752778 ADDN ALTN CUM SPL REPAIRS TO OFFRS JCO OR MD ACCN AT CMM AND JCO OR MD ACCN AT MANDIR COLONY ANANT NAGER AND AMN SUB DEPOT LINE IN COD ESTATE JABALPUR UNDER GE WEST JABALPUR

Amount

SCHEDULE "A" :

Item No 01:- Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Item No 02 :- Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and directed.

Item No 03 :- Demolition of reinforcement cement concrete above ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed.

Item No 04 : Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete.

Item No 05 : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

Item No 06 : M&L for 10 mm thick Light shade vitrified ceramic tiles, double charged in floors, area of each tile exc 0.36 sqm but not exc 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Item No 07 : M&L for 10 mm thick Light shade vitrified ceramic tiles, double charged in riser of steps, skirting, dado and pillar area of each tile exc 0.36 sqm but not exc 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Item No 08 : - M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exc 0.36 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

Item No 09 : - M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exc 0.36 sqm in riser of steps, skirting, dado etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

Item No 10 : - M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm & not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

Item No. 11 BLANK

Item No 12 : M&L for 15 mm thick screed bed or bedding layer in CM 1:6 surface finished fair and even for laying floor finishes complete all as specified and directed.

Item No. 13 - M&L Machine cut Kota stone slab flooring 18-20mm thick as in riser, steps & skirting, over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab of the slab incl rubbing, polishing & rounding to edges/bull nosed incl 10mm thick plaster in CM 1:4.complete all as specified and directed.

Item No 14 : M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

Item No. 15:- M&L for glazed ceramic coloured tiles 350 x 250 x 7 to 8 mm / 450 x 350 x 7 to 8 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles complete all as specified and direct. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment (ii) Rendering shall be measured and paid separately under respective items.

Item No. 16 :- M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick or concrete surface of wall finished even and rough complete all as specified and directed.

Item No. 17 :- Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Item No. 18 :- M&L Brick work using modular bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Item No. 19 :- M&L for Brick work using modular bricks with sub class 'B' bricks straight or curved on plan built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

Item No 20:- M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete or sub base complete all as specified and directed.

Item No 21 :- M&L for 50 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finished even & smooth without using extra cement laid in bays with construction. 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand (all by weight) complete all as specified and directed.

Item No 22 :- M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Item No 23 : M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed.

Item No 24 :.Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Item No 25 : M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and finished even and smooth with out using extra cement complete all as specified and directed

Item No 26 : M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml /50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately.

Item No 27 : M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.

Item No 28 - Supply only liquid water proofing compound, ISI marked.

Item No 29 - Taking down chowkats or frames with shutters not exc 1.5 Sqm each (with out taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed.

Item No 30 :- Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed.

Item No 31 : Taking down shutter of any description n exc 1 sqm each and removing from site complete all as specified and directed.

Item No 32 : Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Item No 33 : M&L Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

Item No. 34 - S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Item No. 35 :- S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Item No. 36 :- S&F precoated steel window Rolled formed GI Section ECO 4000 (Openable double rebate window) Providing and fixing of single rebate openable/fixed windows made of galvanized steel as per IS 277 colour coated/ powder coated (base steel as per IS 513 of "D" quality, galvanized as per 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 48 x 50 mm, centre mullion section 48 x 50 mm, shutter section 47 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter with a 20 mm provision for guard bars/grills and the sections but to length mitre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. SS (stainless Steel) heavy duty pivot hinges per shutter and window fitted with 5mm thick plain float glass with EPDM (Ethyl Propylene Diamine monomer) gaskets including fixing frames in concrete/masonry wall by means of self expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge.

Item No. 37 :- S&F steel windows with side hung shutters incl box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed.

Item No. 38 :- S&F steel windows with side hung shutters factory made incl box type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed.

Item No. 39 :- S&F Steel windows or ventilators, fixed type with glazing bars complete all as specified and directed.

Item No. 40 :- S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

Item No.41 :- S&F pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock complete all as specified and directed.

Item No.42 :- S&F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock complete all as specified and directed.

Item No. 43 :- M&L for plain concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar worked including necessary form work as required complete all as specified and directed.

Item No. 44 :- S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Item No. 45 :- S & F PVC moulded door frame 95x45 mm incl all fittings complete all as specified and directed. Make Rajshree or equivalent

Item No. 46 :- S & F 35mm thick PVC door shutter complete all as specified and directed. Make Rajshree or equivalent

Item No. 47 : S & F Solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

Item No. 48 : S&F Factory made solid PVC Moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face,with particle board core supplying and fixing in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed.

Item No. 49 :- M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 for 100 mm long complete all as specified and directed.

Item No. 50 :- S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 all as specified and directed.

Item No. 51 :- S&F Butt hinges, medium weight, cold rolled mild steel 100 mm size complete all as specified and directed.

Item No. 52 :- S&F Butt hinges, medium weight, cold rolled mild steel 75 mm size complete all as specified and directed.

Item No. 53 :- S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt & 16mm dia complete all as specified and directed.

Item No. 54 :- S&F mild steel 150 mm long ordinary helical door spring incl roller and roller plate complete.

Item No. 55 :- S&F aluminium anodised, barrel tower bolts of extruded section 200 mm long, dia of bolt 12mm complete all as specified and directed.

Item No. 56 :- S&F aluminium anodised, barrel tower bolts of extruded section 150 mm long, dia of bolt 12mm complete all as specified and directed.

Item No. 57 :- S&F aluminium, anodised, barrel tower bolts of extruded section 100 mm long, dia of bolt 10mm complete all as specified and directed.

Item No. 58 :- S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size, rod dia 12mm complete all as specified and directed

Item No. 59 :- S&F extruded aluminium alloy handles fabricated type anodised of 100 mm size, rod dia 10mm complete all as specified and directed.

Item No. 60 :- S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed.

Item No. 61 :- S&F small fitings of 2nd class hard wood door, window stops and the like not exc 200 cucm each including MS butt hinges, medium weight, cold rolled 50mm long all as specified and directed.

Item No. 62 :- S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Item No. 63 :- S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/wooden beads complete all as specified.

Item No. 64 :- Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone,concrete or brick surrounds, glazed with putty of fixed with beads complete all as specified and directed.

Item No. 65 :- S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Item No. 66 :- S&F figured glass 3 mm thick, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed

Item No. 67 :- S&F 100 mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Item No. 68 :- S&F extruded brass handles, fabricated type, polished of 100 mm size complete all as specified and directed.

Item No. 69 :- S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and directed.

Item No. 70 :- S&F in repais corner Glass Shelves (code CAN-1173 of Jaquar make or equivalent make as approved by GE) complete all as specified and directed.

Item No. 71 :- S&F stainless steel Peg set of six powder coated as approved by GE.

Item No. 72 :- S&F C P glass corner shelf set of three single including Screws and CP bracket complete all as specified and directed.

Item No. 73 :- S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guards and railing 60cm long complete all as specified and directed.

Item No. 74 :- S&F MS Peg Set of six powder coated as approved by GE.

Item No. 75 :- S&F stainless steel fancy type drapery rods with two way wooden/brass brackets 20 -25 mm bore cut to length as reqd, approved by GE & directed by Engineers-in-Charge complete all as specified and directed.

Item No. 76 :- S&F Stainless steel finials of fancy type for curtain rod 20 mm dia as approved by GE.

Item No. 77 :- Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Pain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed..

Note :- Rate quoted by the contractor shall be inclusive of CPVC fittings with brass threading and CPVC normal fittings.

Item No. 78 :- Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Pain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed.

Note :- Rate quoted by the contractor shall be inclusive of CPVC fittings with brass threading and CPVC normal fittings.

Item No. 79 :- Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Item No. 80 :- Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

Item No. 81 :- S&F in repair chromium plated single lever wall mixer single lever withouy popup waste system with 450 mm long braided hoses complete.

Item No. 82 :- Supply & fixed in repair for central hole basin mixer (Continental code CON-167 KNB of Jaquar make or equivalent make & model as approved by GE) 15 mm bore fancy type complete all as specified and directed.

Item No. 83 :- S&F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower cimplete with 115mm long bend pipe, connecting legs and flange complete.

Item No. 84 :- S&F in repair chromium plated single lever wall mixer 3-in-1 with connector for hand shower arrangement with connecting legs, wall flanges and wall brackets for hand shower (code-CQT-23267 of Jaquar make or equivalent make as approved by GE) complete all as specified and as directed.

Item No. 85 :- S&F for sink mixer (Cat Part No ARI-39309 of Jaquar or Eqv) fixed, 15mm complete all as specified and directed.

Item No. 86 :- S&F in repairs Sink Mixer (code CQt-23309 Jaquar make or equivalent make as approved by GE) complete all as specified and as directed.

Item No. 87 :- S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete.

Item No. 88 :- S&F in repair vitreous china counter top WHB (Florentime code FLS-WHT-5601 of Jaquar make or equivalent make & model as approved by GE), size 565x415x190 mm including PVC waste pipe but excluding taps, etc complete all as specified and as directed.

Item No. 89 :- S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) including fixing bolts & excluding flushing cistern and flush pipe complete all as specified and as directed.

Item No. 90 :- S&F in repair white vitreous china wash down water closet one piece closet with integrated cistern, seat cover and twin flush fittings (Make: Prayag - SWIRL) including all fittings complete all as specified and as directed.

Item No. 91 to 99 BLANK

Item No. 100 :- S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x400 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor all as specified and as directed.

Item No. 101 :- S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and as directed.

Item No. 102 :- S&F in repair chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and as directed.

Item No. 103 :- S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

Item No. 104 :- S&F cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall compete all as specified and as directed.

Item No. 106 :- S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Item No. 107 :- S& F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and as directed.

Item No. 108 :- S&F in repair for Towel Rack 600mm long with lower hangers (Cat Part No AHS 1581 of Jaqur make or equivalent complete all as specified and directed.

Item No. 109 :- S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

Item No. 110 :- S&F in repair CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Item No. 111 :- S&F in repair stainless steel soap dish, of standard size and shape complete all as specified and directed.

Item No. 112 :- S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed.

Item No. 113 :- S&F in repair sink without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washes and waste pipe incl bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete.

Item No. 114 :- S&F in repair 0.63 mm thick kitchen plate rack made of astainless steel 600 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

Item No. 115 :- S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

Item No. 116 :- S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed

Item No. 117 :- S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC.

Item No. 118 :- S&F PVC (SWR) 'P' trap for 110 mm dia etc complete.

Item No. 119 :- S&F in repair chromium plated toilet paper holder with flap complete.

Item No. 120 :- M&L for RCC (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work incl form work complete all as specified and directed. Note - Reinforcement shall be measured and paid separately.

Item No. 121 :- M&L for 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including edge moulding & cutting hole for gas pipe and similar work and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Item No. 122 :- Mild Steel TMT bar 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Item No. 123 :- S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed.

Item No. 124 :- S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.

Item No. 125 :- S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 50 mm bore of pipe etc complete all as specified and directed.

Item No. 126 :- S&F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed.

Item No. 127 :- S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

Item No. 128 :- S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

Item No. 129 :- S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

Item No. 130 :- S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

Item No. 131 :- S&F in repair cockrage trap cum grating of size 100mm x 100mm make:- Prayag or equivalent complete all as specified and directed.

Item No. 132 :- S&F PVC (SWR) branch pieces, single (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door.

Item No. 133 :- S&F PVC (SWR) branch pieces, single (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm dia with access door.

Item No. 134 :- S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

Item No. 135 :- M&L PVC (SWR) Nahani/floor trap of diameter of outlet 75 mm, plain with grating with or without hole(as required) including jointing with solvent cement complete all as specified and directed

Item No. 136 :- Dismatling water tanks of capacity exc 250 and n exc 500 ltrs all as specified and directed.

Item No. 137 :- Dismatling water tanks of capacity exc 500 and n exc 1000 ltrs all as specified and directed.

Item No. 138 :- S & F rotational moulded polyethylene triple layer water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed.

Item No. 139 :- S & F rotational moulded polyethylene triple layer water storage tank (cylindrical vertical with closed top)1000 litre capacity hoisted and fixed in position complete all as specified and directed.

Item No. 140 :- S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

Item No. 141 :- S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both, screwed both ends for iron pipe complete.

Item No. 142 :- M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

Item No. 143 :- M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Item No. 144 :- Removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete all as specified and directed.

Item No. 145 :- M&L Preparing old wooden surfaces exceeding 10CM in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Item No. 146 :- M&L Preparing old steel surfaces exceeding 10CM in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Item No. 147 :- M&L for apply 1mm to 2mm thick wall care Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and rubbing with sand paper and making the surface even & smooth complete all as specified and directed.

Item No. 148 :- M&L for preparation of newly plastered surfaces of wall & concrete and applying 1mm to 2 mm thick wall care putty in two coats including preparation complete all as specified and directed.

Item No. 149 :- M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including rubbing the surface absolutely even and smooth complete all as specified and directed.

Item No. 150 :- M&L for apply 1mm to 2mm thick wall care Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and rubbing with sand paper and making the surface even & smooth complete all as specified and directed.

Item No. 151 :- M&L for preparation of newly plastered surfaces of ceiling and applying 1mm to 2 mm thick wall care putty in two coats including preparation complete all as specified and directed.

Item No. 152 :- M&L for applying two coats of oil bound distemper on ceiling over a coat of preimer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

Item No. 153 :- M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete.

Item No. 154 :- M&L for preparation of old plastered surfaces of ceilings and apply two coat of white wash complete all as specified and directed.

Item No. 155 :- M & L for two coats of cement based paint over a coat of primer on newly plastered surface of walls including preparation of surface complete all as specified and directed.

Item No. 156 :- M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed.

Item No. 157 :- Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified. (IWPC will be paid separately)

Item No. 158 :- S&F in repair 18/19 mm thick water proof block board of exterior grade Gde-I fixed with screws as kitchen, cup board box and shutters & shelves etc complete all as specified by Engr-in-Charge.

Item No. 159 :- S&F in repair 18 mm thick PVC sheet one side prelaminated of approved texture ("celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE) as in Kitchen cabinet. (withshelves and partitions) including necessary fitting & fixture as per manucture's instructions complete all as specified and directed..

Item No. 160 :- S&F of oil pull out (sleek make) of SS304 grade anticorrosive material.

Item No. 161 :- S&F plain basket (sleek make) of SS304 grade anticorrosive material.

Item No. 162 :- S&F Thali basket (sleek make) of SS304 grade anticorrosive material.

Item No. 163 :- S&F Cup & saucer (sleek make) of SS304 grade anticorrosive material.

Item No. 164 :- S&F of cutlary tray (sleek make) of SS304 grade anticorrosive material.

Item No. 165 :- S&F Binholder (sleek make) of SS304 grade anticorrosive material.

Item No. 166 :- S&F hitched channels Chanel and (exc 300mm n exc 500 mm) complete all as specified and directed.

Item No. 167 BLANK

Item No. 168 :- S&F Handles of senso (as per 3D designs) 150mm including all connection fitting complete all as specified and directed.

Item No. 169 :- S&F Europa cupboard locks as complete all as specified and directed.

Item No. 170 :- S&F in repair stainless steel hinges of 75mm for cupboards of senso (as per 3D designs) including all connection fitting as complete all as specified and directed and approved by GE.

Item No. 171 :- M&L for complete removal of existing water proofing treatment from top of roof and canopies / chajjas of building including removal of debris out side MD land all as directed.

Item No. 172 :- M&L water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete all as specified and directed.

(a) 10 mm thick rendering on roof surface/concrete surface in CM 1:4

(b) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg/Sqm

(c) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm incl cleaning surfaces.

(d) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less then 3kg/Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instructions.

(e) Applying two coats of bituminous aluminium paint on top of membrane @ 0.10 kg/sqm incl preparation complete.

Item No. 173 :- M&L Hydrulically pressed burnt clay tile plain of size 200x200x19/20 mm machine made laid over roof & including cement mortar screed 15mm thick in CM 1:4 mixed with water proofing compound and jointed & pointed in CM 1:3 mixed with 5% crude oil by weight of cement incl. dismantling of existing tiles as complete all as specified and directed.

Item No. 174 :- M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves,lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exceeding 10 cm girth in stone/brick walls complete all as specified and directed.

Item No. 175 :- Supply only Expanded metal in required size weight n. exc 4kg/Sqm complete all as specified and directed.

Item No. 176 :- M&L reflective rubber moulded chequered coloured cement concrete tiles 30cm x 30cm x 22 to 25 mm thick set, jointed and pointed in ceat cement slurry in floors with colour cement and pigments including 15mm thick screed bed in CM 1:6 for laying floor finish complete all as specified and directed.

Item No. 177 :- Excavation in trenches not exc 1.5m wide and not exc 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed

Item No. 178 :- Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed

Item No. 179 :- Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Item No. 180 :- Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.

Item No. 181 :- M&L for SGSW drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed as specified complete all as specified and directed.

Item No. 182 :- M&L for laying DWCP 150 mm dia pipes in trenches Class SN-8 conforming to IS 16098 (Part-2) in 6 mtr length with coupler complete all as specified and directed by Cngr-in-charge

Item No. 183 :- M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

Item No. 184 :- M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Item No. 185 :- M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

Item No. 186 :- M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed.

Item No. 187 :- Dismantling / taking down old existing unserviceable cement plaster, loose / unsound weaeken cement concrete of any description and in any position from existing external surfaces of RCC OHT/Sump/ Wall / Roof / beams / wall / roof / beams / columns /RCC, average depth 25 mm (at any staging) with power driven of pneumatic chisel and disposal of unservicable material debris and rubbish outside MD land at a place as specified by local bodies including cutting of all edges, making square shoulders of the cavities, roughening the smooth surfaces, scrapping out / removing corrosion all loose / scale / rust etc from the visible reinforcement by applying rust remover mascure RR of Themax Ltd or equivalent of chemco system/Webac chamicals and cleaning the steel reinforcement properly and then applying single component cementitious corrosion inhibiting primer for steel reinforcement mucis PROTEZIONE FERRO MONO of Thermax hermax Ltd or equivalent of Chemco system/Webac chemicals on visible reiforcement surfaces to form a continuous film not less than 1 mm thick all as specified and directed.

Note: (i) Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 mtr etc complete all as specified and directed by GE. (ii) Adoption of necessary safety arrangements like safety belts ropes, helmets netting etc which are required for safety of working at height exceeding 3 mtr shall be mandatary and deemed included in quoted rate.

Item No. 188 :- Providing and filling epoxy putty into RCC crack after opoening up RCC cracks in V-groove manner approximate 10mm wide & 10 mm deep using machanical cutter, properly cleaning the same to remove loose dust dirt etc and filling the same using Nitocote VF-three component solvent free, thixotropic, Eposy resin based putty having 100% solid contents mixed density of solvent free, thixotropic, Epoxy resin based putty having 100% solid contents mixed density of 1.6 g/cc, compressive strength - 50 N/mm2. life of 40 minutes at 27 degree C, Drying time 8 hrs, recoatable time 24 hrs, and finishing in line and level with existing concrete surface etc. complete as per in charge GE. Make:- Thermaz webac chemicals/ chemco system as approved by the GE.

Note: (i) Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 mtr etc complete all as specified and directed by GE. (ii) Adoption of necessary safety arrangements like safety belts ropes, helmets netting etc which are required for safety of working at height exceeding 3 mtr shall be mandatary and deemed included in quoted rate.

Item No. 189 :- M&L for providing rendering 20mm thick of cement mortar using BS 5F (Single component thicotropic fibre reinforced polymer modified repair mortar) of Thermax / webac chemicals / Chemco systems to achieve compressive strength of 15 N/mm2 in 1 Day, 25 N/mm2 in 3 Days, adhesion bond strength of >2N/mm2, furnished the surface even and smooth all as specified and directed. Note:-(i) Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding with steel props and working upto height 25 mtr etc complete all as specified and directed (ii) Adoption of necessary safety arrangements like safety belts ropes, helmets netting etc which are required for safety of worker working at height exceeding 3 mtr shall be mandatary and deemed to be inclusive in quoted rates.

Item No. 190 :- M&L for repair to cracks and damaged existing surfaces of RCC / Column / beam/ slab etc (Approx height upto 6 M from ground level) by structural strengthening using epoxy injection grouting with MAXGROUT E10 of Thermax Ltd or equivalent of Chemco system / Webac as approved by the GE complete all as specified and directed and as under:- (a) Fixing of GI nozzles in zig-zag fashion not more than 50cm c/c on RCC surfaces on all directions as required after drilling holes in concrete, fixing GI nozzles with fast setting mortar and covering with renderoc plug. The size of holes shall be 12mm dia and 75 mm in depth. (b) Epoxy injection grouting shall be carried out by using standard pressure grouting pump after mixing design and hardner to the extent till refuse to accept further grout complete. (c) Cutting and flushing of nozzles with surface after completing grouting and sealing the nozzles with cement mortar (1:1) and preparing the surface to match with the existing surfaces all as directed. Note: Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 25 mtr etc. complete all as per specified and directed by GE.

Item No. 191 :- S&F Mild steel frame work as in cooler stand, main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats or other connected plates of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.

Item No. 192 :- S&F stainless steel railing with ornamental on stairs, balcony and as per direction of Engineer - in - Charge

Item No. 193:- Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Item No. 194 :- Pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/cladding to wall, including ridge of same colour fixed with self tapping screws as specified.

Item No. 195 :- Pre-painted galvalume zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/cladding to wall, including ridge of same colour fixed with self tapping screws as specified.

Item No. 196 :- S&F rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters, fixed with angle cleat or other connecting plates of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed including dismantling of existing.

Item No. 197 :- S&F MS flat iron 40x6mm as in wind ties or similar work conforming to Fe-290 Gde E-165 including cutting, drilling, bolting or riveting etc complete all as specified and directed.

Item No. 198 :- S&F GI tubes medium grade with all fittings fixed to wall and ceiling or laid in floor, 40 mm bore of pipe complete all as specified and directed.

Item No. 199 :- M&L Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

INTERNAL ELECTRIFICATION

Item No. 200 :- Taking down copper / aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed.

Item No. 201 :- Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN / Main Switch including old unserviceable MCCBs /MCBs, Isolators, etc and making good to disturbed surface all as specified and directed.

Item No. 202 :- Taking down carefully copper/aluminium Sub main wiring of any size from surface /concealed /existing conduit of any height and removing materials at size and making good disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Item No. 203 :- Taking down carefully existing gysers of any capacity after disconnecting all necessary electric and water supply connections and deposit to MES store yard of AGE E/M West complete all as specified and directed.

Item No. 204 :- Taking down existing ceiling/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan and deposit to MES store yard of AGE E/M West complete all as specified and directed.

Item No. 205 :- Taking down existing single phase electric energy meter after disconnecting all necessary electrical connections deposit to MES store yard of AGE E/M West complete all as specified and directed.

Item No. 206 :- M&L for point wiring with multistranded copper conductor 1.5 Sq mm (nominal area), PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including PVC concealed conduit of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc with sunk in anodized pressed steel box 1.6mm thick for housing switch socket etc with white laminated 3mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 amps

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch outlet point controlled by one switch on independent board.

(f) One bell point controlled by one, bell push 5 Amps

Item No. 207 :- All as per item No 206 but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No. 208 :- M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm(nominal area), single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc with GI sunken boxes 1.2mm thick, 60mm deep for housing switch socket etc duly covered with modular white cover plate with inner frame suitable for modular switches including PVC insulated multi stranded copper conductor 1.5 Sq mm(nominal area) single core FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 amps

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch outlet point controlled by one switch on independent board.

(f) One bell point controlled by one, bell push 5 Amps

Item No. 209 :- All as per item No 208 but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No. 210 :- All as per item No 208 but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)

Item No. 211:- S&F switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed.

Item No. 212 :- S&F switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 213 :- S&F switch bell push piano type 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 214 :- S&F socket outlet 2 in 1, 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 215 :- S&F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fiffing complete all as specified.

Item No. 216 :- S&F stepped type electronic fan regulator flush Type complete all as specified and directed at site.

Item No. 217 :- S&F Modular switch Piano flush type, single pole, one way, 5/6 amp single module complete all as specified and directed at site.

Item No. 218:- S&F Modular switch Piano flush type, single pole, one way, 15/16 amp single module complete all as specified and directed at site.

Item No. 219 :- S&F Modular switch Piano flush type, single pole, two way, 5/6 amp single module complete all as specified and directed at site.

Item No. 220 :- S&F Modular socket outlet multipurpose having provision for 3 pin, 5/6 amp and 2 pin, 5/6 amp, 2 module piono flush type complete all as specified and directed at site.

Item No. 221 :- S&F Modular socket outlet multipurpose having provision for 3 pin, 15/16 amp and 3 pin, 5/6 amp, 2 module piono flush type complete all as specified and directed at site.

Item No. 222 :- S&F modular step type electronic fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed at site.

Item No. 223 :- S&F Bell Push modular 6 amps single module complete all as specified and directed.

Item No. 224 :- S&F lamp holder, PVC/ Polycarbonate type with back plate suitable for batten / slanting fittings complete all as specified and directed.

Item No. 225 :- S&F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ AC supply complete all as specified and directed.

Item No. 226 :- S&F Modular type TV socket out let complete all as specified and directed.

Item No. 227 :- M&L for Sub main wiring with approved colour as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as direced. (Note:- four runs of conductor cable, two runs of earth wire and one run of PVC conduit will be measured as one unit)

Item No. 228 :- M&L for Sub main wiring with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as direced. (Note:- Two runs of conductor cable, one run of earth wire and one run of PVC conduit will be measured as one unit)

Item No. 229 :- S&F Sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distruebed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 230 :- S&F Sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distruebed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 231 :- S&F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 232 :- S&F MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 233 :- S&F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 234:- S&F Metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and directed.

Item No. 235 :- S&F water heater storage type (Geyser) vertical/Horizental type as per site requirement with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star reted, ISI marked including 04 Nos of hold fechner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold complete all as specified and directed.

Item No. 236 :- S&F ceiling fan, 230 volts, 1200 mm sweep with main air delivery 210 CFM, service value of fan shall be greater than 6.1 as per BIS, with blades, down rod & other necessary accessories with brushless dirct current motor(BLDC) incl provn of flexible cable from ceiling rose to fan terminal complete all as specified and directed.

Item No. 237 :- Fixing only ceiling fan/exhaust fan (obtained from taking down) incl overhauling of fan, spray painting two coats with synthetic enamel paint & provn of 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal complete all as specified and directed.

Item No. 238 :- S&F Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL diect fir lamp, in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed.

Item No. 239 :- S&F Decorative wall mounted luminaire made our of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10 Watts complete all as specified and directed. Make:- Havells Cat Part No LHDLO6160099 or its equivalent in specified make.

Item No. 240 :- S&F LED 10 watts batten aluminium etruded with decorative end caps with warranty option of 5 years from date of installation complete all as specified and as directed. Make:- Bajaj Cat Part No BCLSB 10 NW or its equivalent in specified make.

Item No. 241 :- S & F Energy saving new generation 10 Watts LED bulk head fitting IP-65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 form ceiling rose to fitting complete all as specified and directed. Make:- Bajaj Cat Part No BIBWP 10W LED or its equivalent in specified make.

Item No. 242 :- S & F wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen etc with warranty option of 5 years from date of installation complete with all accessories internally pre-wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make:- Bajaj Cat Part No BCLAB 20 W WH LED P or its equivalent in specified make.

Item No. 243 :- S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements with warranty option of 5 years from date of installation/completion and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge. Make :- Bajaj Cat Part No ENXT P 24L WH CR PC SD or its equivalent in specified make.

Item No. 244 :- S & F for Energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 Cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable o size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick for fan base complete all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed included in quoted rate).

Item No. 245 :- S & F PVC non metallic rigid conduit 20mm dia ISI marked heavy duty white/ivory colour including all fittings such as bends, elbows etc for LAN, telephone and TV connections,cutting chases and making good the disturbed surface of wall to match with existing finish complete all as specified and as directed.

Item No. 246 :- Supply, installation, commissioning and testing indoor wall mounting LT Panel Board of minimum size 1.50 m (height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four nos Three phase KWH meter, one No. single phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB /MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 10 Sqmm copper wire and connections of all outgoing / incomming existing cable of any size and removing existing unsv one complete all as directed by Engineer-in-Charge. (For Officers Accn)

OUTGOING (a) MCB, Tripple pole & neutral, 40 amps, 415 volts, 'C' curve, 10 KA - 4 Nos (For each Accn) (b) MCB, single pole & neutral, 10 amps, 240 volts, 'C' curve, 10 KA - 01 No. (Stair case lighting) (c) Smart Single Phase Meter AC single phase two wire, tamper proof, static meter of class 1.0, 240Volts, 50 Hz of capacity 10 Amps-60 Amps conforming to IS-16444 and relevant IEC standards with in built 865-867 MHz radio frequency communication facility with self healing mesh netork with default and on demand display, billing data generation facility, antitemper features, microprocessor and LED/LCD based circuitry. Meter should support the follwing data: 30 min instantanous data for voltage, current, power factor, power cumulative energy and frequency, 30 load survey data forenergy, monthly billing survey for cumulative energy and max demand. Meter should have connnect/disconnect funtionality operable compactable system from prepaid billing software in future. The meter should support open communication protocol DLMS with the software. 01 No. (Make-L&T, Secure, Schneider) (d) Smart Three Phase Meter AC three phase four wire, tamper proof, static meter of class 1.0, 415Volts, 50 Hz of capacity 10 Amps-60 Amps conforming to IS-16444 and relevant IEC standards with in built 865-867 MHz radio frequency communication facility with self healing mesh netork with default and on demand display, billing data generation facility, antitemper features, microprocessor and LED/LCD based circuitry. Meter should support the follwing data: 30 min instantanous data for voltage, current, power factor, power cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for cumulative energy and max demand. Meter should have connnect/disconnect funtionality operable compactable system from prepaid billing software in future. The meter should support open communication protocol DLMS with the software. 04 Nos. (Make-L&T, Secure, Schneider)

Item No. 247 :- Supply, installation, commissioning and testing indoor wall mounting LT Panel Board of minimum size 1.20 m (height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of Seven nos single phase meter and MCB and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as directed by Engineer-in-Charge. (For JCO/ORs, Civilian Md Accn 06 Qtrs)

OUTGOING :- (a) MCB, Single pole & neutral, 40 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed -06 Nos (b) MCB, Single pole & neutral, 10 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 1 No.(stair case lighting) (c) Fixing only serviceable existing electric meter - 01 No. (d) Smart Single Phase Meter AC single phase two wire, tamper proof, static meter of class 1.0, 240Volts, 50 Hz of capacity 10 Amps-60 Amps conforming to IS-16444 and relevant IEC standards with in built 865-867 MHz radio frequency communication facility with self healing mesh netork with default and on demand display, billing data generation facility, antitemper features, microprocessor and LED/LCD based circuitry. Meter should support the follwing data: 30 min instantanous data for voltage, current, power factor, power cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for cumulative energy and max demand. Meter should have connnect/disconnect funtionality operable compactable system from prepaid billing software in future. The meter should support open communication protocol DLMS with the software. 06 Nos. (Make-L&T, Secure, Schneider)

Item No. 248 :- Supply, installation, commissioning and testing indoor wall mounting LT Panel Board of minimum size 1.20 m (height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of five Nos single phase meter and MCB and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as directed by Engineer-in-Charge. (For JCO/ORs, Civilian Md Accn 04 Qtrs)

OUTGOING :- (a) MCB, Single pole & neutral, 40 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 4 Nos (b) MCB, Single pole & neutral, 10 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 1 No.(stair case lighting) (c) Fixing only serviceable existing electric meter - 01 No. (d) Smart Single Phase Meter AC single phase two wire, tamper proof, static meter of class 1.0, 240Volts, 50 Hz of capacity 10 Amps-60 Amps conforming to IS-16444 and relevant IEC standards with in built 865-867 MHz radio frequency communication facility with self healing mesh netork with default and on demand display, billing data generation facility, antitemper features, microprocessor and LED/LCD based circuitry. Meter should support the follwing data: 30 min instantanous data for voltage, current, power factor, power cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for cumulative energy and max demand. Meter should have connnect/disconnect funtionality operable compactable system from prepaid billing software in future. The meter should support open communication protocol DLMS with the software. 04 Nos. (Make-L&T, Secure, Schneider)

External ELECTRICAL SUPPLY

Item No. 249 :- Supply & laying un-reinforced precast concrete cable cover, class LV type 1 ,flat, size 250 mm x 150 mm x 40mm sizes over the HT cable for protection of cable complete all as specified and directed.

Item No. 250 :- M & L Sand cushioning to under ground cable with screened river sand unwashed and gently punning to provide require cover complete all as specified and directed.(Punned thickness will be measured and paid)

Item No. 251 :- Boring holes horizontally under Road without damaging the surface of road (minimum 1.0 Mtr beow the road surface with the help of GI tubing of any dia not exceed 80mm bore for passing of UG cable all as specified as didrected (GI pipe laid shall be measured seperately).

Item No. 252 :- Supply & lay GI tubing light grade in protection of cable at road crossing / hard standing/pole protection fixed with clamps as per site requirement etc of following sizes complete all as specified and directed.

(a) 40 mm dia bore

(b) 25 mm dia bore

Item No. 253 :- M&L PCC 1:3:6 type C2 using 40 mm graded aggregate as in mass filling in road cutting including form work & finishing the surfaces even & fair complete all as specified and directed.

Item No. 254 :- Taking down existing old unserviceable LT UG / Service cable of any description and size complete all as specified and directed.

Item No. 255 :- Supply, laying and testing and commisioning LT underground cable 1100 Volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi standard aluminium conductor laid in pipes, trenches/ducts, on poles etc of following size complete all as specified and directed :-

(a) 4 core X 35 Sqmm

(b) 4 core X 25 Sqmm

(c) 4 core X 16 Sqmm

(d) 2 core X 10 Sqmm

Item No. 256 :- M & L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR Part-I including excavation and earthwork in any type of soil / strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Item No. 257 :- S&F switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed.

Item No. 258 :- S & F Socket outlet 2 in 1, 5pin, 5/15 amps, 230 Volts complete all as specified and directed.

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 1322686.35(Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)

Mahaveer Engineering Co.

Roshan Lal Talwar

KAKALI ENTERPRISE