CA NO GE 861 EWS 61 2023 24

Amount

Demolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors & paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

Demolition and breaking up drain pipes, 200 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and directed.

Demolition and breaking up drain pipes, 150 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) complete all as specified and directed.

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shaft wells, cesspits manholes pier holes etc n. exc 10 sqm on plan and n. exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in (soil) including spreading, levelling , watering and well ramming in layers n exc 25cm thick, complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point, complete all as specified and directed.

Walling of random rubble masonry with best quality stone, uncoursed, well bonded, bedded and solidly hearted and built in CM 1:6, complete all as specified and directed.

All as per the description of item No 12 here-in- before but except stones, complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed.

All as per the description of item No 14 here-in- before but except bricks, complete all as specified and directed.

PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channel and drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified and directed.

Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping including necessary formwork, complete all as specified and directed.

15mm thick rendering on stone masonry surfaces or other than fair faces of brick work in CM 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed.

15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

75mm thick PCC 1:3:6 type C-2 (40 mm graded crushed stone aggregate) as in sub-floor, sub-base, floor and pavings, etc, complete all as specified and directed.

25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in floors to recieve floor finishes, complete all as specified.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed.

S&F Glazed ceramic tiles (coloured tiles) in vertical surfaces 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work complete all as specified and directed.

Precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate for cover slab for Man holes / Septic tank set in CM 1:4, complete all as specified and directed.

S&F MS TMT Bars of 6 mm dia to 8mm dia cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and beniding with and including MS wire (annealed) not less than 0.9 mm dia or securining with clips complete all as specified and directed.

Cutting into existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming beching as required for 150 mm dia of pipe, complete all as specified and directed.

200mm bore reinforced concrete pipes, class NP-2, laid and jointed complete with collars, complete all as specified and directed. NOTE: Laying of sewage line in running sewage water & temporary diversion/plugging of existing sewage line & bailing out of sewage water is the responsibility of contractor and the rate for the same is deemed to be included in the quoted rates.

150mm bore reinforced concrete pipes, class NP-2, laid and jointed complete with collars, complete all as specified and directed. NOTE: Laying of sewage line in running sewage water & temporary diversion/plugging of existing sewage line & bailing out of sewage water is the responsibility of contractor and the rate for the same is deemed to be included in the quoted rates.

Plain cement concrete bed 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore pipe, complete all as specified and directed.

Plain cement concrete bed 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore pipe, complete all as specified and directed.

Steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures in short lengths, fixed to wall and ceiling or laid in floors, complete all as specified and directed.

Steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures in short lengths, fixed to wall and ceiling or laid in floors, complete all as specified and directed.

S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes 16mm SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or laid in floors etc.complete all as specified and directed.

S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes 20mm SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or laid in floors etc.complete all as specified and directed.

S&F in repairs wash hand basin vitreous China flat back 550x400mm size white including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, pair of brackets of mild steel 35 x 35 x 6mm size including one CP pillar tap cast copper alloy 15mm bore,one brass stop valve 15mm bore and one PVC connection15mm size with PTMT nuts of length 450mm long complete all as specified and directed.

S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed.complete all as specified and directed.

S&F in repairs 15mm bore fancy type CP Bib taps cast copper alloy with capstan head screw down for iron pipe or for brass furrel complete all as specified and directed.

S&F in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm?125gms).complete all as specified and directed.

S&F in repairs 15mm bore Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms) complete all as specified and directed

S&F in repairs 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and directed

S&F in repairs 15mm bore angle stop valve PTMT any colour high pressure screwed for iron pipe and fixed,(minimum weight 15mm-90 gms) complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.

S & F in repairs Vitreous chaina wash down water closet pan ( Pedestal pattern), white, including fixing bolts plastic seat cover of same make (but flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern and flushing pipe, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465mm x 355mm x 265mm (minimum), white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) flat back or corner wall type ,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repairs 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed on walls etc, complete all as specified and directed.

S&F in repairs 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed on walls etc, complete all as specified and directed.

110mm bore dia PVC (SWR) bends, complete all as specified and directed.

75mm bore dia PVC (SWR) bends, complete all as specified and directed.

110mm bore dia PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

110mm bore dia PVC (SWR) reducers, complete all as specified and directed.

75mm PVC (SWR) vent cowl complete all as specified and directed.

Dismantling of Concrete, brick work masonry Posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M&L PCC 1:3:6, type C2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete in post holes complete all as specified and directed.

S&F MS bolts n exc 12 mm dia purpose made with hexagonal or square head one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexogonal or square nut, exc 30 cm long complete all as specified and directed.

S&F MS Section (Swan angle shape) flat, Angle, round for hand rails Tie bars post and struts in fencing including cutting tops to shape as directed, drilled holes, notching for wire, etc flat iron fillets (for securing wire mesh) conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

S&F in repairs galvanized 2 strand steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type or standard rails straining bolts, including securing or tying at crossings with provision of Galvanised mild steel wire staple pins etc as directed (each line of wire to be measured) complete all as specified and directed.

S&F in repairs three layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position 1000 ltrs all as specified in SSR Part- I complete all as specified and directed.

Cleaning of septic tank of any capacity & any size and depth including inlet and outlet chamber i.e taking out sludge/mud/debris and any other organic materials after plugging the incoming sewage line, loading to the cart/lorry & depositing not less than 100 metre away from site, cleaning and covering the deposited sludge with minimum 25cm thick layer of earth, complete all as specified and directed. (All work to be carried out under foul condition). NOTE:- Contractor to take all necessary precationary measures to safe gaurd the loabours agaist any cauality while cleaning of septic tanks as there may be poisonous gases in the septic tanks / soakage wells etc. The covers of septic tank shall be left open for sufficient period so that such gases are blown out before entering of any person in the septic tanks. The rate for taking necessary precautions is deemed to be included in the quoted rate.

Cleaning of 150mm bore sewage lines/drain pipes including manholes laid to any slope or gradient, any depth with manual or mechanical method, removing and depositing the sludge not less than 100 metre away from the site of clearing and covering the sludge with layer of 25cm thick layer of earth and testing the sewage line for smooth flow by pouring water from manhole to manhole complete all as specified and directed. (All work to be carried out under foul condition.)

Cleaning of 100mm bore sewage lines/drain pipes including manholes laid to any slope or gradient, any depth with manual or mechanical method, removing and depositing the sludge not less than 100 metre away from the site of clearing and covering the sludge with layer of 25cm thick layer of earth and testing the sewage line for smooth flow by pouring water from manhole to manhole, complete all as specified and directed. (All work to be carried out under foul condition.)

Cleaning of blocked WC including and upto first manhole with manual labour and well flushing with clean water and the seat functional including depositing the sludge not less than 100m away in pit including digging of pit and covering the pit with earth layer not less than 25cm thick complete all as specified and directed.

Cleaning of blocked nahani/floor gully trap upto first manhole with manual labour and well flushing with clean water including depositing the sludge not less than 100m away in pit including digging of pit and covering the pit with earth layer not less than 25cm thick complete all as specified and directed.

Cleaning of manhole of any capacity & any size and depth including inlet and outlet chamber i.e taking out sludge/mud/debris and any other organic materials after plugging the incoming sewage line, loading the sludge etc. in the cart/lorry & deposting not less than 100 metre away from site and covering the deposited sludge with minimum 25cm thick layer of earth complete all as specified and directed. (All work to be carried out under foul condition.)

FIRDOUS AHMAD BABA

M/S SHEIKH FEROOZ AHMAD

Javeed And Co