Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.1 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹5.3 L+₹13,095 (2.55%)Rejected-Finance | L2 | Rejected-Finance REJECT |
Tender Value
₹5.1 L
EMD Value
₹10,136
Closing Date
12 Jun 2020, 6:00 pmClosed
Executive Engineer (C) BSNL Civil Div-I Kanpur
Executive Engineer (C) BSNL Civil Div-I Kanpur
Day to day maintenance of TE Building and Staff Quarters Compound (i/c Supply of materials) maintained by Civil Service Center at CTO, Kanpur (for 6Months).
2020_BSNL_49329_1
NIT No. 01/TCD-I/KP/2020-21
Open Tender
Civil Works
Item Rate
180 days
UNDER CSC CTO KANPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash) O/o the GMTD BSNL Kanpur
₹10,136
5 Sept 2020
30 May 2020
15 Jun 2020
30 May 2020
12 Jun 2020
30 May 2020
Amount
Part A- Services
Providing services on day to day basis (For all working days in a Month) for plumbing related civil maintenance work like repair and replacement of all sanitary fittings, cistern, all water supply line etc. Rate is inclusive of all required T&P, all consumable items except fittings & pipes. (Fittings shall be provided by the department) all complete as per direction of the Engineer-in-Charge.
Providing services on day to day basis (For all working Days in a month, only for 6 hours per day) for sewerman related civil maintenance work like removal of chowkage in sanitary and sewer lines in the colony etc. Rate is inclusive of all required T&P. (Services shall also be taken for assistances in Plumbering/ Carpentary etc. releated work) all complete as per direction of the Engineer-in-Charge.
Providing services for carpentary related to civil maintenance works (Once in a week,4 days in a month) like repair of all doors, windows, doors and windows fittings etc. Rate is inclusive of all required T&P, all consumable items except fittings. (Fittings shall be provided by the department) all complete as per direction of the Engineer-in-Charge.
Providing services on day to day basis (For all working Days in a month, only for 6 hours per day) for maintenance of existing plants (trees/shrubs/Flower beds), Cutting of grass in lawns uniformly at important locations / compounds including their required watering, weeding, trimming/clipping and manuring etc. and disposal of garbags at approved municipal dump, all complete as per the directions of the Engineer-in-Charge.
Providing services for Miscellaneous work like Aluminium Partition/ Carpentary/ Plumbering related maintenance work as per the direction of the Engineer -in-charge . (One day services will be measured as one job for payment purpose). (T & P are inclusive in basic items).
Cleaning of silt saplings, fungi, dust etc. and washing tank with lime water and disinfecting with bleaching powder using @ 150 gms. of bleaching powder for 1000 litre tank and keeping it in the tank at least three hours before flushing clean. Sludge silt should be disposed from the compound to safe municipal dumping site. The details of the tank, capacity are given below (The rate is inclusive of updating the date of cleaning.
PVC tank of capacity upto 500 litre .
PVC tank of capacity beyond 500 & upto 1000 litre.
RCC tank of capacity beyond 1000 & upto 4000 litre capacity.
RCC tank of capacity beyond 4000 & upto 8000 litre capacity.
RCC tank of capacity about 20,000 litre capacity.
Underground tank of capacity upto 50,000 litre
Underground tank of capacity about 2,00,000 litre
Cleaning of Sewer lines, Manholes and side drains including complete removal of earth, silt, slush, brick bats, garbage and other refuses and disposing off the same to an authorised municipal dump outside of compound complete as per the direction of the Engineer-in-Charge including required dewatering complete.
Sewer line of dia upto 300 mm
Manholes of depth beyond 0.90Metre
Removal of sludge from Septic Tank and cleaning the same in and around with water including disposal of sludge to an authorised municipal dump outside of compound as per direction of the Engineer-in-Charge. (Capacity of septic tank shall be measured for payment).
Cleaning of Sewer lines, Manholes and side drains including complete removal of earth, silt, slush, brick bats, garbage and other refuses and disposing off the same to an authorised municipal dump outside of compound complete as per the direction of the Engineer-in-Charge including required dewatering complete.
Trees of hight from 3.0 merte to 6.0 merte.
Trees of hight more than 6.0 merte
Credit of wood obtained from trimming of trees
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
Credit for wood recoverd from Removal of Fallen Tree (Age more than 15 years) of Aam, Neem, Eucalyptus etc. (Rate includes the cutting of fallen trees into pices and removal of same from BSNL compound at the earliest) as per the direction of Engineer-in-charge.
Part B- Materials
C.I. bracket for wash basin and sinks.
Looking Mirror 600x450 mm complete with 6mm ply
G.I. pipes 20 mm dia.
G.I. pipes 25 mm dia.
Vitreous china orrisa type W.C. pan size 580 mm
Black plastic seat (solid) with lid C.P. brass hinges and rubber buffers.
Vitreous china flat back wash basin 550 x 400 mm.
Chlorpyriphos 20% E.C. / Lindane 20% E.C.
Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm.
Plain glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm).
Nickel plated M.S. Brackets for curtain rod 20 mm.
Aluminium hanging floor door stopper with twin rubber & stopper.
Hydraulic door closer tubular type Aluminium section body.
Oxidised M.S. casement stay (straight peg type) 250 mm not less than 0.28 kg.
Flexible (Coil shaped) PVC waste pipe for sink 40 mm dia with length not less than 700 mmi/c PVC waste fittings.
15 mm PTMT bib cock.
PTMT Pillar cock.
PTMT - Waste Coupling 31/32 mm.
PTMT Ball Cock 15 mm complete with Epoxy Coated Aluminium Rod & Ball
PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & Ball
PTMT Shelf 450 x 124 x 36 mm.
Stainless steel screws 40 mm.
Stainless steel screws 75 mm.
Aluminum Sheet 24 gauge
GI Nipple 15x75mm
GI Nipple 15x100mm
GI Reducer Elbow 15x20
GI Reducer Elbow 15x25
GI Reducer Elbow 20x25
CP Brass water Jet for Eropean Seat
Aluminum door seal 1000 mm long
Rubber washer for Brass bibcock.
Roti washer for Cistern.
M Seal small size (10 Gm).
Putty for Fixing Glass in steel section window.
PVC Rawl plugs 40mm.
6 mm ply
19 mm block board
TAPECRETE
PVC cover for PVC water tank
Coarse sand
Cement
Stone aggregate 12.5 mm
Rigid PVC Pipe outer dia 20 mm
Rigid PVC Pipe outer dia 32 mm
Rigid PVC Pipe outer dia 42 mm
Rigid PVC Pipe outer dia 49 mm
PVC Water Storage Tank (Sintex or equivalent))
Brass Splender for CP Bib Cock/Piller Cock
AC plain sheet of 6 mm thick of size 600x450mm for looking mirror
Nishant Srivastava
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .