Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.8 LAdmitted-Finance | Admitted-Finance | |
| 2 | ₹5.8 LAdmitted-Finance | Admitted-Finance | |
| 3 | ₹6.0 LAdmitted-Finance | Admitted-Finance | |
| 4 | ₹6.0 LAdmitted-Finance | Admitted-Finance | |
| 5 | ₹6.6 LAdmitted-Finance | Admitted-Finance |
| Sl No | Description | Qty | Unit | HYDROCON ENGINEERS | DEEPAK ENTERPRISES | Goodwill Enterprises | Raj Engineering Co. | Volts And Watts Electronics Pvt. ltd. |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of old pump set after disconnecting from suction and delivery pipeline, decoupling with motor, removing of electric connections from motor and from LT Panel etc i/c taking out old pump from existing system etc., closing of suction & delivery line with the help of suitable size dead flange. | 1 | Job | 5,000 ₹5,900 | 1,000 ₹1,180 Lowest | 8,500 ₹10,030 | 7,500 ₹8,850 | 10,000 ₹11,800 |
| 2.00 | Providing of horizontal split casing centrifugal pump suitable for potable water Having flanged suction & delivery with CI impeller, CI body, S.S. Shaft & S.S. Sleeve suitable for head 55-60 mtr., Discharge 198 m3 /hr., Suction & delivery size 150 X125 mm, 1475 RPM with Suitable for prime mover (motor) of capacity 50 HP. Make of Pump:- Wilo Matter & Platt/KBL /KSB/Lubi/Jyoti/ DJB approved make.
Providing of 50 HP 1475 RPM Squirrel case induction motor suitable to operate on 430V,3 phase,50 Hz, horizontal foot mounted confirming to IEC:60034-1.
Make of Motor- ABB/Kirloskar electric Co./KSB/Jyoti/CG POWER/DJB Approved. | 1 | Set | 4,08,000 ₹4,81,440 | 3,60,000 ₹4,24,800 | 3,45,000 ₹4,07,100 | 3,12,000 ₹3,68,160 | 2,60,000 ₹3,06,800 Lowest |
| 3.00 | Dismantling and taking out M S Base frame from CC foundation after cutting of nut bolts, Breaking the Damaged RCC foundation of the old pump set by the help of concrete breaker and labour. Also taking out malba from the pump house by manual labour & dumping the same as per directions. | 1 | Job | 5,000 ₹5,900 Lowest | 10,000 ₹11,800 | 12,500 ₹14,750 | 5,500 ₹6,490 | 15,000 ₹17,700 |
| 4.00 | Making a RCC foundation of new Pump Set of material Ratio 1:1.5:3 (cement, coarse sand and graded stone aggregates) concrete with foundation/rag bolts as per site requirement. Providing & fixing of M.S base frame of suitable size with nut bolt & washer etc for pump sets as per site requirement. | 1 | Job | 50,000 ₹59,000 | 10,000 ₹11,800 | 18,200 ₹21,476 | 7,500 ₹8,850 Lowest | 40,000 ₹47,200 |
| 5.00 | Providing & fixing of Suitable size coupling for pump set with Suitable size coupling guard & fixing with nut bolt & washer etc as per site requirement. | 1 | Job | 5,000 ₹5,900 Lowest | 10,000 ₹11,800 | 12,500 ₹14,750 | 7,500 ₹8,850 | 25,000 ₹29,500 |
| 6.00 | Supply of PVC Insulated single core Flexible Copper Cable of size 50 Sq.mm Make : Grandley / Gloster/Havells/DJB approved | 100 | Mtr | 50,000 ₹59,000 | 50,000 ₹59,000 | 45,000 ₹53,100 | 41,000 ₹48,380 Lowest | 70,000 ₹82,600 |
| 7.00 | Laying and connection of of 50 Sq.mm single core copper cable from LT panel to pump set with suitable size lugs, nut bolt & washer etc as per site requirement and with proper dressing and clamping. | 1 | Job | 1,000 ₹1,180 Lowest | 15,000 ₹17,700 | 8,500 ₹10,030 | 6,500 ₹7,670 | 10,000 ₹11,800 |
| 8.00 | Installation/fixing of new pump set on new base frame & RCC foundation and fixing of sluice Valves, NRVs, etc and making All electrical connections of motor.( Sluice valve & NRV Shall be provided by department). | 1 | Job | 25,000 ₹29,500 | 15,000 ₹17,700 | 10,500 ₹12,390 | 7,500 ₹8,850 Lowest | 25,000 ₹29,500 |
| 9.00 | Providing of suitable size MS Gap piece, flange, reducer, nut bolts and washer, rubber packing etc. Making suction & delivery connections with pump set with the help of MS Gap piece, flange, Suitable size reducer, nut bolts, rubber packing etc as per site Requirement by using Gas cutter, welding set, manual labour etc. | 1 | Job | 5,000 ₹5,900 Lowest | 30,000 ₹35,400 | 12,000 ₹14,160 | 5,500 ₹6,490 | 25,000 ₹29,500 |
| 10.00 | Testing & commissioning of Pump set on NO load and on full load as per the complete satisfaction of the Engineer –in-charge. | 1 | Job | 2,500 ₹2,950 Lowest | 10,000 ₹11,800 | 15,000 ₹17,700 | 7,500 ₹8,850 | 25,000 ₹29,500 |
Tender Value
Refer Docs
EMD Value
₹15,000
Closing Date
25 Jul 2025, 2:00 pmClosed
EXECUTIVE ENGINEER (EM) M-10
GREATER KAILASH, PART-I, NEW DELHI
Replacement of Pump sets and other allied works at Satya Nikitan BPS in R.K Puram AC-44.
2025_DJB_275650_22
NIT No. 7/EE(EM)M-10/(25-26)
Open Tender
Electrical Work/ Equipment
Works
30 days
EXECUTIVE ENGINEER (EM) M-10
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Delhi Jal Board
₹15,000
Yes
18 Sept 2025
18 Jul 2025
25 Jul 2025
18 Jul 2025
25 Jul 2025
18 Jul 2025
Dismantling of old pump set after disconnecting from suction and delivery pipeline, decoupling with motor, removing of electric connections from motor and from LT Panel etc i/c taking out old pump from existing system etc., closing of suction & delivery line with the help of suitable size dead flange.
Providing of horizontal split casing centrifugal pump suitable for potable water Having flanged suction & delivery with CI impeller, CI body, S.S. Shaft & S.S. Sleeve suitable for head 55-60 mtr., Discharge 198 m3 /hr., Suction & delivery size 150 X125 mm, 1475 RPM with Suitable for prime mover (motor) of capacity 50 HP. Make of Pump:- Wilo Matter & Platt/KBL /KSB/Lubi/Jyoti/ DJB approved make. Providing of 50 HP 1475 RPM Squirrel case induction motor suitable to operate on 430V,3 phase,50 Hz, horizontal foot mounted confirming to IEC:60034-1. Make of Motor- ABB/Kirloskar electric Co./KSB/Jyoti/CG POWER/DJB Approved.
Dismantling and taking out M S Base frame from CC foundation after cutting of nut bolts, Breaking the Damaged RCC foundation of the old pump set by the help of concrete breaker and labour. Also taking out malba from the pump house by manual labour & dumping the same as per directions.
Making a RCC foundation of new Pump Set of material Ratio 1:1.5:3 (cement, coarse sand and graded stone aggregates) concrete with foundation/rag bolts as per site requirement. Providing & fixing of M.S base frame of suitable size with nut bolt & washer etc for pump sets as per site requirement.
Providing & fixing of Suitable size coupling for pump set with Suitable size coupling guard & fixing with nut bolt & washer etc as per site requirement.
Supply of PVC Insulated single core Flexible Copper Cable of size 50 Sq.mm Make : Grandley / Gloster/Havells/DJB approved
Laying and connection of of 50 Sq.mm single core copper cable from LT panel to pump set with suitable size lugs, nut bolt & washer etc as per site requirement and with proper dressing and clamping.
Installation/fixing of new pump set on new base frame & RCC foundation and fixing of sluice Valves, NRVs, etc and making All electrical connections of motor.( Sluice valve & NRV Shall be provided by department).
Providing of suitable size MS Gap piece, flange, reducer, nut bolts and washer, rubber packing etc. Making suction & delivery connections with pump set with the help of MS Gap piece, flange, Suitable size reducer, nut bolts, rubber packing etc as per site Requirement by using Gas cutter, welding set, manual labour etc.
Testing & commissioning of Pump set on NO load and on full load as per the complete satisfaction of the Engineer –in-charge.
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .