REPAIRS / MAINT OF INTERNAL ELECTRIFICATION WORKS AT ZONE-I ZONE-IV A AND ZONE IV B AT LEKHAPANI UNDER GE LEKHAPANI

Amount

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge.

M&L for Point wiring complete as specified with 1100 volt grade 1.5 sq.mm. (nominal area) single core PVC insulated FRLSH unsheathed cable multi-stranded copper conductor drawn through and including PVC casing and capping (size of casing caping as required at site but not less than 20mm) , with all fittings, fixed on wall/ceiling /floor including modular box suitable for housing modular pattern switches/ sockets/ regulators etc. and duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified & directed for :- Note :- (i) Modular Plates & Covers and Modular Metal Boxes/PVC Boxes will measured and paid separately under relavant items.(ii) Necessary PVC rigid cap/ cover/ junction boxes/ flexible pipe as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (iii) The wiring shall be done strietly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (a) One light /Fan /Ex Fan/Bell/ point controlled by one, one way switch/bell push. (b) One socket outlet 3 or 5 Pin, 10 Amp on independent board

All as per Srl Item No 2.00 above but for One socket outlet 3 or 5 Pin, 10 Amp on same board complete all as specified & as directed.

All as per Ser item No 2 above but with using 2.5 sqmm copper cable for socket outlet 5/6 pin 20 Amps in and including PVC casing and capping complete all as specified and as directed

M&L for Point wiring (concealed type) complete as specified with 1100 volt grade 1.5 sq.mm. (nominal area) single core PVC insulated FRLSH unsheathed cable multi-stranded copper conductor drawn through and including concealed type rigid non-metallic PVC conduit of suitable size but not less than 20mm dia , with all fittings, fixed on wall/ceiling /floor including modular box suitable for housing modular pattern switches/ sockets/ regulators etc. and duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified & directed for :- Note :- (i) Modular Plates & Covers and Modular Metal Boxes/PVC Boxes will measured and paid separately under relavant items.(ii) Necessary PVC rigid / junction boxes/ flexible pipe as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates/cover shall deemed to be included in the quoted rate. (iii) The wiring shall be done strietly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (a) One light /Fan /Ex Fan/Bell point controlled by one, one way switch (b) One socket outlet 3 or 5 Pin, 10 Amp on independent board

All as per Ser item No 5 above but for One socket outlet 3 or 5 Pin, 10 Amp on same board. complete all as specified and as directed

All as per Ser item No 5 above but with using 2.5 sqmm copper cable for socket outlet 3 or 6 pin 20 Amps.in and including concealed type rigid PVC conduit complete all as specified and as directed

S&F modular switch 10 Amp one way 230 V AC complete all as specified and directed by Engineer-in-charge.

S&F modular bell push, 10 Amps, 1 module single pole complete all as specified and directed.

S&F modular switch 20 Amp one way 230 V AC complete all as specified and directed by Engineer-in-charge.

S&F modular socket outlet 10 Amp intel multi socket for all pins 230 V AC complete all as specified and directed by Engineer-in-charge.

S&F modular socket outlet 20Amp and 10/20 Amp heavy duty 230 V AC complete all as specified and directed by Engineer-in-charge.

S&F modular type fan step regulator up to 120W - 2 module complete all as specified and directed.

S&F 2 module PVC Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.

S&F 3 module PVC Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.

S&F 4 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.

S&F 6 module PVC Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.

S&F 8 module PVC Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.

S&F for switch paino flush type/bell push 6 Amps single pole one way 230 volts AC circuit as fixed in repairs complete all as specified and directed.

S&F switch socket combination 2 in 1 3/5 pin 6 Amps 240 volts flush type multipurpose as fixed in repairs complete all as specified and as directed.

S&F switch socket combination 2 in 1 5/6 pin, 16 Amps flush type 240 Volts universal as fixed in repairs complete all as specified and as directed.

S&F Electronic fan regulator 230 volts , step type, flush type, ISI Marked, as fixed in repairs complete all as specified and as directed.

M&L for ceiling rose, surface bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate, isolated body (ISI Marked)

S&F call bell AC 230 Volts single pole complete with all accessories internally pre-wired and fixed to walls/ceiling on PVC Box with screw, all as specified and directed.

S&F PVC/polycarbonate angular lamp holder insulated body with back plate angle type suitable for batten fitting complete all as specified and directed by Engr-in-charge .

S&F Inverter type LED tube light batten 4 ft. 1 x 18/20 watt, 230 volts inbuilt Lithium ion battery with charging time 8 to 10 Hrs and back up time upto 4 Hrs complete with all accessories internally pre-wired and fixed to walls/ceiling with screw and connecting up with twin core flexible copper conductor cable with suitable size, including taking down old unsv fitting complete all as specified and directed. complete all as specified and directed.

S&F Inverter type LED tube light batten 4 ft. 1 x 18/20 watt, 230 volts inbuilt Lithium ion battery with charging time 8 to 10 Hrs and back up time upto 4 Hrs as fixed in repairs complete with all accessories internally pre-wired and fixed to walls/ceiling with screw and connecting up with twin core flexible copper conductor cable with suitable size, including taking down old unsv fitting complete all as specified and directed. complete all as specified and directed.

S&F LED tube light fitting 2 ft. 1 x 9/10 watt, 230 volts, complete with all accessories internally pre-wired and fixed to walls/ceiling with screw including connecting up with twin core flexible copper conductor cable with suitable size, complete all as specified and directed.

S&F LED tube light fitting 2 ft. 1 x 9/10 watt 230 volts , as fixed in repairs complete with all accessories internally pre-wired and fixed to walls/ceiling with screw including connecting up with twin core flexible copper conductor cable with suitable size, including taking down old unsv fitting complete all as specified and directed.

S&F LED Bulk head fitting 10 watt in engineering plastic housing with clear prismatic diffuser complete with all accessories internally pre-wired and fixed to walls/ceiling on PVC Box with screw including connecting up with twin core flexible copper conductor cable with suitable size, including taking down old unsv fitting complete all as specified and directed.

S&F LED Lamp 9 watt Self ballasted type with PBT body shell and DC Diffuser as fixed in repairs complete all as specified and directed.

S&F LED Lamp 7 watt Self ballasted type with PBT body shell and DC Diffuser as fixed in repairs complete all as specified and directed.

S&F Aesthetically designed recessed mounted panel 1x1 Feet LED light 18/24 Watt flat round /square type for surface/ceiling mounting which provides soft-light and glare free symmetrical illumination including taking down old unsv light fitting all as specified and directed.

S&F Aesthetically designed recessed mounted panel 2x2 Feet LED light 30/36 Watt flat square type for surface/ceiling mounting which provides soft-light and glare free symmetrical illumination including taking down old unsv light fitting all as specified and directed.

S&F LED building security light fitting 25W new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection and impact resistance of IK07 incl mounting bracket with clamp of suitable size and connection complete incl taking down old unsv one, all as specified and directed.

M&L for providing sub main wiring with two single core 6.00 Sqmm (nominal area) PVC Insulated FRLSH unsheathed multi stranded copper conductor cable 1100 volts grade drawing through PVC casing-capping/ PVC Conduit complete as per direction/site rquirement including 6.00 Sqmm PVC insulated unsheathed multi stranded FRLSH single core copper conductor cable for earth wire including taking down/removing old one and making good distrubed surfaces of walls, floors, etc complete all as specified and directed. Note : (i) Three runs of single core 6.00 Sqmm multi stranded copper cable and one run of casing caping/conduit shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item (iii) Earth wire run inside the casing capping/conduit.

All as per Ser item No 36 above but with using 4.00 sqmm copper cable (nominal area) complete all as specified & as directed.

S&F MCB Changeover 4 pole, 63 Amps, 230V, AC 50 Hz (Two Way centre off Switch) with suitable accessories and connecting the cable end with suitable size lugs, nuts/bolts/washers etc, including taking out the existing unserviceable complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one number single pole MCB 20 Amps , 240 Volts complete all as specified and as directed.

Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures etc complete from existing main boards and removing from site all complete all as directed.

Supply & fix Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 8 way (2 + 6 way) single pole and neutral link complete all as directed by Engineer-in-Charge.

Supply & fix Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 4 way (2 + 2 way) single pole and neutral link complete all as directed by Engineer-in-Charge.

S&F MCB 25 to 32 Amp SP&N, 240 volts 10 KA 'C' series with all incoming/outgoing connections with proper size lugs including taking down old unserviceable one complete all as specified and directed.

S&F MCB 06 to 32 Amp SP, 240 voltss 10 KA 'C' series with all incoming/outgoing connection with proper size lugs including taking down old unserviceable complete all as specified and directed.

S&F in repair PVC rigid rectangular blocks, with back plate complete of sizes 10x10x4.5 cm as fixed in repair complete all as specified and as directed.

All as per item No 45.00 here-in-before but size 17.5x10x4.5 cm complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways complete all as specified & directed by Engineer-in-Charge.

MAA COMMUNICATION (BID ID -3101028)

M/S PRABIR ROY (BID ID -3097878)

M/S SINGH TRADERS (BID ID -3119887)

M/s PRABIR ENTERPRISE (BID ID -3122378)

M/S. MATA VAISHNO DEVI ENTERPRISE (BID ID -3106759)