Repair to security lights, panels, DG sets at AF Stn Bikaner under GE (AF) Nal

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5m depth, getting out the excavated earth, forming bottom surfaces to required gradient complete all as specified and directed.

Removal of excavated material / soils to a distance n exc 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling watering and well ramming in layers n exc 25 cm as in any type of soil complete all as specified and directed.

Taking out defective cable XLPE/PVC sheathed 1100 volt grade heavy duty armoured with aluminium conductor 2 core 10 sqmm from trenches shifting serviceable cable for relaying and depositing unserviceable cable in store yard of AGE (AF) Bikaner located at a distance of 1.5 KM (Approx) complete all as specified and directed. Note : Excavation and earth work shall be measured and paid for separately. However, cost of removal / taking out brick protection and GI pipe is included in the unit quoted rate of this item.

All as per Item No.4.00 here in before but size of cable 16 Sqmm 4 core

All as per Item No. 4.00 here in before but size of cable 50 Sqmm 3.5 core

All as per Item No. 4.00 here in before but size of cable 95 Sqmm 3.5 core

Supply, laying, jointing and testing of underground cable XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 10 sqmm laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed. Note : Excavation, earth work, sand cushioning and brick protection shall be measured and paid for separately

All as per Item No. 8.00 here in before but size of cable 16 Sqmm 4 core

All as per Item No. 8.00 here in before but size of cable 50 Sqmm 3.5 core

All as per Item No. 8.00 here in before but size of cable 95 Sqmm 3.5 core

Material and labour sand cushioning using dry and clean Tibba Sand for protection of underground cable, laid in two layers, first layer 80mm thick before laying of cable and second layer 150mm thick after laying cable, consolidated and compacted complete all as specified and as directed.

Supply & Laying in repairs well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and as directed.

Material and labour earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth GI strip of size 32x6mm by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and earth strip protected by galvanized iron pipe light grade 40mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 3 of SSR-2009 (Part-I).

Taking down /removing the unserviceable spares / parts required for the periodical service/ maintenance of 320 KVA DG Set 415 volts 3 phase 4 wire 50HZ, draining out the old engine oil, filling of new engine oil, top up coolant, cleaning and washing the oil sump with kerosene oil to make it free from dust and unwated particles, cleaning of radiator throuhly with soda ash powder greasing and lubricting all mobile parts, replacement of unserviceable spares / parts with new ones as directed and making it fully functional and testing on full load in the presence of Engineer-in- Charge. Notes : Spares parts, coolant, Engine oil required for replacement shall be measured and paid separately as 'Supply only' under relevent item of this schedule.

Supply only following spares / parts suitable for 320 KVA DG Set 415 volts 3 phase 4 wire 50HZ :-

Air filter (Make : Bosch/Fleetguard/Doossan)

Oil filter (Make : Bosch/Fleetguard/Doossan)

Fuel filter (Primary) (Make : Bosch/Fleetguard/Doossan)

Fuel filter (Secondary) (Make : Bosch/Fleetguard/Doossan)

Oil pressure pipe

Hose pipe (Water pump inlet)

Hose pipe (Water bodyoutlet)

Solenoid switch.

Automatic voltage regulator suitable for 320/400 KVA DG Set

Hose Pipe (Fuel / Radiator)

Battery Charger of 24V

Repair & maintenance to fuel injector pump of 320 / 400 KVA DG Set 415 volts 3 phase 4 wire 50HZ, by dismantling of fuel injector pump striping out of each of unserviceable parts, PT pump repair kit, gear pump assembly replacement of unserviceable parts and reassembling the FIP including calibration and pressure testing computerize for each FIP from micro service station including replacement of the following items : (i) PT Pump repair Kit Cat Part No.3880584 – 01 No (ii) Gear pump assembly Cat Part No.T-30344229– 01 No

Dismantling of self starter 24 volts of 320 / 400 KVA DG Set 415 volts 3 phase 4 wire 50HZ opening and segregating cleaning the serviceable parts for re-use, self starter servicing and greasing, re-assembling the self starter and replacement of following parts : (i) Carbon bush – 01 Set (ii) Brass plunger - 01 No (iii) Solenoid switch - 01 No (iv) Body Brass Nut – 04 Nos

Taking down the unserviceable spares / parts required for the periodical service / maintenance of 400 KVA DG Set 415 volts 3 phase 4 wire 50HZ, draining out the old engine oil, filling of new engine oil, top up coolant, cleaning and washing the oil sump with kerosene oil to make it free from dust and and unwated particles, cleaning of radiator throuhly with soda ash powder gressing and lubricant all mobile parts, replacement of unserviceable spares / parts with new ones as directed and making it fully functional and testing on full load in the presence of Engineer-in- Charge. Notes : Spares parts, coolant, Engine oil required for replacement shall be measured and paid separately as 'Supply only' under relevent item of this schedule.

Supply only following spares / parts suitable for 400 KVA DG Set 415 volts 3 phase 4 wire 50HZ :-

Air filter (Make : Kirloskar/Bosch)

Oil filter (Make : Kirloskar/Bosch)

Fuel filter (Primary) (Make : Kirloskar/Bosch)

Fuel filter (Secondary) (Make : Kirloskar/Bosch)

Oil pressure pipe

Hose pipe (Water pump inlet)

Hose pipe (Water bodyoutlet)

Solenoid switch.

Hose pipe (Fuel / radiator)

Relay Card

V-Belt

Water Pump

S&F as in repairs controller actuator (Governer control unit) suitable for 320 / 400 KVA DG Set. Input 24 V complete all as specified and directed. Make Kirloskar Model No. ESD 55500 serial No. IVB 37015.

Taking down the unserviceable spares / parts required for the periodical service / maintenance of 20/30/62.5/ 82.5/125 KVA DG Set 415 volts 3 phase 4 wire 50HZ including draining out the old engine oil, filling of new engine oil, top up coolant, cleaning and washing the oil sump with kerosene oil to make it free from dust and and unwated particles, cleaning of radiator throuhly with soda ash powder greasing and lubricting all mobile parts, replacement of unserviceable spares / parts with new ones as directed and making it fully functional and testing on full load in the presence of Engineer-in- Charge. Notes : Spares parts, coolant, Engine oil required for replacement shall be measured and paid separately as 'Supply only' under relevent item of this schedule.

Supply only following spares for 20/30/62.5/82.5/125 KVA DG Set 415 volts 3 phase 4 wire 50HZ :

Air filter (Make : Bosch/Mico/Leyparts)

Oil filter (Make : Bosch/Mico/Leyparts)

Fuel filter (Make : Bosch/Mico/Leyparts)

Oil pressure pipe

Hose pipe (Water pump inlet)

Hose pipe (Water bodyoutlet)

Solenoid switch.

Battery charger 12 V.

Display unit for controlling the DG Set in Manual/Auto Make : AE

MCB 3 Pole 63 Amps 415 Volts Make : C&S Cat Part No : QCSMB3D63

Hose Pipe (Fuel / Radiator)

Relay Card

V-Belt

Water Pump

Water Pump with body (Complete Assembly)

Repair & maintenance to fuel injector pump of 20 / 30 / 62.5 / 82.5 / 125 KVA DG Set 415 volts 3 phase 4 wire 50HZ, by dismantling of fuel injector pump and striping out of each of unserviceable parts, PT pump repair kit, gear pump assembly and replacement of unserviceable parts and reassembling the FIP including calibration and pressure testing computerize for each FIP from micro service station including replacement of the following items : (i) PT Pump repair Kit – 01 No (ii) Gear pump assembly - 01 No

Supply only Distilled water in the packing of 05 ltrs

Supply only Battery Terminal copper with nuts, bolts

Supply only Coolant for radiator of DG Sets

Supply only Engine oil 15W 40 Grade

Boring of holes under road, pavement hard standing by trench-less technology (mannually or mechanically) suitable for passing 80 mm bore GI pipe complete all as specified and directed.

Supply & Fixing as in repairs Pressure die cast aluminium housing, Heat resistance toughened glass, IP66 protection, better optics for uniform distribution LED street light fitting of 45 watt capacity complete with electrical connections from pole to light fitting by using new twin core aluminium cable. Make Crompton Greaves Cat part No. LSTP-45-CDL or equivalent in Philips/Surya/HPL.

S&F as in repairs Pressure die cast aluminium energy efficient LED street 25 watt fitting complete with electrical connections. Make CG, Cat part No. LSTS-25-CDL or equivalent in Philips / Surya / Syska

Supply & Fixing as in repairs GI bracket for mounting street light fittings made out of light grade 32 mm GI pipe and bent at an angle of 120 degree including fixing arrangement i.e. clamps, nuts, bolts etc complete all as specified and directed.

M&L as in repairs mild steel work in framed work such as straps, ties Clamps, Motor pumpset base etc., and similar work confirming to Fe 290 Gde E-165 fixed with nuts, bolts and washers or by welding where necessary and incl painting the surfaces with two coats of synthetic enamel paint of colour as approved over a coat of red oxide primer complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc complete all as specified and directed.

Taking down unserviceable street light / road light /security light / highmast light of any capacity / type from poles/wall at any height etc including removal of connection using labour / machinery equipment for maint / repair or to deposit in the storeyard / removal from site all as specified and as directed

Fixing only in its original place on poles / wall after and including necessary repair to street light / road light /security light / highmast light of any capacity / type replacement of defective parts at any height etc using labour / machinery equipment as required including making connection of the same and testing on the completion all as specified and directed. Note:- (i) Serviceable light fitting taken down vide item above shall be fixed under this item. (ii) All spares parts required forrepair will be measured and paid under relevent item of schedule.

S&F as in repairs analog time switch (Micro - Rex qt 31 Daily Time Switch) for measuring time intervals complete all as specified and directed.

Supply only the following sapres / parts for DG Sets / street lights :

MCCB, 3 Pole, 160 Amps, 415 Volts, 35 KA complete all as specified and directed. Make L&T or Equivalent in Legrand/Seimens.

Power Contractor 3 Pole 40Amps 415 Volts 50HZ Type ML-3 complete all as specified and directed. Make : L&T or Equivalent in Legrand/Seimens.

Power Contractor 3 Pole 70Amps 415 Volts 50HZ Type ML-4 complete all as specified and directed. Make : L&T or Equivalent in Legrand/Seimens.

LED Driver as per existing in site suitable for 45W street light LED fittings Make : Havells Cat Part No LHETAXU7PN6J045

LED Driver as per existing in site suitable for 45W street light LED fittings Make : HPL

LED Driver as per existing in site suitable for 20W security light LED fittings Make : HPL

S&F as in repairs battery, 12 V, 90 AH maintenance free 3 year warranty complete with copper connectopn lead and terminal for connection all as specified and directed.

S&F as in repairs cylindrical shape, pressure die-cast powder coated housing with PC difuser, efficient high output COB LED for garden, pathway etc. lighting IP-66 protection of capacity 10 W complete with electrical connections all as specified and directed. MAKE : Crompton Greaves Cat Part No LBLA1-10-CDL or equivalent in Philips / Havells.

S&F as in repairs LED bollard with robust design and efficient light distribution 10W capacity, IP rated, incl electrical connection using 3 core wire all as specified and directed. MAKE : Crompton Greaves Cat Part No. LBLSR-10-WW or equivalent in Philips / Havells.

Supply & Fixing as in repairs LED Driver suitable for garden light of make Crompton Greaves Cat Part No : LBLA2-10-CDL or equivalent in Bajaj / Havells.

Supply & Fixing as in repairs LED Driver suitable for garden light of Make Crompton Greaves Cat Part No : LBLA1-10-CDL or equivalent in Bajaj / Havells.

Supply & Fixing as in repairs LED Driver suitable for garden light of Make Havells Cat Part No : LHEVBDP7IN6K008

Supply and fixing in repairs LED flood light of 60W capacity with complete accessories and incl electrical connections all as specified and directed. Make : Crompton Greaves Cat Part No LFL-60-CDL/60 or equivalent in Philips / Havells / HPL .

Supply and Fixing as in repairs solar DC street light fitting, 12W incl necessary connection from battery to light fitting and solar plate to battery complete all as specified and as directed. Make : Havells, Bajaj or equivalent

Supply and Fixing in repairs solar plate collector cover plate (as per existing sample) made of toughened glass complete including copper wire 2.5 sqmm from collector plate to batteries and make it fully fuctional all as specified and directed. Make : Bajaj / Havells / Crompton Greaves

Supply and Fixing as in repairs LED flood light IP 65 PDC aesthetically designed with better thermal management of capacity 100W Make : CG . Cat Part No LFLN-100-CDL/60 or equivalent in HPL / Philips with complete accessories and duly prewired by using new 3 core 1.5 sqmm cable incl testing. Note :- The fitting will be fitted after executing the following jobs :- (a) Lowering the existing high mast lights ring with existing handle or by using motor. (b) Disconnecting all the electric connections of existing unserviceable sodium high mast lights. (c) Fixing the new LED Turbo floodlights, fitting by using nuts & bolts on high mast rings. (d) Testing the all LED fittings and uppering the high mast ring by using existing handle or by using motor.

Supply and Fixing as in repairs LED flood light IP 66 PDC housing. Heat resistant tempered glass for protection with 5KV surge protection of capacity 200W Make : CG . Cat Part No LSFO-200-CDL/60 or equivalent in HPL / Philips with complete accessories and duly prewired by using new 3 core 2.5 sqmm cable from junction box to LED fitting incl testing. Note :- The fitting will be fitted after executing the following jobs :- (a) Disconnecting the electric connections and Lowering the existing unserviceable Watch Tower lights of type HPSV 500W at any height by using machinery equipments. (b) Fixing the new LED floodlight fitting of 200W by using nuts & bolts on watch tower poles. (c) Testing the LED Fitting to entire satisfication of Engr-in-Charge.

Supply and Fixing as in repairs water proof colourful LED light fitting of 30 Watt 12 Volt suitable for water fountain including all electrical connections from LT Panel to Light fitting and mounting accessories complete all as specified and as directed.. Make : Havells / Syska / CG / Bajaj / HPL

Supply and Fixing as in repairs aluminium thimble locally available best quality suitable for XLPE cable 50sqmm size, crimping with crimping tool incl nuts, bolts washers etc. complete all as specified and diretced.

All as per description of serial item No. 51 here in before but for cable size 70 sqmm

All as per description of serial item No. 51 here in before but for cable size 95 sqmm

All as per description of serial item No. 51 here in before but for cable size 120 sqmm

M&L servicing of air circuit breaker of capacity 1000 Amps and Make L&T Cat Part No. CN-CS 1000 S1 incl replacement of minor parts and oil to make it fully functional complete all as specified and directed. Note:- T&P required shall be arranged by the contractor at his own and the cost thereof shall be deemed included in unit quoted rate.

All as per description of serial item No. 55 here in before but capacity 800 Amp and Make L&T Cat Part No. CN-CS 800 S1

All as per description of serial item No. 55 here in before but fcapacity 630 Amp and Make L&T Cat Part No. CN-CS 630 S1

S&F as in repairs galvanised steel tubing 80mm bore medium grade including all fittings such as bend, socket, reducer fixed with saddles, clamps etc along pole, laid under floors / plinths / trenches for passing of cable or for fixing light fittings incl necessary drilling, threading etc. complete all as specified and directed. Note: MS clamps with nuts & bolts shall be measured and paid for separtely under respective item of this schedule.

All as per description of serial item No. 58 here in before but 50mm bore

All as per description of serial item No. 58 here in before but 40mm bore

ROSHAN LAL AHUJA

LAKSHMI ASSOCIATES

M/S BUDHRAM BISHNOI

MAHAVIR CONSTRUCTION CO

national engineering

Beenu Co. Company