PERIODICAL SERVICES AND WELCOME MAINT TO BLDG OF ZONE B UNDER AOR OF AGE BR DETT B OF GE 862 EWS

Amount

M & L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, Including demolition of old brick work or stone / boulder or concrete block masonry, complete all as speified and as directed.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M & L for Rendering 15 mm thick on fair faces of brick, stone or concrete surface in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a one coat primer complete all as specified and directed.

M & L for preparation of old plastered surfaces of wall and applying one coat of distemper oil emulsion, complete all as specified and directed.

M & L for 3mm thick wall care putty on wall complete all as specified and directed.

M & L for preparation of old decorated plastered surface in Ceiling etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy oil and greasy spots and applying one coat of lime white wash, complete all as specified and directed.

M & L for rubbing, cleaning and smooth finishing by sand paper on internal wall surfaces and applying two coats of acryllic texture paint colour, Shade and design as approved by Engr in charge over and including 3mm thick wall care putty, complete all as specified and directed .

M & L for rendering 5 mm thick in cement mortar 1:4 with water proofing compound @ 3% by weight of cement over 10mm thick in CM 1:6 on external surfaces of walls of block masonry finished even & smooth without using extra cement, including wiremesh wherever required and rendering height up to four (04) storey building complete all as specified and as directed. (Note: The rate to be included integral water proofing compound).

M & L for preparation of new plastered surfaces of walls and applying two coats of exterior weather proof paint of apex ultima of over and including a coat of primer, complete all as specified and directed.

M & L for Complete removal of existing treatment on old plastered wall/roof surfaces including cornices and chajjas etc and applying two coats of exterior weather coat paint of Apex Ultima of Asian or equivalent make, complete all as specified and directed.

M & L for finishing walls with textured exterior paint of required shade New work (two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm including 3mm thick wall care putty over plastered surface to prepare surface even and smooth, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wood and wood based surface incl preparation complete all as specified and directed.

M & L for preparation of old wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel or iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of Synthetic enamel paint,omplete all as specifed and directed.

M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 15 mm bore and connections, complete all as specifed and directed.

M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 20 mm bore and connections, complete all as specifed and directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) bends of any radius with access to door, complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches/wall complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) bends of any radius with access to door, complete all as specified and directed.

M&L 18-20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc including taking down old tile complete all as specified and directed.

S&F in repair viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality complete all as specified and directed.

S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 680x470 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern with flush pipe, complete all as specified and directed.

S & F in repairs for sink with draining board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including waste pipe, fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.

Supply and fixing in repairs for viterous China wash basin, white flat back, size 550x400mm including waste pipe,CP Pillar taps, waste chain and plug and porcelan stopper brackets complete all as specified and as directed.

S & F in repair for 15 mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair for 15mm bore brass chromium plated wall mixer fixed with shower rose and connecting to wall mixer, complete all as specified and directed.

S & F in repair for 15 mm bore brass CP wash hand basin mixer hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F rotational moulded polythene two layered water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity fixed with brass tank nipples,including Ball brass valves suitable for 20 mm bore complete all as specified in SSR Part I Incl dismantling of existing tank and removing to store, complete all as specified and directed.

S&F rotational moulded polythene water storage tank two layered (Cylindrical vertical withclosed top) hoisted and fixed in position of 1000 ltrs capacity fixed with Brass tank nipples, including Ball brass valves suitable for 20 mm bore complete all as specified in SSR Part I Incl dismantling of existing tank and removing to store, complete all as specified and directed.

S & F in repair 15mm chromium plated health faucet (hand shower), inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated pillar tap, with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed.

S &F in repairs brass CP shower rose of size 125 mm with swivel joints fixing to steel pipes etc, complete all as specified and directed.

S & F in repair for PVC connection pipe 15mm dia for wash basin and flushing cistern with ss nuts of length 600 mm, complete all as specified and directed.

S & F in repair CP soap dish holder fixed with including chromium plated brass screws, complete all as specified and directed.

S & F in repair Glass corner shelf with tempered glass,stainless steel brackets and polished chrome finish rail all as specified and directed.

S & F in repair assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3-4 shelves, enclosed four sides by SS plain sheet, 0.6mm square support pipes, dedicated holes for spoon, pegs etc over all size 600mmx750mmx250mm of standard pattern and approved make, complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and as directed.

S&F in repair for chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange,fixed with screw wooden / plastic cleats complete all as specifed and directed.

S&F in repairs concealed type CP Stop valves, 15 mm bore of pipe, cast copper alloy CP, screwed down, high pre-ssure, with long shank and cup, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair 15 mm dia CP bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repairs 15mm dia CP angle valve, cast copper alloy, fancy type,chromium plated suitable for iron pipe and one end and PVC connector on other, ISI marked, complete all as specified and directed.

S&F in repairs gun metal globe or Brass gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specified and directed.

S & F in repair CP grating with floor trap suitable for 75 mm bore floor trap and fixed with white cement in square or circular shape and with provision of hole for waste pipe connection, complete as specified and directed.

S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S &F in repairs for 15 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass errule and fixed complete as specified and directed.

S &F in repairs for 20 mm dia Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass errule and fixed complete as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed.

Taking down shutters of any description area n exc 1 sqm each and removing, complete all as specified and directed.

S & F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings all as specified and directed.

S & F for aluminium powder coated of any colour window and ventilator with one or more shutters fixed/ side hung type without sash bar, aluminium section weighing 0.55 kg/m including 5mm thick plain/ coloured/ frosted sheet glass, stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges type B-21 100mm long , suitable handle, alum tower bolt complete all as specified and directed. (Note :- Minimum thickness of powder coating not less than 50 micron).

S & F for aluminium powder coated of any colour door with one or more shutters aluminium section weighing 0.55 kg/m including 5 mm thick plain/ coloured/ frosted sheet glass or ACP sheet and stainless steel wiremesh and connected itmes such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long , hinges type B-21 100mm long , suitable handle, alum tower bolt including mortice lock and brass door stopper, complete all as specified and directed. (Note :- Minimum thickness of powder coating not less than 50 micron).

S&F for aluminum powder coated of any color three track sliding window with two or more shutter including 5mm thick plain/ coloured/ frosted sheet glass, stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long ,SS hinges type B-21 100mm long , suitable handle, alum tower bolt and using sections as given in 'JINDAL' catlogue, including making good to the disturbed portion complete as specified and directed. (Note :- Minimum thickness of powder coating not less than 50 micron).

S & F Aluminium powder coated anodized grills with bars having 6.3mm dia decorative type 75mm mesh size complete all as specified and directed.

S&F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, holdfast with and including concrete bed block, lock strike plates, complete all as specified and directed.

S&F factory made second class Hard wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers, complete all as specified and directed.

S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed.

M & L for factory made 100% Solid WPC Door Frame 125 mm x 65 mm Single Rebated made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & manufactured by "RAJSHRI" an ISO 9001-2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of (Min. 990 N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners/ Hold Fast of required dia and lenght, , all as per specifications drawings as directed. Note: (Material test certificate and authentication should be compulsory provided by the manufacturing company).

M & L for factory made 30mm thick 100% Solid WPC laminated moulded Door shutter of required size of comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives, made from extrusion process WPC foam sheet single extruded ( inner ) with having minium density not less than 650 kg/ cbm manufactured by "RAJSHRI" an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N, (face) & 1100N (edge), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite / borer free, water / Moisture Proof & Fire retardant. WPC to be laminated with pvc foil of minium 14 microns thick of approved design pasted on both faces of shutter and fixing stainless buthinges of required sizes with necessary full body threaded star headed counter sunk ss screws, all as specified and directed. Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company)

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F of 125 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section body) desigtnation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg, complete all as specified and directed.

S&F in 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n . Exc 0.50 sqm in each pane, complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description from wooden or steel frames glazed with putty/beads, complete all as specified and directed.

S&F in repair GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S & F in repair SS curtain rod 20mm dia (of approved colour and design) with side knobs all as specified and directed. (Note: No extra payment shall be made against side knobs).

S & F in repair curtain brackets with finials of SS type (of approved colour and design) including fixing to walls with MS full screws(including fixing of wooden pieces of required size of walls) all as specified and directed.

M&L for vitrified ceramic tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in dados / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4, including dismantling of old tile complete all as specified and directed.

M&L non-skid coloured (light shade) ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM (1:3) including dismantling of existing tile, complete all as specfied and directed.

M&L for coloured glazed ceramic tiles with highlighter tile in between vertical surface 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick cement plaster in CM (1:3), including dismantling of existing tile complete all as specfied and directed.

M & L for 75mm thick cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) including demolition of old concrete, complete all as specified and directed.

S & F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at wall / ceiling, including 5mm thick PVC sheet fillet of width 35mm for wall/ceiling panelling inclusive of fixing on walls to make PVC frames complete per standard specification including dismantling of old unserviceble PVC lining of any type complete all as specified and directed.

S & F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board etc complete all as specified and directed.

RUKSANA KOSSER CONTRACTOR (BID ID -3320927)

M/S BADRI NATH GUPTA (BID ID -3336352)