REPAIR MAINT OF BPI INSTALLATION AND COMPREHENSIVE MAINT OF DG SET OF PUMP HOUSE IN TECH AREA AND CONNECTED WORKS AT AFS CHAKERI KANPUR

Amount

M&L for cleaning of 100 Kilolitre capacity tank at ETS as per detail given below :- (a) Opening manhole cover of the tank complete with exhaust pipe, float assembly and air equalizing carefully, cleaning and re-fixing. (b) Taking out remaining ATF from tank manually and stored in barrels provided by the contractor. (c) Taking out sludge mud from the tank and throwing away upto 50 M distance from tank and filling clean water in tank for degassing injurious gases and taking out dirty water from the tank. (d) Scrapping internal surface of the tank with nylon brush and cleaning tank internally with detergent solution and taking out all dirty materials from tank and cleaning of tank with soft clean white cotton cloth and making the internal surface completely dry. (e) M&L for providing one coat of epoxy zinc rich primer ( MR 3:1) EPI coating on complete internal surface of the tank using epoxy thinner (MR 3:1) complete all as specified and as directed. (f) M&L for providing two coats of epoxy Epigard paint (white shade) on internal surface of the tank . (g) Re-filling of ATF stored in barrels before cleaning of tank. (h) Fixing Manhole cover assembly after putting with new neoprene gaskets, nuts, bolts etc complete all as specified and as directed.

M&L for cleaning of 50 Kilolitre capacity tank at VTB as per detail given below :- (a) Opening manhole cover of the tank complete with exhaust pipe, float assembly and air equalizing carefully, cleaning and re-fixing. (b) Taking out remaining ATF from tank manually and stored in barrels provided by the contractor. (c) Taking out sludge mud from the tank and throwing away upto 50 M distance from tank and filling clean water in tank for degassing injurious gases and taking out dirty water from the tank. (d) Scrapping internal surface of the tank with nylon brush and cleaning tank internally with detergent solution and taking out all dirty materials from tank and cleaning of tank with soft clean white cotton cloth and making the internal surface completely dry. (e) M&L for providing one coat of epoxy zinc rich primer ( MR 3:1) EPI coating on complete internal surface of the tank using epoxy thinner(MR 3:1) complete all as specified and as directed. (f) M&L for providing two coats of epoxy Epigard paint (white shade) on internal surface of the tank . (g) Re-filling of ATF stored in barrels before cleaning of tank. (h) Fixing Manhole cover assembly after putting with new neoprene gaskets, nuts, bolts etc complete all as specified and as directed.

M&L for cleaning of 5 Kilolitre capacity tank at ETS as per detail given below :- (a) Opening manhole cover of the tank complete with exhaust pipe, float assembly and air equalizing carefully, cleaning and re-fixing. (b) Taking out remaining ATF from tank manually and stored in barrels provided by the contractor. (c) Taking out sludge mud from the tank and throwing away upto 50 M distance from tank and filling clean water in tank for degassing injurious gases and taking out dirty water from the tank. (d) Scrapping internal surface of the tank with nylon brush and cleaning tank internally with detergent solution and taking out all dirty materials from tank and cleaning of tank with soft clean white cotton cloth and making the internal surface completely dry. (e) M&L for providing one coat of epoxy zinc rich primer ( MR 3:1) EPI coating on complete internal surface of the tank using epoxy thinner (MR 3:1) complete all as specified and as directed. (f) M&L for providing two coats of epoxy Epigard paint (white shade) on internal surface of the tank . (g) Re-filling of ATF stored in barrels before cleaning of tank. (h) Fixing Manhole cover assembly after putting with new neoprene gaskets, nuts, bolts etc complete all as specified and as directed. Note - for Sl No 1 to 3 (i) Work shall be carried out in restricted flame proof area and all safety precautions should be taken by the contractor while execution. (ii) All necessary safety arrangement T&P should be provided by the contractor to the workers during working at site.Date of cleaning and due date of cleaning shall be written with paint on existing notice board. (iii) Contractor shall allow sufficient time to dry up the new layer of treatment provided as instructed by Engineer-in-Charge. (iv) Make of Epoxy paint and Thinner:- ShalimarPaint/Berger Paint/Asian Paint as approved by GE.

S&F in replacement 12mm dia pressure release valve both ends screwed one end fitted to filter drum and other end fitted to12mm dia chromium plated copper pipe (heavy duty with one number brass adopter of suitable length) complete all as specified and as directed.

S&F in replacement aluminium alloy float valve of size 450mm dia complete all as specified and as directed.

M&L for greasing and servicing of 150 mm dia globe valve or plug valve to stop the leakage of ATF by providing gland packing, neoprene gasket of flange joint, tightening the joint complete all as specified and as directed.

M&L for greasing and servicing of 80 / 100 mm dia globe valve or plug valve to stop the leakage of ATF by providing gland packing, neoprene gasket of flange joint, tightening the joint complete all as specified and as directed.

M&L for cleanig and servicing of Strainer suitable for ATF complete all as specified and as directed.

M&L for applying one coats of 1st quality synthetic enamel paint on exposed surface of pipe lines,filter drum,ATF tank cover etc including preparation of existing surface by removing all dust,oil,rust etc including arrow marking and writing work etc complete all as specified and as directed.

S&F in replacement 150 mm dia cast steel globe valve with flanged ends and stainless steel spindle including rubber sheet gasket , mild steel nuts, bolts and washers complete all as specified and as directed. Make:- L&T/Audco /Kirloskar/Upadhyay

S&F in replacement 100 mm dia cast steel globe valve with flanged ends and stainless steel spindle including rubber sheet gasket , mild steel nuts, bolts and washers complete all as specified and as directed. Make:- L&T/Audco /Kirloskar/Upadhyay

S&F in replacement 80 mm dia cast steel plug/globe valve with flanged ends and stainless steel spindle including rubber sheet gasket ,mild steel nuts , bolts and washer complete all as specified and as directed.Make:- L&T/Audco /Kirloskar

S&F in replacement 65 mm dia cast steel plug/globe valve with flanged ends and stainless steel spindle including rubber sheet gasket ,mild steel nuts , bolts and washer complete all as specified and as directed.Make:- L&T/Audco /Kirloskar

M&L of heavy duty MS ERW pipe both end flanged welded as per site requirement (Max 3.00 RM in lenth) with suitable size nut,bolt & washer complete of size 65 mm size Make- Tata/Jindal or equivalent approved by GE.

All as per item no 14 but 80 mm size

All as per item no 14 but 100 mm size

All as per item no 14 but 150 mm size

Peiodical servicing of flame proof motor starter automatic / semi automatic having contactor of any size capacity and make including de-carbonizing the serviceable parts such as contactor, relays, timer etc and replacing existing copper conductor wiring cable of existing size and required length complete all as specified and as directed.

Disconnecting the electric connection from starter and motor including taking out of Flame proof pump set set with electric motor of capacity 7.5 HP from the existing position and strip opening, cutting the burnt out winding, cleaning the stator and re-winding the same with super enameled copper winding wire of same gauge using top class of insulating material and over hauling of pump including lath/ machine work for making housing of bearing , metaling ,welding, turning surfacing ,polishing of rotor shaft, and rethreading and replacement of , neck ring , bearing of required size (Make-NBC/SKF), bushes, rubber insertion sheet , nuts, bolts and washers including necessary other items for its smooth functioning and testing complete reassembling the same and re-fixing back in its original position complete all as specified and as directed

S&F in replacement contactor ML 2, three pole, 415 Volt complete all as specified and as directed. Make:- L&T/ Siemens/ABB

S&F in replacement contactor ML 1.5, three pole, 415 Volt complete all as specified and as directed. Make :-L&T/ Siemens/ABB

S&F in replacement electronic timer suitable for star delta starter complete all as specified and as directed. Make:- L&T/ Siemens/ABB

S&F in replacement of(Colaser) paper filters having filteration capacity 1 micron size (360mmx152mmx91mm) and shape as per existing/ Sample, by means of opening of chambers including reassembly of the same by replacing wornout gaskets, nuts, bolts, washers etc complete all as specified and as directed. Make:- Puromatic or any make approved by GE Note :- Sample of Filter is kept in Office

S&F in replacement of(Separator) SS filters having filteration capacity 1 micron size (360mmx152mmx91mm) and shape as per existing/ Sample, by means of opening of chambers including reassembly of the same by replacing wornout gaskets, nuts, bolts, washers etc complete all as specified and as directed. Make:- Puromatic or any make approved by GE Note :- Sample of Filter is kept in Office

S&F in replacement of SS filters having filteration capacity 1 micron size (460mmx112mmx41mm) and shape as per existing/ Sample, by means of opening of chambers including reassembly of the same by replacing wornout gaskets, nuts, bolts, washers etc complete all as specified and as directed. Make:- Puromatic or any make approved by GE Note :- Sample of Filter is kept in Office

Supply and fixing in replacement pressure gauge 100 mm dia 0- 10 Kg/sq cm complete all as specified and directed by Engr-in -charge.

Supply and fixing in replacement fully automatic star delta starter flame proof suitable for centrifugal / multiple scerw type pump set 15 KW ,three phase including MCB, Meters , and indicators including necessary other items to make serviceable all as specified and directed by Engr-in -charge. Make- SUDHIR /BCH/Bharat/R K Electrical or any make approved by GE

M & L for Repairing , servicing and maintenance of flame proof fuel pump ,three phase by means of carrying out proper inspection and replacement of defective parts which required at site including necessary oiling, greasing, filling of gland after complete all as specified and as directed.

Comprehensive and preventive maintenance of DG set any Make and 40 KVA to 110 KVA capacity which include tightening of nuts bolts, washers, greasing etc including checking of oil level ,coolant, battery terminal,filling of distilled water in battery ,cleaning of DG and DG set room for proper and smooth running complete all as specified and as directed.. Note (i) Spare parts shall be measured and paid for separately as considered under respective item. (ii) Labour cost of oiling, greasing, tightening of nuts, bolts and minor work are included in the unit rate quoted by the contractor. (iii) Contractor shall take all other preventive maintenance as per manufacture recommendation for smooth functioning.

Supply only rubber hose pipe complete set suitable for DG sets 40 to 110 KVA capacity complete all as specified and as directed.

Supply only V Belt/Grooved suitable for 40 to 110 KVA capacity DG sets complete all as specified and as directed.Make:- Dunlop/ MRF/ Fenner

Supply only oil pressure pipe of 40 to 110 KVA capacity of DG Sets complete all as specified and as directed. Make :-Griplex or equivalent

Supply only Diesel pipe flexible (rubber) for DG sets 40 to 110 KVA capacity complete all as specified and as directed.

Supply only coolant for radiator of any type suitable for DG set complete all as specified and as directed. Make :-Castorl/Servo /HP

Supply only Engine oil 20W 40 suitable for DG set complete all as specified and as directed. Make:- Castorl/Servo /HP.

Supply only oil pressure Gauge complete all as specified and as directed. Make:- Yankey /PricolVeethree.

Supply only temperature Gauge complete all as specified and as directed. Make- Yankey /PricolVeethree .

Supply only oil filter suitable for 40 KVA to 110 KVA DG set complete all as specified and as directed. Make:- Mico /Kirloskar/Fleet guard

Supply only Diesel filter(Primary and Secondary) suitable for 40 KVA to 110 KVA DG Set complete all as specified and as directed. Make:- Mico /Kirloskar/Fleet guard

Supply only Air filter element suitable for 40 KVA to 110 KVA DG Set complete all as specified and as directed.Make:-Mico /Kirloskar/Fleet guard

Supply only Ignition switch of 12/24 Volts complete all as specified and as directed.

Supply Only Water pump assembly suitable for 40 to 110 KVA DG Set complete all as specified and as directed. Make:- Kirloskar/Cumins./Ashok leyland

Supply only Battery terminal heavy duty suitable for battery 12 Volt 150 AH complete all as specified and as directed.

Supply only Battery leed of PVC insulated copper conductor 16 Sqmm single core fitted with lead terminal on DG side complete all as specified and as directed.

Dismantling of radiator from engine of any capacity , de-scaling and brazing as required for repair of water leakage etc and re-fixing the same after necessary repair work complete all as specified and as directed.

S&F in replacement of asbestos rope 12mm dia wrapped over the exhaust pipe complete all as specified and as directed.

Repair and overhauling of self starter 12 V or 24 V including rewinding of armature and replacement of clutch assembly, carbon bush etc complete all as specified and as directed.

Supply only AVR (Anti Voltage Regulator) for DG Set of capacity 40 to 110 KVA complete all as specified and as directed.Make:- Kirloskar /Cummins/Ashok Leyland

s & F in replacement of Automatic battery charger AC input 230 + 10% V output DC for 12/24 volt battery current 10-15 Amp complete all as specified and as directed. Make Elak Pvt limited model AC 04

S & F in replacement of battery 12 volts 150AH ,having minimum 36 Month warrentee as proved by manufecturer's by replacing complete negative & positive PVC separator, complete all as specified and as directed. Make :-Exide/Amron

Reconditioning of battery 12 volts 150AH , having minimum 36 Month warrentee as proved by manufecturer's , by replacing complete negative & positive PVC separator, electrolytes , parts & recharging including testing complete all as specified and as directed.

Supply, installation, testing and commissioning of Submersible pump set electric driven, ISI marked, , pump with bronze impellars, CI casing, with ss shaft, leaded bronze bearings, / bushes , complete all as per IS- 8034 with copper wound submersible motor suitable for 415 Volts , 3 phase, 50 Hz supply of suitable HP, stain less steel tubing as per IS-9283 of 2013 ( suitable for 200 mm dia borewell ) with Head 113-106 mtrs and discharge 50-70 M^3/Hr LPM, 4 stage complete Make- KSB or equivalent. Note : Old pump shall be deposited to MES store , shall be taken on charge on Ladger

S & F of Electric cable for submersible pump set, flat 16 Sqmm 3 core stranded copper conductor PVC sheathed cable all as specified and directed. Make- Finolex/ Polycab/Havells/ Plaza

Supply and fix in replacement FIP gear pump suitable for 40 KVA to 125 KVA

Supply and fixing in replacement phase sequencer cum pump protection system 415/440 volts, 50 Hz, internal working voltage 12/14 volt, suitable for 50 HP with MNX 100 comtactor capacity load for auto change of phase sequence if incommimg phase sequence changes, single phasing prevention system and adjustable low and high voltage protection system to protect the machinery, mounting on bracket made out 40x3 mm angle iron frame, all control wirings, cable connections as directed by Engr-in-Charge. Make : Indian Engineering Co/United Engineering

M&L for (in replacement) microprocessor digital type DG set controller of DG set capcity 40 KVA to 125 KVA ( Make of DG set- Greaves Cooton) including connect all control wiring & programming all the parameter related to DG set at site complete .

Reconditioning of battery 12 volts 180AH by replacing complete negative & positive PVC separator, electrolytes & recharging complete .

Supply only self starter 12 V complete suitable for diesel generating set including dismantling and removal of old self starter .Make:- Lucas.

S& F (in Replacemnt) Electronic microprocessor based digital & wire less type water level indicator with alarm at time of full level/Low level in over head tank of height upto 25 RM, including all eqpts accomodated in GI sheet box or completely enclosed complete including testing & Commissioning.. Make- Optic/ SAPCON/ Aquabrim

S & F in repair fully automatic star delta starter for submerssible pump set including connecting all incoming and outgoing copper wire as directed . Make- L&T cat part No-MU-G 50. or equivalent in Havells/ Kirloskar

S & F in replacement fully automatic star delta starter for submerssible pump set including connecting all incoming and outgoing copper wire all as directed . Make- L&T cat part No-MU-G 30. or equivalent in Havells/ Kirloskar

M&L for applyong one coats of synthetic enemel paint of approved shade after scraping of old paint, cleaning of all rusted portion of DG Set, panel and oil tank including writing SM No, Make, Capacity for 40 TO 110 KVA DG set etc complete all as specified and as directed.

M&L in replacement for MCCB 100 Amp , triple pole,25 KA adjustable complete all as specified and as directed.Make- Schinder/Legrand/Simense

M&L in replacement MCCB 160 Amp ,Fore Pole ,25 KA adjustable type complete all as specified and as directed. Make-schinder/Legrand/Simense

M & L for Repairing , servicing and maintenance of centrifugal / multiple scerw type pump set 15 KW ,three phase , Make - ROTO PUMPS by means of carrying out proper inspection by the company mechanic and replacement of defective parts which required at site including necessary oiling, greasing, filling of gland after complete all as specified and as directed. Note:- Spare parts required for repair shall be measured and paid seprately under respective item .

Supply only timing gear complete all as specified and as directed.

Supply only 'O' ring set complete all as specified and as directed.

Supply only set of gasket complete all as specified and as directed.

Supply only set of bearings complete all as specified and as directed.

Supply only mechanical seal complete set all as specified and as directed.

Supply and filling gear oil grade VG 320 complete all as specified and as directed. Make Castrol/Servo/HP

Supply only gland packing suitable for centrifugal / multiple scerw type pump set Make- ROTO PUMPS complete all as specified and as directed.

Supply and fixing fuel pressure gauge in fuel for centrifugal / multiple screw type pump set Make- ROTO PUMPS complete all as specified and as directed.

S&F in replacement Mechanical seal suitable for centrifugal pump of model no.RBP 100/65-91.5 complete all as specified and as directed. Make:- Roto.

Disconnecting the connection from prime mover including taking out of Armeture set of capacity 62.5 KVA from the existing position and strip opening, cutting the burnt out winding in feild coil, cleaning the stator and re-winding the same with super enameled copper winding wire of same gauge using top class of insulating material and over hauling of armeture including lath/ machine work for making housing of bearing , metaling ,welding, turning surfacing ,polishing of rotor shaft, and rethreading and replacement of, bearing of required size (Make-NBC/SKF), bushes, rubber insertion sheet , nuts, bolts and washers including necessary other items for its smooth functioning and testing complete reassembling the same and re-fixing back in its original position complete all as specified and as directed.

M&L for earthing complete with galvenised steel earth plate electrade 600 x 600 x6 mm thick buried directly in ground (earth pit not less than 2.5 m deep below GL) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 32x6 mm as earthing lead by means of boths, nuts check nuts and washers of GI all as shown in electrical plate No-3 of SSR Pt-I(2009) work includes for necessary excavation earth work PCC pit and RCC cover, funnel with salt ,charcoal dust, water pipe line 20 mm & protection pipe 40 mm, wire mesh complete all as specified and directed. Note: GI strip up to 7.5 mtr shall be deemed to be included in quoted unit rate.

Supply & fixing for GI strip 32x6mm on wall/batten or recessed or buried in ground all as directed by Engineer-in-Charge.

S&Fstructural steel work fabricated from structural , steel section including nuts,bolts,washers including cutting/ welding in any position, any shape and drilling hole for bolts in any size and shape as per site requirement or directed and including applying one coat of red oxide primer and two coat of synthetic enamel black paint complete all as specified and as directed.

M&L for framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of Ladder in Over Head Tank and similar work con-forming to Fe 290.Gde-E-165 all the articles shall be painted with two coat of food grain synthetic enamel paint over a coat of red oxide primer after preparation of steel surfaces complete all as specified and directed.

Preetpowercontrol

FATEHPUR CONSTRUCTION COMPANY