Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.3 LAccepted-AOC 24 SHANTI BHAWAN DHARI ROAD BELTARI PITHORAGARH UTTARAKHAND 262520 | PITHORAGARH | UTTARAKHAND | 262520 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹13.2 L+₹1.3 L (11.3%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹16.7 L+₹4.8 L (40.6%)Rejected-AOC PANTHAL KATRA REASI J K 182320 | REASI | JAMMU AND KASHMIR | 182320 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹14.8 L+₹2.9 L (24.7%)Rejected-AOC | L4 | Rejected-AOC Rejected |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
2 Sept 2020, 6:00 pmClosed
SHUBHAM PRAKASH
GE (NORTH) UDHAMPUR
GE/U(N)-43/2020-2021 REPAIR/REPLACEMENT OF ALUMINIUM WIRING INCLUDING INTERNAL FITTING AND FIXTURE AND OTHER CONNECTED WORKS OF 222 ASC SUPPLY 200/212 FPD 57 WEU HQ DDGSI AND 71 SUB AREA UNDER GE (NORTH) UDHAMPUR
2020_MES_367481_1
GE/U(N)-43/2020-21
Open Tender
Civil Works
Item Rate
180 days
UDHAMPUR
CLASS E
8 documents required · 8 mandatory
₹500
GE (NORTH) UDHAMPUR
₹40,000
Yes
23 Sept 2020
7 Aug 2020
4 Sept 2020
7 Aug 2020
2 Sept 2020
20 Aug 2020
Amount
Taking down carefully the existing Copper/Aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturb surface of walls, floors etc., complete all as specified and directed by Engr -in- charge. Note : (i) Old dismanteled wiring and accessories (other than reuse) will be contractors property and credit will be charged against schedule of credit.
Taking down carefully by unscrewing from boards / outlet boxes fittings and fixture such as, LED bulk head fitting, LED tube light fitting etc. for re use at site or carrying to the store (serviceable fitting shall be reuse) all as specified and as directed by engineer in charge.
Taking down Old Serviceable/unserviceable MCB DB any type/size etc after disconnecting (serviceable DBs /MCBs shall be reuse), complete all as specified and directed by engineer in charge.
Point wiring with 1.5sqmm PVC insulated unsheathed FRLS cable with multistaranded copper conductor anodised sunken boxs in and incl nonmetallic rigid PVC grade ISI marked conceled conduit wiring with vailedC/ML No with all accessories for one light/fan/bell point controlled by one switch with thickness not less than 1.25mm MS terminal boxes concealed on wall with and including 3mm thick laminated backlite sheet including 1.5sqmm PVC insulated unsheathed FRLS cable with multistranded copper conductor continuous earth wire connected to common earth dolly complete all as directed by Engineer-in-charge..
Point wiring with 1.5 Sq. mm PVC Insulated unsheathed FRLS multistranded copper conductor, medium grade ISI meraked drwan into and including PVC concealed conduit with all accessories from terminal box to junction of ceiling and wall and rest of circuit conductor wire drwan in to and including suraface PVC rigid non metalic conduit for one ceiling fan point controlled by one switch with and also including 1.5 sqmm continious earth wire connected to common earth dolly complete all as specified and directed by engineer incharge.
All as per item No. 04 above but for bell / buzzer on independent board controlled by one push button bell switch.
All as per item No. 04 above but for one 5 Amps socket outlet on independent board.
All as per item No. 04 bove but wire size 2x2.5 Sqmm to controlled the 3 pin 5 / 15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLS 1100 volts grade un sheathed single core stranded copper conductor cable of size 2.5 Sqmm.
All as per item No. 04 above but controle by 2 Nos.of two way switch.
All as per item Srl No. 04 herein before but for 3 pin socket outlet 5 Amp on same board, complete all as specified and directed by Engr -in-charge.
M&L Point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqmm drawn in and incl PVC casing and caping with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan/controlled by one switch with thickness not less than 1.25mm annealed steel boxes concealed on wall with and including 3mm thick laminated backlite sheet complete all as directed by Engineer-in-charge.
All as per item No 11 above but for two way point wiring
All as per item No 11 above but for one 3/5 pin socket 5 Amp on same board.with cable1.5 sqmm size.
All as per item No 11 above but for one 3/5 pin socket 5 Amp on independent board.with cable1.5 sqmm size.
All as per item No 11 above but for 3/5 pins socket outlet 15 Amps independent with 2.5 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 2.5 Sqmm complete all as specified and directed.
All as per item No. 11 above but for bell / buzzer on independent board controlled by one push button bell switch.
S&F Switch Piano flush type single pole 5 Amps One way, all as specified and directed by Engineer- in - Charge.
Fixing only serviceable Switch Piano, flush type, One way, single pole, 5 Amps, obtained from item no 02 as above complete all as directed by Engineer- in - Charge.
S&F Switch Piano flush type single pole two way 5 Amps, all as specified and directed by Engineer- in - Charge
Fixing only serviceable Switch Piano, flush type, two way, single pole, 5 Amps, obtained from item No-02 as above complete all as directed by Engineer- in - Charge.
S&F Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type complete all as specified and directed by Engineer- in - Charge.
Fixing only serviceable Two in one, 3 Pin, 5 Amp flush type socket outlet obtained from item No-02 as above complete all as directed by Engineer- in - Charge.
S&F Switch Piano type single pole 15/16 Amps One way, complete all as specified and directed by Engineer- in - Charge.
Fixing only serviceable Switch Piano, flush type, One way, single pole, 15 Amps, obtained from Item No -02 as above complete all as directed by Engineer- in - Charge.
S&F Socket outlet Two in one, 3/5 Pin piano type 15/16 Amp flush type complete all as specified and directed by Engineer- in - Charge.
Fixing only serviceable Two in one, 3 Pin, 5 and 15 Amps, flush type socket outlet obtained from item No-02 as above complete all as directed by Engineer- in - Charge.
S&F Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as specified and directed by Engineer - in - Charge.
Fixing only serviceable Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body obtained from item No-02 as above complete all as directed by Engineer - in - Charge.
S&F Electric bell (Ding dong) AC 230/250 volts grade single pole ISI marked, complete all as specified and as directed by engineer in charge
Fixing only serviceable Calling bell, obtained from item No-02 as above complete all as directed by Engineer- in - Charge.
S&F switch piano flush type for bell Push 5 Amps, complete all as specified and directed by Engineer- in - Charge.
Fixing ony serviceable bell push switch piano, flush type, white colour, obtained from Item No-02 as above complete all as directed by Engineer- in - Charge.
S&F Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked complete all as specified and directed by Engineer- in - Charge.
Fixing only serviceable Stepped type, electronic fan regulator, flush type on the existing phenolic laminated sheet etc. as obtained from Item No-02 as above complete all as directed by Engineer- in - Charge.
Fixing only serviceable light fittings any type as obtained against item No 2 all as specified and directed by engineer incharge
Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location all as specified and directed by engineer in charge.
Hanging /fixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from item no 36 all as specified and directed by engineer in charge.
M&L Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-5 of MES Part-1 fixed in replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of Earthing. Note : (a) On testing after completion of earthing, if the desired earth resistnace is not obtained, the earthing will be done by the contractor at his own risk and cost to the entire satisfaction ot the engineer incharge. (b) The contractor shall quote his rate considering taking down cost of existing unserviceable earthing.
Sub main wiring with two run single core 6 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia PVC concealed conduit medium grade ISI marked with all accessories such as Tees, elbows, junctgion boxes etc, as required fixed on wall alongwith one run of 6 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by engineer-in-charge. Note : Two run of 6 sqmm and one run 4 sqmm cable and one run of PVC conduit shall be measured as one RM
S&F Switch Piano flush type single pole two way 5 Amps fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Switch Piano flush type single pole 5 Amps one way fixed in replacement, complete all as specified and directed by Engineer- in - Charge
S&F switch piano flush type for bell Push 5 Amps fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Socket outlet Two in one, 3/5 Pin piano type 5 Amp and 15 Amp flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Switch Piano type single pole 16/20 Amps One way, fixed in replacement, complete all as specified and directed by Engineer- in - Charge
S&F Switch socket combination piano type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Switch socket combination piano type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body fixed in replacement, complete all as specified and directed by Engineer - in - Charge.
S&F Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Electric bell(Ding dong) AC 230/250 volts grade single pole ISI marked fixed in replacement, complete all as specified and as directed by engineer in charge.
Fixing only serviceable MCB DB of any type and capacity obtained from Item No 03 complete all as specified and directed by engineer incharge.
S & F in replacement single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 8 ways.Make:- Legrand Ekinoxe/ schneider(Acti-9)/ Siemens(Betagard-8GB 32).
S & F in replacement single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways.Make:- Legrand Ekinoxe/ schneider(Acti-9)/ Siemens(Betagard-8GB 32).
S&F in replacement Distribution board 4 way TP&N Double Door IP43-IK09 with metal door are fitted with Bus Bars, Neutral Links suitable for 415V, 50Hz, Blanking Plates, Suitable for TP/FP MCB. Make:-Legrand cat pt no-507670/ Legrand Ekinoxe/ schneider(Acti-9)/ Siemens(Betagard-8GB 32).
S&F MCB TPN 63 Amps four pole 415V incl all termnials, fitting etc. Make: Legrand (DX-3) cat no- 408702/ schneider(Acti-9)/ Siemens(Betagard- 5SL4).
S&F in replacement 'C' series SPN MCB 40 to 63Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc. Make: Legrand (DX-3) cat no- 408637, 408639/ schneider(Acti-9)/ Siemens(Betagard- 5SL4).
S&F in replacement 'C' series SP MCB 06 to 32 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all termnials, fitting etc. Make: Legrand (DX-3) cat no- 408587,90,92,93,94,95/ schneider(Acti-9)/ Siemens(Betagard- 5SL4).
S&F in replacement 'C' series SP MCB 40 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all termnials, fitting etc. Make: Legrand (DX-3) cat no- 408596/ schneider(Acti-9)/ Siemens(Betagard- 5SL4).
fixing only serviceable MCB SPN/SP any capacity obtained from item no 03 as above all as specified and as directed by engineer in charge.
S&F Modular fan step regulator 120W 02 module including taking down unserviceble one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/Havells
S&F Modular switch 01 way 06A, 01 module including taking down unserviceble one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/Havells
S&F Modular switch 01 way 16A, 01 module including taking down unserviceble one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/Havells
S&F Modular bell push flush type 6A, 01 module including taking down unserviceble one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/Havells
S&F Modular socket, 6A-2/3 pin, 02 module including taking down unserviceble one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/Havells
S&F Modular socket, 6A/16A-2/3 pin, 02 module including taking down unserviceble one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/Havells
S&F PVC rectangular block for mounting switches, sockets, fan regulator etc. of size 200x150x50mm deep including making necessary cutting all as specified and as directed by engineer in charge, Make Anchor or equivllent to havells
S&F PVC rectangular block for mounting switches, sockets, fan regulator etc. of size 250x200x50mm deep including making necessary cutting all as specified and as directed by engineer in charge, Make Anchor or equivllent to havells
S&F 3 mm thick plastic laminated ebonite sheet cover of size 200x150mm including cutting /finishing or making hole for mounting of switches, sockets, regulators etc all as specified and as directed by engineer in charge.
S&F 3 mm thick plastic laminated ebonite sheet cover of size 250x200mm including cutting /finishing or making hole for mounting of switches, sockets, regulators etc all as specified and as directed by engineer in charge.
S&F Slim linear LED lighting fixture 4/5W watt LED batten, with full base of extruded poly carbonate isolated driver, complete making all connection from ceiling rose to fittings including testing complete all as per the direction of Engr-in-Charge. Make of LED -Syska Cat No:SSK-SQ0401/Wipro Cat No : D530565/C&S Cat No: LTTBIF5WLED/W/ Havells: Cat No: LHEXBXPNIN1W005
S&F Slim linear LED lighting fixture 20 Watt LED batten, P.F greater than 0.9, input voltage range from 90 Volts to 280Volts with full base of polycarbonate extruded section acting as a heat sink with closed back isolated driver complete making all connection using 1.5sqmm copper conductor multistranded PVC insulated 2 core flexible cable with from ceiling rose to fitting complete all as specified and as directed by engineer in charge.Make Make : Syska Cat No: SSK-SQ2001/Havells Cat No: LHEXBXPNIN1W020/ or equivallent to Wipro
Supply and fixing LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testing all as specified and directed by engineer in charge. Make Syska Cat No: SSK-BH-9W /Wipro Cat No : DA11265/Crompton :Cat No: LBHE-10-DL /Havells: Cat No: RUGBYNEONFT10WLED860SSYMTOPC
S&F decorative ultra slim linear polycarbonate Extruded LED lighting fixture 10/12 Watt LED of input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K more than 1080 lumens of IP 20 complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceilingrose to fitting complete all as per directed by Engr-in-charge. Make Syska Cat No: SSK-SQ1201 Wipro Cat No : D531065/Havells: Cat No: LUMILINEPLUSBS10WLED865SPCSS/ Philips Cat No : BN 021 LED10S- 6500 PSU GR S1
S&F security (Street) light fitting 25 watt with input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K more than 2200 lumens of IP 65 new generation energy saving & environmental friendly long life versatile pressure die cast aluminium with acrylic powder coated pressure die cast aluminium compact high power LED street light with heat resistant toughed glass, corrosion resistant, isolated driver including provision of GI tubing light grade bracket of suitable size and fixed on wall including clamps, nuts, bolts and washers for fixing of security/street light complete all as per specified and as directed by engineer in charge. Make: Syska Cat No: SSK-ST-25W-MG /Crompton :Cat No: LSTS-25-CDL/Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPC/Wipro Cat Part No: LR02-291-XXX-57-XX
M&L in replacement for submain wiring with 2X4QMM+1X4SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit complete including taking down userviceable submain wiring all as per site requirement and direction by EIC, all accessories complete all as specified and directed.
M&L in replacement for submain wiring with 2X1.5QMM+1X1.5SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit complete including taking down userviceable submain wiring all as per site requirement and direction by EIC, all accessories complete all as specified and directed.
M&L in replacement for submain wiring with 2X2.5QMM+1X2.5SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit complete including taking down userviceable submain wiring all as per site requirement and direction by EIC, all accessories complete all as specified and directed.
S&F LED light fittng LED PANEL 2x2 36 Watt LED environmental friendly, new genaration, aesthetically designed ultra modern recess mounting luminaire with high brightness light source, suitable for armstrong/Grid ceiling all as specified and as directed by Engineer in charge. Make : Havells Cat No : PLUTONEO2X2PLR34WLED857S , SYSKA -SSK-TVP-12030/ wipro cat No: 414065
S&F for Muziris Picture light flexible neck for adjusting beam bronze finish for superior feel long life life light source of 7W all as specified and as directed by engineer incharge. Make : Philips Cat No : 31402 or equivallent to SYSKA / WIPRO
S&F in repair rigid non- metalic PVC casing and caping of 25/12 mm inclusive of all elbow, tees, etc comlete all as directed by Engr- in- Charge.
S&F in repair LED PLL Lamps (Retro fit) 18 Watt all as specified and as directed by engineer in charge.Make Wipro Cat No: 1800-18W
S&F for Muziris wood pendant conical LED light bronze colour contemporary designs one head configuration for personalization ideal to support lighting effect lamp base E27 complete with necessary Hue WA lamp all as specified and directed by engineer incharge.
S&F in repair LED PLL Lamps (Retro fit) 08 Watt all as specified and as directed by engineer in charge.Make:SYSKA Cat No: SSK-PLL-08W-G
S&Fangle lamp holder ,pvc / polycarbonate type with back plate suitable for batten fittings all as specified and directed by Engr-in- charge.
M & L for replacement of sinlge pole and neutral enclosure with a two pin and earth and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as specified.
M/S Builders Indias
SWASTIK TRADERS
DEV RAJ MAGOTRA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .