PAINTING TO RUNWAY, TAXI TRACK, DISPERSAL, REPAIR/ REPLACEMENT OF DTGM, REPAIRS TO JOINERIES, INTERNAL WATER SUPPLY, SANITARY FITTINGS, FLOORING, PLASTERING AND ROOF AT INS BAAZ AND ARMY LAND UNDER GE(I) CAMPBELL BAY

Amount

M & L for removal of damaged portion and pop out broken corners, pot holes and developed cracks of rigid concrete surface including cutting out concrete with concrete cutting machine, chiseling of concrete to shape as per site requirement, removing loose scrapped material to a distance of 100 m away from the runway or dispersal edge, cleaning the surface, removing dust dirt with compressed air pressure, and priming the surface with epoxy resin based primer for concrete surface as per manufacturers instructions complete all as specified and as directed. Make : Fosroc (Nito Prime -25 Primer)/ Pidilite/ Dr. Fixit/ Chemistik/ STP

M & L for high strength epoxy concrete of Make : Fosroc (expocrete EC) or equivalent in Dr.Fixit/ Chemistik/ STP, filling for area to be prepared under Item no.1 above, high strength epoxy based concrete shall be prepared by mixing 27.5 Kg expocrete EC with 30 Kg stone aggregate of grade n.exc 10mm as per mixing ratio of epoxy by weight in Kg Base (B) , Hardener (H), Fine filler (FF), coarse aggregate (CA) are (4.537:2.145:20.818:30) and material shall be weighed accurately in the specified proportions, the epoxy concrete shall be applied in the prepared groove within 45 mins of application of resin primer or as directed by Engr-in-Charge or as per manufacturer's instructions complete all as specified and as directed.

M & L for preparation of old painted surface of concrete on runway dispersal and applying one coat of runway marking aqua based paint to existing lines dashes, arrows, letters, etc on pavement/runway and like exc 10 cm wide, white, golden yellow, grey complete all as specified and as directed.

M & L for preparation of old treated bituminous surfaces by cleaning all dust, dirt etc, with wire brushes, watering and drying the surfaces by fanning with gunny bags etc and applying one coat of aqua based runway marking paint of approved make and white colour complete all as specified and as directed.

Distmantling of "Distance Go Marker: (DTGM) sign board, triangle shaped of size 122cm x150cm made up of fibre sheet complete all as specified and directed.

S & F "Distance GO Marker" (DTGM) sign board, triangular shape 122cm x 150cm sign board, with fibre sheets, perforated designed marker made from ultra-violet resitant exterior grade FGRP material bonded with chemical epoxy having ribs anti-terminate coated wooden in cubs at the top centre and bottom horizontally 50 x 20mm size and vertical 25 x20mm size, ( letters and figures to be measured under Item No 8) complete all as specified and as directed. Make : Greenlite, Cat No : 10-03 DTGMFG 122 x 150 or equivalent in 3M/ Dark Eye/ Vibgyor

S & F in repairs "Distance GO Marker" (DTGM) sign board, 122 cm x 150cm sign board, with fibre sheets, perforated designed marker made from ultra-violet resitant exterior grade FGRP material bonded with chemical epoxy ( letters and figures to be measured under Item No 8) complete all as specified and as directed. Make : Greenlite, Cat No : 10-03 DTGMFG 122x150 or equivalent in 3M/ Dark Eye/ Vibgyor

S & F of letters/ figures of height exc 1000mm and n.exc 1200mm with retro reflective self adhesive red /yellow colour tape including taking out unserviceable letters / figures of any description complete all as specified and as directed.

S & F 50mm width of retro reflective self adhesive red /yellow colour tape complete all as specified and as directed.

M & L for second class hardwood of clean sawn timber fixed in repairs to replace old and decayed timber to remove old portion complete all as specified and as directed.

Demolition of precast concrete article and precast concrete walling, built in cement mortar including all quoins, arches pillars etc., and removing unserviceable debris off the premises all as specified and as directed.

M & L for providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cover slabs, drains and similar articles with plain faces set in CM (1:6) complete all as specified and as directed. Note : Reinforcement shall be measured and paid separately.

M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:4) complete all as specified and directed.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floor and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removing rubbish to a distance n.exc 250 m all as specified and as directed.

M & L for 4mm thick non asbestos fibre cement building board fixed to timber /GI / Aluminium frame work with screws in ceiling including S & F anodised aluminium snap grid frame work of size 605mm x 605mm and aluminium sections for false ceiling main /cross tee of size 36.5mm x 25mm x 2.4mm, weighing 0.24 Kg/RM and wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/RM and including S & F hangers 4mm dia GI (upto 1200mm length) adjoining level fixed in roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including dismantling old celing board complete all as specified and as directed.

M & L for joint free non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc. 0.11 Sq.m but n. exc. 0.18 Sq.m (400 x 400mm size) in floors etc., set and jointed in neat slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer 15mm thick in CM (1:6) for laying floor finishes complete all as specified and as directed.

M & L for glazed ceramic tiles coloured of size 350 x 250 mm x 7mm /450 x 250 x 7mm thick) on vertical surfaces of wall such as dado, skirting etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering/ backing coat of 10mm thick in CM (1:3) complete all as specified and as directed.

M & L for providing 150mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in bed / floor / paving /hard standing, surface finished fair and even complete all as specified and as directed.

M & L for for forming construction (dummy) joints 65mm x 10mm wide filled with sealing compound grade A complete all as specified and as directed.

M & L for providing 75mm thick PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in plinth protection finished cement concrete surfaces finished even smooth without using extra cement including necessary construction joint complete all as specified and as directed.

S & F mild steel work as in window guard bars, plain, let in and fixed indipendently in wooden frames and similar work cofirming to to Fe -290 Gde E-165 etc complete all as specified and as directed.

S & F in repairs for anodised powder coated aluminium frame for partition with one or more rebates including joining cleat for fixing etc., (minimum thickness of powder coating 50 micron) complete all as specified and as directed.

Taking down wooden / aluminium / Iron / PVC chowkhats or frames with shutters (without taking off shutter from frame) not.exc 1.5 Sqm each complete all as specified and as directed.

Taking down wooden / aluminium / Iron / PVC chowkhats or frames with shutters (without taking off shutter from frame) exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description n.exc 1 Sqm each and removing to or stores complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and removing to stores complete all as specified and as directed.

M & L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in fixing of hold fast, bed blocks etc including necessary form work as required complete all as specified and as directed.

S & F for MS flat iron bent to shape, holes drilled etc complete as in hold fast & wind ties, clamps etc including one coat of red oxide paint complete all as specified and as directed.

M & L for well seasoned second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified and as directed.

S & F second class hard wood of 35mm thick factory made plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats complete all as specified and as directed.

S & F second class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed.

S & F second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed.

S & F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

M & L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) on walls complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame covered with heat moulded wood grain printed PVC sheet (used instead of plain colour PVC sheet) with 5mm thick x 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading, panelling of wood grain printed PVC sheet to fit in the mild frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet (used instead of plain colour PVC sheet) and edges painted to match with the printed sheet, reinforced with mild steel square tube in opening as per specification & drawing complete all as specified and as directed.

S & F 100mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 300mm long aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F aluminium extruded section door closer hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

S & F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door shutter complete all as specified and as directed.

S & F in repairs for Harrison rails/ curtain rod mild steel, chromium plated with fixing brackets, stops, rollers etc.,for windows, doors opening etc complete all as specified and as directed.

S & F in repairs mild steel, chromium plated knobs / brackets for fixing curtain rod complete all as specified and as directed.

S & F in repairs, health faucet 15mm dia with 1.5 meter long easy flex tube in chromium finish and wall look complete all as specified and as directed.

S & F in repairs PVC toilet cup board cabinet, with shutters having mirror on shutter of size 47 cm x 35 cm x 15 cm complete all as specified and as directed.

S & F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane complete all as specified and as directed.

S & F 3mm thick figured glass, pin headed type and glazing with oil putty in square n. exc. 0.5 Sqm in each pane complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connections including supply and fixing of GI water tubing of 15 mm dia, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, ceiling, and laid on floors complete all as specified and as directed.

S & F in repairs of 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs of 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repairs brass chromium plated shower rose with shower arm of size125mm with swivel joints fixing to steel pipes complete all as specified and as directed.

S & F in repairs, 15mm dia chromium plated stop valves, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repairs PVC flexible connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repairs 10 ltr capacity, PVC low level flushing cistern, with ball valve and handle /push button 32 mm dia flush pipe etc complete & connecting to WC including taking down unserviceable cistern complete all as specified and as directed.

S & F in repairs of 40 mm bore of pipe low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ cm2 fixed to wall, ceiling or in floors complete all as specified and as directed.

S & F in repair tubular towel rail 20mm dia, D type 600mm long between flanges of brass chromium plated fixed with and including CP brass screws complete all as specified and as directed. Make :Jaquar, Cat Part No. ACN-1111SM or equivalent in Prayag/ Cera/ Parryware

S & F in repairs vitreous china squatting pan Orissa Pattern of size 580 x 440mm white with integral foot rest first quality with 100 mm dia 'P' or 'S' trap, ISI marked including provision of lime concrete bedding excluding flush pipe complete all as specified and as directed.

S & F in repair vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts removing the existing one, making good all connections complete all as specified and as directed.

S & F in repairs vitreous china urinals, bowl type, white (back or corner wall type) of size 465 x 355 x 265 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement , including fixing urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and as directed.

S & F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc. complete all as specified and as directed.

S & F in repairs grating round 140 mm size of PTMT, minimum wt 50gms. outlet with grating including jointing with solvent cement complete all as specified and as directed.

S & F in repairs PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.

S & F in repairs 110mm dia PVC (SWR) plain bends any radius with or without access door as required complete all as specified and as directed.

S & F in repairs PVC (SWR) multi floor trap 75mm dia. outlet with grating including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 32 mm dia waste fittings,brass chromium plated for glazed ware sinks, basins etc, with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over one coat of primer ( priming the plastered and other surface with alkali resistant priming paint) complete all as specified and as directed.

M & L for preparation of existing plastered surfaces and applying two coats of oil bound distemper over one coat of suitable thick wall care putty after complete removal of existing any type of treatment over wall complete all as specified and as directed.

M & L for preparation of old painted surfaces of walls painted surfaces and applying a coat of cement base paint complete all as specified and as directed.

M & L for preparation of old painted surfaces and applying one coat of distemper oil emulsion. complete all as specified and as directed.

M & L for preparation of old painted surfaces of wall and applying one coat of white wash complete all as specified and as directed.

M & L for preparation of old painted wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (ordinary tint ) complete all as specified and as directed.

M & L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer all as specified and as directed.

M & L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and including a coat of red oxide primer all as specified and as directed.

S & F powder coated aluminium (minimum thickness of powder coating 50 micron) folr shutters of doors, windows and ventilators including providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with extruded built up standard tubular sections /appropriate Z sections and other sections of appropriate make confirming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size including filling up the gaps at the junctions ie at top, bottom and side with required EPDM rubber/neoprene gasket etc., all sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, all snap beading for glazing paneling CP brass /stainless steel screws all complete all as specified and directed.

S & F in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs PVC waste pipe 32mm dia size in any locations complete all as specified and as directed.

M & L for prelaminated particle board 18/19mm thick interior grade prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame work all as specified and as directed.

T.M.RAMANATHAN AND SONS

RSL Construction

M/S RAJBUILDERS

MAHESWARI CONSTRUCTIONS

M/S G S GREWAL

ASHOK BISWAS

M/S Sudhir Kumar Gupta