Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹87,400
Closing Date
1 Sept 2026, 6:00 pm
GE (AF) Borjhar
Garrison Engineer (AF) Borjhar, Military Engineer Services, Guwahati Airport- PO, Borjhar Airport, Guwahati-15, Assam, Pin- 781015, Tele 0361 - 2840127
Addn Altn of Building No. T-23 and T-7 in 3 AFSR under GE (AF) Borjhar
2026_MES_764448_2
8566/BOR/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) Borjhar
MES Contractor enlisted as Class D category a(i) and having deposited Standing Security of Rs 1,00,000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
7 documents required · 7 mandatory
₹500
GE (AF) Borjhar
₹87,400
Yes
20 Aug 2026
20 Aug 2026
3 Sept 2026
20 Aug 2026
1 Sept 2026
27 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolition of brick work or stone / boulder masonary built in CM including all quoins, arches, pillars, etc but excluding ashlar, facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge | 6.3 | Cum | - | - |
| 2 | Demolition RCC of any description and any position not otherwise specifically provided included latent concrete. | 1.5 | Cum | - | - |
| 3 | Dismantling AC sheet (Corrugated, Semi corrugated etc) as in roofs etc complete all as specified | 787 | Sqm | - | - |
| 4 | Dismantling timber scantlings 40 Sqcm and over in section, in any position unframed work, door frame complete all as specified and directed . | 1.3 | Cum | - | - |
| 5 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, any description including cover fillets all as directed. | 450 | Sqm | - | - |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed. | 50 | Sqm | - | - |
| 7 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each, removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. | 34 | Each | - | - |
| 8 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 Square Metre and not exceeding 4 Square Metre each complete all as specified and directed. | 6 | Each | - | - |
| 9 | S&F for Galvalume zinc coated GI based corrugated sheet shall be 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon andfinished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers all as specified and directed. | 760 | Sqm | - | - |
| 10 | S&F for Galvalume zinc coated GI based plain sheet shall be 0.50mm thick (total coated thickness), 550 Mpa minimum, yieldstrength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers all as specified and directed. | 27 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.74 MB
BOQ_880198.xls
BOQ • 1.87 MB
Retender8566.pdf
Tender Documents • 1.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].