SPECIAL REPAIR TO BLDG NO P-26 AND P-27 (COOK HOUSE AND DINING HALL) OF BASE HOSPITAL UNDER GE GUWAHATI

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.

Demoliation of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as directed.

S&F Prepainted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

All as per item No. 4 here-in-before but expect sheet. (Reusable sheet obtained from item No 2 here-in-before)

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L 25mm thick Cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in sub base of flooring for laying floor finishes complete all as specified and as directed.

M&L for 18-20 mm thick machine cut Kota stone slab as in flooring over and including 20 mm thick screed bed in cement mortar (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 18-20 mm thick machine cut Kota stone slab as in as in risers, skirting, dado etc including moulding/ rounding tthe edges of the slab, over and including 15mm thick backing layer in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as directed.

M&L for light shade vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set and jointed :in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer 1:6 complete all as specified and as directed.

M&L Coloured glazed ceramic tiles 7-8mm thick, area of each tiles exc.0.11 sqm but not exc 0.18 sqm,as in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed.

M&L Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick backing layer in cement mortar 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.

S&F Gl frame work for seamless ceiling, Size of grid 605 x 605mm, comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, including 4mm thk Pre Painted Non asbestos fibre cement building boards fixed or laid/ inserted to GI framework with screws complete all as specifiedcomplete as required as per manufacturer’s instructions and as directed .

M&L false ceiling with 10 mm thick 600mm x900mm plaster of Paris sheets fixed with machine screws on and including GI channel 18 gauge thick grid work, main joists placed at 750 mm centre to centre , cross joists placed at 450mm centre to centre, hanging with 6mm dia GI wire suspenders from roof, ‘J’ hooks bolts and nuts etc and treating the POP sheets with thin layer of POP with Gypsum anhydrous binder and prepare the surface till smooth surface is achieved; and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of ceiling sheets all complete as required as per manufacturer’s instructions and as directed .

Taking down chowkats or frame n exc 1.5 sqm each including shutter ( without taking off shutters from the frames) complete all as directed.

Taking down chowkats or frame exc 1.5 sqm but n exc 4 sqm each including shutter ( without taking off shutters from the frames) complete all as directed.

S&F 2nd class hard wood plain solid, straight chowkats and frames , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F factory made 35 mm thick , 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a), complete all as specified and as directed.

S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S&F 200 mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified.

S&F 300mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed.

S&F 150mm Extruded aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F Colour coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Colour coated (minimum thickness of powder coating 50 micron) anodised aluminium windows/ ventilators any type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply only 5.5mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum window/ventilator shutters complete all as specified and as directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed baluster; walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 2000 ltrs capacity complete all as specified in SSR Part I, including writing date of cleaning on tank using stencil in white syntheic paint height not exc 30cm ("DATE OF INSTALLATION: DATE") and necessary dismantling old unserviceable tank complete all as specified and as directed

S&F in repairs 15mm bore stop valves fancy type cast copper alloy, chromium plated, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed.

S&F in repairs 15mm bore Bib taps chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs,15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

Taking down 15mm bore steel tubing and connections, including cleaning the reuseable pipe for refixing or removal complete all as specified and directed

S&F 15mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing old serviceable steel tubing in new or old position (wall, ceiling & floor) of 15mm bore with necessary GI (medium grade) fittings complete all as specified and as directed.

Taking down 20mm bore steel tubing and connections, including cleaning the reuseable pipe for refixing or removal complete all as specified and directed

S&F 20mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing old serviceable steel tubing in new or old position (wall, ceiling & floor) of 20mm bore with necessary GI (medium grade) fittings complete all as specified and as directed.

S&F in repair, Table top wash hand basin with fixing accessories,size :425x345x175mm including waste coupling complete all as specified and as directed.

S&F in repairs 15mm bore, pillar cock with 200mm extension body, chromimum plated complete all as specified and as directed. complete all as specified .

:S&F in repair, Bottle trap (with internal partition) 32mm size with 250mm & 190mm low wall connection pipes & wall flange all as specified and as directed.

S&F in repair, 15mm angular stop cock with wall flange all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed

Demoliation Cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debries/rubbish from the site complete all as specified and directed.

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 5mm) mixed with liquid water proofing compound in top layer as per manufacturer's instructions, finishing the surface fair and even without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid seperately under appropiate item.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L Rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished surface even and fair without using extra cement complete all as specified and as directed.

M&L prepration of old surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L preparing new surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L preparing new surfaces and applying Two or more coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, over a coat of 1mm thickness plaster of paris putty over plastered surface to prepare the surface even and smooth and a coat of priming coat complete all as specified and directed.

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling timber scantlings 40sq. cm and over in section, in any position,unframed work complete all as directed.

Dismantling one way Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including necessary preperation of surfaces and applying one shop coat of zink chromate primer paint complete all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F Hard drawn steel wire fabric cut to lengths, bent to shape required (weight not less than 4Kg/Sqm) and tying with and including mild steel wire (annealed) not less than 0.9mm in dia complete all as specified and as directed.

S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410 Gde-E-250, Quality A, including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L preparing new Steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L preparing old Steel surfaces of any description, not otherwise describe over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L preparing new Steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L 75mm thick cement concrete (1:2:4) type B-2( using 40mm graded crushed stone aggregate) as path/pavings and finished even and fair without using extra cement complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as directed.

S&F second class hardwood 20mm thick Boarding, fixed with nails in any situation (except flooring and skirting, planned both sides complete as specified and as directed.

M&L 25mm thick Cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in flooring finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as directed.

M&L for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. Note : (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scafolding upto 10m hight of building is included in this item. (c.) The contractor shall submit letter of any manufacturer of paint (as specified in tender) and their authorized applicator by whom the tenderer propose to excecute in the subject work before commencement of work Authorized applicator shall have authorization letter from the manufacturer (Minimum regional HQ) and authorization letter needs to be valid for the complete period of execution of the painting work (d) Masking of window/doors during spray painting using polythine film will be included. (e) Cleaning and clearing site of paint, mats etc. included.

M&L for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Note (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scafolding upto 10m height of building is included in this item. (c.) The contractor shall submit letter of any manufacturers of paint (as specified in tender) and their authorized applicator by whom the tenderer propose to excecute in the subject work before commencement of work Authorized applicator shall have authorization letter from the manufacturer (Minimum regional HQ) and authorization letter needs to be valid for the complete period of execution of the painting work.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint with using auto roller for making the surface uniform complete all as directed. Note :- (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scafolding upto 10m height of building is included in this item. (c.) The contractor shall submit letter of any manufacturers of paint (as specified in tender) and their authorized applicator by whom the tenderer propose to excecute in the subject work before commencement of work Authorized applicator shall have authorization letter from the manufacturer (Minimum regional HQ) and authorization letter needs to be valid for the complete period of execution of the painting work.

M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface with using auto roller for making the surface uniform complete all as specified and directed. Note : - (a) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper mashking to be carried out before primer and paint application). (b.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (c.) The contractor shall submit letter of any manufacturers of paint (as specified in tender) and their authorized applicator by whom the tenderer proposed to excecuted in the subject work before commencement of work Authorized applicator shall have authorization letter from the manufacturer (Minimum regional HQ) and authorization letter needs to be valid for the complete period of execution og the painting work. NOTES APPLICABLE FOR Srl Item no. 77 to 80 (i) After preperation of surfaces, Engg-In-Charge shall approve the same before applying primer and finishing coats. (ii) Building wise Stage Passing Register shall be maintained and shall be signed by Engg-In-Charge and contractor. (iii) The equipments to be used in the work shall be certified by the manufacturers with whom work proposed to be executed (iii) The contractor shall submit Guarantee Certificate for period of 5 Years from certified date of completion and manufacturer warranty for 05 Years

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down carefully unserviceable main switch and DB's including MCB's of any description and capacity complete all as specified and as directed.

M&L for concealed point wiring with two single core 1.5 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, fan regulators, etc. confirming to IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for MS Sunken boxes & making good to walls, floors etc. complete all as specified & as directed for the following :- Item continued as 84 to 87

One light point/Ceiling fan/Exhaut fan controlled by one way switch 5/6 amps.

One socket out let 5/6 amps point on the same board controlled by one way switch 5/6 amps.

One socket out let 5/6 amps point on the independent board controlled by one way switch 5/6 amps.

M&L for concealed point wiring for one socket out let 15/16 amps point on the independent board with two single core 4 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 4 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, etc. confirming to IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for MS Sunken boxes & making good to walls, floors etc.complete all as specified & as directed

M&L concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including 20mm(minimim) medium grade rigid PVC CONDUIT (ISI marked) of suitable size with all fittings and accessories ISI marked including cutting chases for conduits & and making good to walls, floors etc as per existing specifications.complete all as specified & as directed NOTE : (i)Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length. (ii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED.

S&F LED lights fitting 1x 20Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.complete all as specified and as directed.

S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S&F bracket suitable for fixing of security light fitting made out from 32 mm bore GI pipe, medium grade 1.5 metre in length, made to shape as required, fixed to pole with MS flat iron clamp of size 25x4mm duly welded, bent to shape and making holes etc complete including necessary nuts, bolts & washer etc as required and as specified and directed.

S&F Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, complete all as specified and directed.

S&F Modular shuttered Socket outlet 3/5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and directed.

S&F Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and directed.

S&F Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and directed.

S&F ceiling rose, PVC/Polycarbonate, isolated body, three terminals, complete all as specified and directed.

S&F stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans complete all as specified and directed.

S&F, Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Ttiple pole & neutral with 200 amps rated bus bar, including blanking plates as required and fixed to wall surfaces complete all as specified and as directed. .

S&F, Sheet metal enclosure for 8 way Distribution Boards (DB’s), IP-43 double door, Single pole & neutral with 200 amps rated bus bar, including blanking plates as required and fixed to wall surfaces complete all as specified and as directed.

S&F MCB, Four Pole, C Series 240/415 Volts, 100 Amps, 50 HZ, 10KA complete all as specified and as directed.

S&F MCB, SPN, C Series 240 Volts, 32 Amps 50 HZ, 10KA complete all as specified and as directed.

S&F MCB, SPN, C Series 240 Volts, 63 Amps 50 HZ, 10KA complete all as specified and as directed.

S&F MCB, SP, C Series 240 Volts, 6-32 Amps 50 HZ, 10KA complete all as specified and as directed.

M&L earthing with GI earth plate electrode 600x600x6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron wire 4mm dia earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth wire protected by and including PCC (1:2:4) type B1 precast RCC cover slab (1:2:4) reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth wire GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed.

Goswami Traders

D.B ENTERPRISE

M/S SEWAK SINGH