar in prop 1:3 (1 cement:3coarse sand) including cutting where necessary finished with flush pointing with a Fix -A-TILE (Choksey/sika/pedelite/Rouf) white cement slurry mixed with approved pigment 2 maths set of tiles mixed with approved pigment to match the shade of the tiles complete at all levels is specified and directed (coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department. b)Executive range Somany/ Orient /nitco / vormora/Vita/ Marbito/Make I)Of size 800 mm x 800 mm and above

Providing fitting, fixing M.S grill of required pattern for windows/ clerestory Windows/opening with MS flats at required spacing in frame all round square or round MS bars with round headed bolts and nuts or screws I. Plain Grill (C) Fixed to Brickwork / P.C.C/ R.C.C

Supplying fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F suspended ceiling which includes GI perimeter channel of size 0.55 mm thick (having one flange of 20mm and another flange of 30 mm and a web of 27mm) along with perimeter of ceiling screws fix to brick wall / partition with the help of nylon sleeves and screws at 610 mm c/c. Then suspending GI intermediate channels of size 45mm ( 0.9 mm thick with two equal flange of 15mm each) from the soffit at 1220 mm c/c with ceiling angle of width 25 mm x10 mm x0.5 mm thick fixed to soffit with GI cleat and expansion fasteners. Ceiling station of 0.55 mm thickness having knurled web of 51.5 mm and two equal flange of 26mm is which lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c 9.5 mm/ 12.5 mm tepered edge Gypboard (conforming to IS 2095-1982) is then screw fixed to ceiling section with 25 mm long drywall screws at 230 mm c/c . Screw fixing is done mechanically either with screw driver for drilling machine with suitable attachment. Finally boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed (for light) fittings, providing opening for doors, window ventilators etc cut out made with frame of perimeter channel supported suitably to be measured in paid separately where necessary). 9.5 mm thick

Providing polished ceramic wall tiles of approved quality, size shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement:3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite/ Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). c) Delux range Somany/ Orient/Nitco/Varmora Make ii) Of size 250mmx500mm and above

Providing Ceramic Tiles of Approved Quality,Size,shape and thickness not less Then 8 mm on Floors, skirtings risers of steps over cement mortar bed 15 mm thick in prog. 13 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Delux range Somany/ Orient/ Nitco/ Asian/ Make Of Size 300mm x 300mm and aove

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core. (ii) 35 mm thick.

Providing fitting and fixing door made out of 25mm thick antitermite water proof board with both side 4mm veneer ply- finished by laminated polist with brass handle, godrej lock with all fitting and accessories size (2.00 x 0.75) meter.

Providing wood work in frame (chowkaths) of doors, window clerestory windows and other similar works wrought, frame and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embedded in cement Concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)

Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars. joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device locking arrangements, screws etc as required complete as required complete as and directed for all levels (a) 2 Trick Sliding window (iv) 5mm Clear Glass

Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in- charge. (For payment, only weight of Stainless Steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered.

Tata make circular Hollow Section-CHS of Grade YST-310 Conforming to I.S Specification : 1161-1998

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) Dyna roof / Wonder Roof/ JSW Steel /Spectrum or equivalent as directed by the Department (ii) 0.50 mm thick

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter/Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete Dyna roof / Wonder Roof JSW Steel/Spectrum or equivalent as directed by the Department (iv) 0.55 mm thick

Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed.

Providing surface preparation for walls, ceiling etc. using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed:

Finishing old/ new wall with water proofing weather that smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/Nerolac ) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i)Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICl paint/J & N paint/ Nerolac)

Providing pre painted Glavalume sheet Roofing (PPGL) at all levels including fitting and fixing self drilling self tapping screws complete (Roof trusses, purlins etc to be measured and paid separately.) Tata blue scope / Dyna roof/durakolor/ Wonder roof or equivalent direct by the Department. (i) 0 .55 mm thick

Providing pre painted galvanized iron sheet (PPGI) accessories (ridges/valley/gutter/ flashing) at all levels including fitting and fixing self drilling, self tapping screws complete Dyna roof/wonder roof / JSW steel / spectrum or equivalent as directed by the department. (iv) 0.50 mm thick

PADMAVATI CONSTRUCTION