REPAIR/ REPLACEMENT TO FENCING, GATE AND REPAIR TO HARDSTANDING, PATHWAY, DRAIN, COMPOUND WALL ETC OF AGE B/R-II UNDER GE (WEST) JALANDHAR CANTT

Amount

Dismantling of fencing posts/ struts of any description (wood, steel or RCC) embedded in concrete, brick work, masonry etc. including taking out embedded portion and making good to disturbed surface complete all as specified and directed.

Dismantling of fencing wire mesh, any type complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

Demolition of brick work or stone/ boulder masonary built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Dismantling structural steel work including doors, gates, flats and MS round bars but excluding framed truss etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thick below or above ground level complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft/ loose soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed.

Supply and fixing for hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts ans struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long complete all as specified and directed.

Supply and fixing chain link MS galvanised fencing any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. Note : Size of Mesh 75x75x3mm

Supply and fixing mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fixing MS flat iron as in hold fast, wall ties etc conforming Fe-290, Gde E-165 complete all as specified and directed.

Material and labour for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. in repairs complete all as specified and directed (each line wire to be measured separately). Note: The rate quoted by the contractor shall be inclusive of straightening of existing MS struts required for fixing of barbed wire.

Material and labour for framed work as in doors, gates, guard bar etc of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) Quality B complete all as specified and as directed.

Material and labour for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) but except brick complete all as specified and directed. (Old bricks dismantled under respective item shall be reused with cleaning of old bricks.)

Material and labour for 80mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-40 grade, with grey cement and no pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed. Note: Sand for sand cushioning shall be measured and paid for separately.

Material and labour for chequered cement concrete coloured tiles 25cm x 25cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Material and labour for 100mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone agg) as in sub base of flooring/ hard standing complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, padding, roof kerbs/mud stops and rounded or chamfered on edge including necessary form work etc. complete all as specified and as directed.

Material and labour for preparation of old steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster of any description on brick or stone masonary, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces finished even smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete (reinforced) in ground floors and pavings not exc 15 cm thick below or above ground level for RCC jallies etc. work complete all as specified and directed.

Material and labour for Providing precast cement concrete type B-0 1:2:4 (12.5mm graded aggregate) louvres and jallies, 40mm thick (measured solid), including all mouldings and set in cement mortar in 1:4. complete all as specified and directed.

Material and labour for plain cement concrete1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channels and drains walls or retaining walls, any thickness, size or shape including pillasters, buttresses columns, pillars, boundary pillars and posts including necessary form work etc (including caps and bases) complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) but except bricks complete all as specified and directed.

Material and labour for repairing 1.25 mm thick laths Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and greasing as required, erected in position as indicated, complete push pull or manual type complete all as specified by Engr-in-charge.

Material and labour for grubbing up bushes, tree truck of trunk portion n. exc 10cm grith including cutting of trees/bushes grown in soil/ sides of drainage area/ inside of drainage/ diging out tree with roots and making good disturbed area of wall/roofs with PCC 1:3:6 type and using 20mm graded stone aggregate complete all as specified and as directed.

M/S Kuldip Construction Co.