Construction of Third Floor over existing in Judicial Complex at Rewari (Pdg. E.I. internal with acessories and lifts only)

Amount

Moulded case Circuit breakers.Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

100 amp.to 220 amp.415 V,10 KA 3-phase.

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm.

M.S.Sheet. Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

(K) Distrubution board with plug and socket Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. S.P.N. enclosure for single pole MCB 20 amp.

Blanking sheet .Supply and erection of blanking sheet in existing distribution board.

(L) Miniature Circuit Breaker and Isolator.Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.

(M) Supply and erection of Fittings and Accessories.Call bell 220 / 230 volts A.C. bakelite with double coil.

Bell push with 4 metres 2-core , 0.50 sqmm (16 / 0.20 mm).PVC flexible wire.

Switch 5 amp. On existing sheet

15 amp. Switch on existing sheet .

Bakelite angle / straight button holder large size.

Ceiling rose flush / surface type .

Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job. .

(P) Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 65 mm dia.

Earthing Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

(b) Lightning conductor Galvanised iron. Excavation of earth pit 180 cm. round at top and 90 cm. at bottom 4.5 metres deep and refilling the same in hills including supply of necessary charcoal / coke and salt mixture.

Supply and erection of 60 cm. X 60 cm. X 6 mm thick galvanised Iron plate including nacessary bolts and nuts to G.I. tape .

Pdg. Standard watering tank including down pipe and C.I. cover with locking arrangement etc.

Supply and erection of 20 mm x 3 mm thick lightning conductor G.I. tape fixed with suitable G.I. stapples of same size.

Supply and erection of G.I. tape 32 mm x 6 mm thick from earth electrode directly in ground and surface , fixed with G.I. stapples of same size.

Supply and erection of 25 mm dia meter 1.5 metre long lightning G.I. tube rod tapered in to a point at the top with 16 cm. X 16 cm x 3 mm thick G.I. base plate and necessary nuts and bolts with washer.

Prioviding and fixing , testing joint made of 20mm x 3mm thick G.I. strips 125mm long with 4 Nos. G.I. bolts and nuits, check nuts with washer complete.

Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections . 25 Sq. mm 3.5 Core Ard Cable .

16 Sq. mm 4 Core Ard Cable .

(X) Miscellaneous .Supply of M.S.pipe (B-Class) for suspension rod of ceiling fan including threading if required 15 mm dia.

Supply and erection of caution notice plate in three languages.

Supply and erection of shock restoration chart in glass frame

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm).

Size 4 sqmm (7 / 0.85mm).

Size 6 sqmm ( 7 / 1.05mm).

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. 25 mm dia

Supply and erection of copper lugs including crimping etc.upto the entire satisfaction of Engineer-in-Charge of work. 1.5 sqmm to 2.5 sqmm

4 sqmm to 6 sqmm

Supply and erection of MS sadles and clamps on wall / RCC parapit for fixing underground cable at distance of 0.60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect.

Provision for Fire Alarm & Public Addressable System (P) Pipe Laying.Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

Provision for Intercom/EPABX System andComputer Wiring (LAN System)Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. 25 mm dia

Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends inspection boxes , iron hooks, cement concrete etc. complete in all respect up to the entire satisfaction of engineer in charge of work. PVC pipe of 32 mm dia

PVC pipe of 40 mm dia

Provision for CCTV System Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. 25 mm dia

Supply and erection of double door sheet, steel superline/ Powerline/ Loadline TPN vertical distribution boards suitable for TP/FP vertical MCCBs 25 KA MCCB up to 250 amp as incomer (but without cost of MCCB) fitted with bus bar, neutral link & Blanking plates complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of work. 4-way, TP & N (Vertical)

8-way, TP & N (Vertical)

12-way, TP & N (Vertical)

Supply and erection of Celing Fans 1200mm / 48" Size Crompton Greaves/ Crompton/ Bajaj / Usha / Orient approved Make complete in all respect upto the entire satisfaction of the Engineer- in -Charge of work

Supply and erection of Ex. Fans 12" Size Crompton Greaves/ Bajaj / approvedMake complete in all respect upto the entire satisfaction of the Engineer- in -Charge of work

Supply and erection of LED fitting 18w., Crompton Greaves/ / Bajaj / approved Make complete in all respect upto the entire satisfaction of the Engineer- in -Charge of work

PVC Insulated copper wiring in recessed MS conduit. Wiring for light point/ fan point/ exhaust fan point/ call bell point and 5 amp. plug point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed MS conduit with modular switch and socket, modular inner and outer plate, suitable GI box etc. with all labour, material, chasing, refelling of walls complete in all respect upto entire satisfaction of Engineer in Charge . Light Point/Exhaust fan Point Short Point

Medium Point .

Long Point .

Fan Point Point Medium Point

Long Point .

Twin control light point with 2 way 5 amp. single pole switch Long Point .

Call bell point including M.S box of size 180 mmX100 mmX 60 mm deep for Call bell Long point

3 pin 5 amp. plug point including earthing the 3rd. pin etc. Short point.

Long point.

3 pin 15 amp. plug point with 4 sq mm PVC insulated copper conductor cable including earthing the 3rd. pin etc. Long point

Supply and erection of 1 no. 16 way moduler box made of G.I. sheet with inner & outer plate including cost and fixing of 3 nos. sockets and 3 nos. switches of 10 amp and 1 no. multi socket and switch of 16/20 amp, M.S. box duly recessed in wall, cost of necessary cement and sand mixture making necessary connection complete in all respect upto the entire satisfaction of Engineer-in-charge of work. (for computer point )

Supply, erection ,testing and commissioning of electric traction passenger elevator of OTIS / KONE / MITUSUBHSHI / KINETIC HUNDAI / SCHINDLER / HITACHI / JOHNSON make suitable for 10 persons (680kg. weight) having speed @ 1meter per second to travel from ground floor + 3 upper floors with 4 stops,4 opening with ERD system and full height infra red safety and as per technical specifications attaced, upto the entire satisfaction of the Engineert -in- charge of work.

Dismentling of 3 lift 10 passenger 3 stop with labour and scrap

Annual Maintenance charges for above said 3 no. lifts after expiry of 1-year warrantee period complete with all labour & material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge.

For 1st Year after guarantee and free maintenance period

For 2nd year

For 3rd year

For 4th year

For 5th year

For 6th year

For 7th year

For 8th year

For 9th year

For10th year